1. Introduzione
This manual provides essential instructions for the installation, maintenance, and proper use of your Wahl Professional 2-Hole Standard Clipper Blade, Model 1006. Designed for professional precision, this replacement blade ensures accurate and sharp performance for various Wahl clippers. Please read this manual thoroughly before use to ensure optimal performance and longevity of your blade.
Image 1: Wahl Professional 2-Hole Standard Clipper Blade, Model 1006.
2. Compatibilità
The Wahl Professional 2-Hole Standard Clipper Blade (Model 1006) is compatible with the following Wahl clipper models:
- Wahl Super Taper
- Wahl Super Taper II
- Wahl Icon
- Wahl Pro Basic
- Wahl Sterling 9
Image 2: Various Wahl clipper models compatible with the 2-Hole Standard Clipper Blade.
3. Contenuto della confezione
Your Wahl Professional 2-Hole Standard Clipper Blade package includes:
- 1mm-3mm Standard Clipper Blade
- Olio per lame
- Viti di montaggio
- Istruzioni per l'installazione (questo manuale)
4. Installazione della lama
Follow these steps to properly install your new clipper blade:
- Spegni: Ensure your clipper is turned off and unplugged from the power source before beginning installation.
- Rimuovere la vecchia lama: Using a screwdriver, carefully loosen and remove the two screws holding the old blade assembly to the clipper housing. Set aside the old blade and screws.
- Clean Clipper: Clean any hair or debris from the clipper's blade area using a brush.
- Position New Blade: Place the new Wahl Professional 2-Hole Standard Clipper Blade onto the clipper, aligning the holes in the blade with the screw holes on the clipper. Ensure the small moving blade is correctly seated on the drive lever.
- Lama sicura: Insert the screws and tighten them just enough to hold the blade in place, allowing for slight adjustment.
- Align Blades: Adjust the blade to ensure the top blade (cutter) is perfectly aligned with the bottom blade (comb), with the teeth of the top blade slightly behind the teeth of the bottom blade. This prevents cutting the skin.
- Serraggio finale: Once aligned, firmly tighten both screws. Do not overtighten.
- Lubrificare: Apply a few drops of Wahl clipper oil to the teeth of the new blade.
Immagine 3: Dettagliata view of the 2-Hole Standard Clipper Blade, highlighting its design and dimensions.
5. Manutenzione
Proper maintenance is crucial for extending the life and performance of your clipper blade.
5.1 Lubrificazione delle lame
Regular oiling reduces friction, prevents rusting, and ensures smooth cutting performance. Wahl's high-carbon blades benefit significantly from consistent lubrication.
- Applicare olio: With the clipper turned off, apply a drop of Wahl clipper oil to each corner of the top blade and one drop to the foot of the blade.
- Distribute Oil: Turn the clipper on for a few seconds to allow the oil to work its way into the blades.
- Pulisci l'eccesso: Rimuovere l'olio in eccesso con un panno pulito.
It is recommended to oil your blades before or after each use, especially if the clipper feels sluggish or pulls hair.
Video 1: Demonstrates how to oil clipper blades to prevent pulling and ensure smooth operation.
5.2 Pulizia delle lame
After each use, brush off any loose hair from the blades. For a deeper clean, especially after prolonged use or if hair buildup is noticeable:
- Spazzolare i capelli: Use a small cleaning brush to remove hair from between the blade teeth.
- Disinfect (Optional): For professional use, consider using a clipper disinfectant spray (e.g., Wahl Clini-Clip Spray) to sanitize the blades. Follow the product's instructions.
- Oliare nuovamente: Always re-oil the blades after cleaning or disinfecting to prevent rust and maintain lubrication.
Image 4: Essential maintenance products for Wahl clippers, including blade oil and disinfectant spray.
6. Risoluzione Dei Problemi
| Problema | Possibile causa | Soluzione |
|---|---|---|
| Il tagliacapelli tira o impiglia i capelli | Le lame sono smussate, sporche o non adeguatamente oliate. | Clean and oil the blades. If the problem persists, the blades may need sharpening or replacement. |
| Blades are rusting | Insufficient oiling or exposure to moisture. | Ensure blades are thoroughly dried after cleaning and regularly oiled, especially in humid environments. |
| La lama non taglia in modo efficace | Improper blade alignment or worn blades. | Check blade alignment as per installation instructions. If blades are old, consider replacing them. |
7. Specifiche
- Nome del prodotto: 2-Hole Standard Clipper Blade
- Numero modello: 1006
- Marca: Wahl professionista
- Lunghezza di taglio: 1mm-3mm (Standard)
- Materiale: Acciaio ad alto tenore di carbonio
- Dimensioni: 2 x 0.1 x 3 pollici
- Peso dell'articolo: 0.8 once
- Codice UPC: 785085010068, 043917100609
- Produttore: Wahl professionista
- Origine: Prodotto negli USA
8. Garanzia e supporto
For warranty information, product support, or to purchase additional accessories, please visit the official Wahl Professional webo contattare il servizio clienti. Conservare la ricevuta d'acquisto come prova d'acquisto per eventuali reclami in garanzia.
Wahl professionista Websito: www.wahlpro.com