Sony ECMHW1 Bluetooth Wireless Microphone User Manual

1. Introduzione

The Sony ECMHW1 is a Bluetooth wireless microphone designed to capture high-quality audio for compatible Sony camcorders. Utilizing Bluetooth technology, it allows for wireless audio recording from a distance, enhancing the audio capabilities of your video recordings. This manual provides essential information for the proper setup, operation, and maintenance of your ECMHW1 wireless microphone.

2. Informazioni sulla sicurezza

• Non esporre l'unità a temperature estreme, alla luce solare diretta o a elevata umidità.
• Tenere l'unità lontana dall'acqua e da altri liquidi.
• Use only the specified AAA batteries. Ensure correct polarity when inserting batteries.
• Non tentare di smontare o modificare l'unità. Per la manutenzione, rivolgersi a personale qualificato.
• Tenere fuori dalla portata dei bambini.
• Smaltire le batterie e il prodotto secondo le normative locali.

3. Contenuto della confezione

Verifica che tutti gli articoli elencati di seguito siano inclusi nel tuo pacchetto:

• Wireless Microphone (Transmitter)
• Unità ricevente
• Fascia da braccio
• cordino
• Clip
• Schermo del vento
• Borsa da trasporto
• Battery (2 AAA batteries required, may be included or sold separately)

4. Impostazione

4.1. Installazione della batteria

1. Open the battery compartment on the wireless microphone (transmitter).
2. Insert two (2) AAA batteries, ensuring the correct positive (+) and negative (-) polarity.
3. Chiudere bene il vano batterie.

Note: The receiver unit draws power directly from the camcorder's Active Interface Shoe and does not require separate batteries.

4.2. Attaching the Receiver to the Camcorder

1. Locate the Active Interface Shoe (AIS) on your compatible Sony camcorder.
2. Slide the receiver unit onto the AIS until it clicks into place.
3. Ensure the receiver is firmly attached to prevent accidental detachment during recording.

Figura 1: The Sony ECMHW1 wireless microphone receiver (left) and transmitter (right). The receiver attaches to the camcorder's Active Interface Shoe, while the transmitter is worn by the subject.

4.3. Pairing the Microphone and Receiver

1. Turn on your camcorder. This will power on the receiver unit.
2. Turn on the wireless microphone (transmitter).
3. The blue indicator lights on both the microphone and receiver should glow solid blue when a successful Bluetooth connection is established. If they flash, pairing is in progress or unsuccessful. Refer to the troubleshooting section if connection issues persist.

5. Istruzioni per l'uso

5.1. Posizionamento del microfono

The wireless microphone (transmitter) can be worn by the subject using the provided accessories:

• Clip: Attach the microphone to clothing, such as a lapel or collar, for discreet placement.
• Bracciale: Secure the microphone to the subject's arm, suitable for active scenarios.
• Cordino: Wear the microphone around the neck for easy access and positioning.

For optimal sound quality, position the microphone approximately 6-12 inches (15-30 cm) from the sound source. Use the included wind screen to reduce wind noise when recording outdoors.

5.2. Recording Range

The ECMHW1 offers a wireless range of up to 30 meters (approximately 100 feet) under optimal conditions. Environmental factors such as obstacles, electromagnetic interference, and other Bluetooth devices may affect the effective range.

5.3. 5.1 Channel Surround Sound Recording

When used with compatible camcorders that support 5.1 channel surround sound recording, the ECMHW1 can function as the center channel microphone. This allows for clear capture of the main subject's voice while the camcorder's built-in microphones capture ambient sound, creating an immersive audio experience. Consult your camcorder's manual for specific settings related to 5.1 channel audio input.

6. Manutenzione

• Pulizia: Wipe the microphone and receiver with a soft, dry cloth. Do not use abrasive cleaners or solvents.
• Sostituzione della batteria: Replace AAA batteries in the transmitter when the indicator light shows low power or the connection becomes unstable. Always use fresh batteries.
• Magazzinaggio: When not in use, store the microphone and receiver in the provided carrying pouch in a cool, dry place, away from direct sunlight and extreme temperatures. Remove batteries if storing for extended periods.

7. Risoluzione Dei Problemi

8. Specifiche

• Numero modello: ECMHW1
• Marca: Sony
• Tecnologia di connettività: Bluetooth
• Tipo di connettore: Senza fili
• Dispositivi compatibili: Camcorder (Sony DVR-DVD405, 505, HDR-SR1, UX1 & DCR-SR60, SR80, SR100 Camcorders)
• Colore: Nero
• Fattore di forma del microfono: Lavalier
• Fonte di energia: Battery Powered (Transmitter), Camcorder (Receiver)
• Number of Batteries (Transmitter): Sono necessarie 2 batterie AAA
• Rapporto segnale-rumore: 100 dB
• Numero di canali: 5 (for 5.1 channel recording)
• Peso dell'articolo: 0.6 libbre (circa 272 g)
• Dimensioni dell'articolo: 4.8 x 6.5 x 3.5 pollici (circa 12.2 x 16.5 x 8.9 cm)
• Produttore: Sony

9. Garanzia e supporto

For warranty information and customer support, please refer to the documentation included with your purchase or visit the official Sony support websito. Conservare la prova d'acquisto per eventuali reclami in garanzia.