Viper 479V Responder Remote Instruction Manual

1. Prodotto finitoview

The Viper 479V Responder Remote is designed as an additional or replacement remote for compatible Viper security and remote start systems. It features up to 1/2 mile range and a premium SST LCD display for clear communication with your vehicle's system.

Image: Viper 479V Responder Remote. This image displays the front of the remote, highlighting its LCD screen and four control buttons.

Caratteristiche principali:

• Comunicazione bidirezionale: Provides visual and audible confirmation when commands are sent successfully.
• Gamma estesa: Operates with up to 1/2 mile range.
• Schermo LCD: Premium SST LCD display for clear vehicle monitoring with priority icons.
• Four-Button Control: Allows for remote locking, unlocking, and starting of your vehicle.

2. Compatibilità del sistema

This Viper 479V Responder Remote is compatible with the following Viper security and remote start systems:

• Viper 591XV
• Viper 690XV
• Viper 790XV
• Viper 791XV
• Vipera 542V
• Vipera 434V
• Vipera 554V
• Vipera 564V

Please verify your existing system's model number to ensure compatibility before programming.

3. Setup: Programming the Remote

To program your new Viper 479V Responder Remote to your vehicle's security system, follow these steps carefully. The programming process requires locating your vehicle's Valet/Programming button, which is typically installed in the vehicle itself, not on the remote.

1. Locate Valet/Programming Button: Identify the Valet/Programming button in your vehicle. Its location can vary, but it is often found under the dashboard, near the fuse box, or in the glove compartment.
2. Preparare il veicolo:
   • Open the driver's side door.
   • Inserire la chiave nell'accensione.
   • Turn the key to the "ON" position. Do not start the engine; the dash lights should illuminate.
3. Entra in modalità di programmazione:
   • For systems with remote start: Within 5 seconds of turning the key to "ON", press the Valet/Programming button once, then press and Presa it. The car's siren will chirp once, indicating entry into programming mode.
   • For systems without remote start: Press the Valet/Programming button twice, then press and Presa it. The car's siren will chirp once.
4. Programma remoto: While continuing to hold the Valet/Programming button, press the "UNLOCK" button on your new Viper 479V remote once. You will hear another chirp from the vehicle's siren, and the remote may beep, confirming successful programming.
5. Uscire dalla modalità di programmazione: Release the Valet/Programming button. Turn the key to the "OFF" position and remove it from the ignition.
6. Prova remota: Test all functions of your new remote (lock, unlock, remote start if applicable) to ensure proper operation. If the remote does not function as expected, carefully repeat the programming steps from the beginning.

If you encounter difficulties, consult your vehicle's specific alarm system manual or contact a professional installer.

4. Utilizzo del telecomando

The Viper 479V Responder Remote provides intuitive control over your vehicle's security and remote start features through its four-button layout and LCD display.

Funzioni di base:

• Serratura: Press the lock button to arm your vehicle's security system and lock the doors.
• Sbloccare: Press the unlock button to disarm your vehicle's security system and unlock the doors.
• Avvio remoto: Press the remote start button to remotely start your vehicle (if equipped and configured).
• Funzioni ausiliarie: Additional buttons may control auxiliary features depending on your system's installation.

The LCD display provides visual feedback on your vehicle's status, such as door lock status, alarm triggers, and remote start confirmation. Priority icons on the display offer a quick overview of important vehicle information.

5. Manutenzione

Sostituzione della batteria:

The Viper 479V remote requires due batterie AAA for operation. When the remote's display dims or its range decreases, it is time to replace the batteries.

1. Individuare il coperchio del vano batterie sul retro del telecomando.
2. Per aprire il vano, far scorrere o sganciare con cautela il coperchio.
3. Rimuovere le vecchie batterie AAA.
4. Inserire due batterie AAA nuove, assicurandosi della corretta polarità (+/-).
5. Riposizionare saldamente il coperchio del vano batteria.

Cura e manipolazione:

• Evitare l'esposizione all'acqua: This remote is not waterproof. Exposure to water or high humidity can cause damage and lead to malfunction.
• Proteggi dalle gocce: While durable, repeated drops or impacts can damage the internal electronics or the LCD screen.
• Pulisci delicatamente: Use a soft, dry cloth to clean the remote. Avoid harsh chemicals or abrasive materials.
• Temperature estreme: Avoid exposing the remote to extreme temperatures, such as direct sunlight in a closed vehicle for extended periods.

6. Risoluzione Dei Problemi

If you experience issues with your Viper 479V Responder Remote, consider the following troubleshooting steps:

• Il telecomando non risponde:
  • Controllare e sostituire le batterie AAA.
  • Ensure you are within the operating range of the vehicle.
  • Verify that the remote is properly programmed to your vehicle's system (refer to Section 3).
• Portata ridotta:
  • Sostituire le batterie.
  • Ensure there are no significant obstructions between the remote and the vehicle.
• Problemi relativi al display LCD:
  • Se il display è scuro o vuoto, sostituire le batterie.
  • If the display is physically damaged, the remote may need replacement.
• Pulsanti non funzionanti:
  • Assicurarsi che il telecomando sia pulito e privo di detriti attorno ai pulsanti.
  • If specific buttons consistently fail, the remote may be worn out and require replacement.
• Accidental Test Mode: Some remotes may have a small 'P' button on the back that can accidentally trigger a test mode. If this occurs, removing and reinserting the battery may reset the remote.

For persistent issues, it is recommended to consult a professional Viper installer or the product's support resources.

7. Specifiche

8. Informazioni sulla garanzia

The Viper 479V Responder Remote comes with a Garanzia del produttore di 1 annoLa presente garanzia copre i difetti di materiali e fabbricazione in condizioni di normale utilizzo. Si prega di conservare la prova d'acquisto per eventuali reclami in garanzia.

For specific details regarding warranty coverage and claims, refer to the documentation provided with your original Viper security system or contact Viper customer support.

9. Supporto

For further assistance, technical support, or inquiries not covered in this manual, please refer to the following resources:

• Viper Official Websito: Visit the official Viper websito per aggiornamenti sui prodotti, FAQ e documentazione di supporto aggiuntiva.
• Professional Installer: Contact the authorized Viper dealer or installer who installed your security system for expert assistance.
• Assistenza clienti: Refer to your product packaging or the Viper websito per informazioni di contatto del servizio clienti.