Altec Lansing 120

Altec Lansing 120 Satellite Speaker System Instruction Manual

Introduzione

The Altec Lansing 120 is a two-satellite speaker system designed to enhance the audio experience for various devices. This system provides clear sound for personal computers, video gaming systems, portable CD players, MP3 players, and other audio sources. Its compact design and simple connectivity make it a versatile audio solution.

Le caratteristiche principali includono:

  • 2 Watts total Continuous Power output.
  • Compatibility with multiple audio sources including PCs, gaming systems, portable CD players, and MP3 players.
  • Integrated Power On/Off and Master Volume controls for easy operation.
  • Convenient Headphone Jack for private listening.
  • Shielded Satellites to prevent interference with other electronic devices.

Contenuto della confezione

Si prega di verificare che tutti gli articoli siano presenti nel pacco:

  • Two (2) Altec Lansing 120 Satellite Speakers
  • One (1) Audio Input Cable (3.5mm stereo jack)
  • Un (1) adattatore di alimentazione CA

Istruzioni di installazione

Follow these steps to set up your Altec Lansing 120 speaker system:

  1. Posizionamento dei relatori: Place the two satellite speakers on a stable, flat surface, ideally on either side of your listening area (e.g., computer monitor, TV) for optimal stereo sound. Ensure they are positioned to direct sound towards you.
  2. Connettiti all'alimentazione: Plug the AC power adapter into the designated power input port on one of the satellite speakers. Then, plug the other end of the power adapter into a standard wall electrical outlet.
  3. Connetti alla sorgente audio: Locate the 3.5mm audio input jack on the back of the primary satellite speaker. Connect one end of the supplied audio input cable to this jack. Connect the other end of the audio cable to the audio output jack (typically green) on your PC, gaming console, portable CD player, or MP3 player.
Altec Lansing 120 Satellite Speakers connected to a device

Image: The Altec Lansing 120 satellite speakers, showing their compact design and typical setup next to a computer monitor. The image illustrates the two speakers with their cables connected, ready for use.

Istruzioni per l'uso

Once the speakers are set up, follow these steps for operation:

  • Accensione/spegnimento: Locate the integrated power control (often combined with the volume knob) on the primary satellite speaker. Turn the knob clockwise to power on the speakers. Turn it counter-clockwise until it clicks to power off.
  • Regolazione del volume: Rotate the master volume control knob on the primary satellite speaker to increase or decrease the sound level. It is recommended to start with a low volume and gradually increase it to a comfortable listening level. Also, ensure the volume on your audio source device (PC, MP3 player, etc.) is adequately adjusted.
  • Utilizzando il jack per le cuffie: For private listening, plug your headphones into the headphone jack located on the primary satellite speaker. Plugging in headphones will automatically mute the speaker output. Unplugging the headphones will restore sound through the speakers.

Manutenzione

To ensure the longevity and optimal performance of your Altec Lansing 120 speaker system, follow these maintenance guidelines:

  • Pulizia: Use a soft, dry cloth to clean the exterior of the speakers. Avoid using liquid cleaners, aerosols, or abrasive materials, as these can damage the finish or internal components.
  • Ventilazione: Ensure that the speakers are placed in an area with adequate ventilation. Do not block any vents or openings on the speaker enclosures.
  • Magazzinaggio: If storing the speakers for an extended period, disconnect them from power and audio sources. Store them in a cool, dry place away from direct sunlight and extreme temperatures.
  • Cura del cavo: Avoid sharply bending or crimping the power and audio cables. Regularly check cables for any signs of wear or damage.

Risoluzione dei problemi

Se riscontri problemi con il tuo sistema di altoparlanti, fai riferimento ai seguenti problemi comuni e alle relative soluzioni:

ProblemaPossibile causaSoluzione
Nessun suono dagli altoparlanti
  • Altoparlanti non accesi.
  • Volume too low on speakers or audio source.
  • Cavo audio non collegato correttamente.
  • Cuffie collegate.
  • Assicurarsi che gli altoparlanti siano accesi.
  • Increase volume on both speakers and audio source.
  • Controllare tutti i collegamenti dei cavi audio.
  • Scollegare le cuffie dalla presa.
Suono distorto o poco chiaro
  • Volume troppo alto.
  • Sorgente audio di scarsa qualità.
  • Collegamenti dei cavi allentati.
  • Lower the volume on speakers and/or audio source.
  • Prova una sorgente audio diversa o file.
  • Assicurarsi che tutti i cavi siano collegati saldamente.
Funziona solo un altoparlante
  • Loose connection to the non-working speaker.
  • Cavo audio difettoso.
  • Check the connection of the non-working speaker to the primary speaker.
  • Provare un cavo audio diverso, se disponibile.

Specifiche

Technical details for the Altec Lansing 120 Satellite Speaker System:

CaratteristicaDettaglio
MarcaAltec-Lansing
Numero di modello120
Tipo di altoparlanteSatellitare
Tecnologia di connettivitàCablato
Tipo di montaggioIndipendente, montaggio a spina
Fonte di alimentazioneElettrico con cavo
Metodo di controlloRemoto (Note: Refers to integrated controls, not a separate remote unit)
ColoreNero
Codice UPC021986940029

Garanzia e supporto

For detailed warranty information, product registration, and technical support, please visit the official Altec Lansing webo contattare il servizio clienti. Conservare la ricevuta d'acquisto come prova d'acquisto per eventuali reclami in garanzia.

Nota: i termini specifici della garanzia possono variare in base alla regione e al rivenditore.

© 2024 Altec Lansing. Tutti i diritti riservati.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.