Westek 6043BC

Westek 6043BC Touch Pad Dimmer Instruction Manual

Modello: 6043BC

Introduzione

The Westek 6043BC Touch Pad Dimmer is designed to convert any standard incandescent lamp into a touch-controlled dimmable lamp. This device allows you to easily adjust the light output with a simple touch, offering three levels of illumination. It is compatible with incandescent bulbs up to 200 Watts. This manual provides detailed instructions for safe installation, operation, and maintenance of your touch pad dimmer.

Caratteristiche del prodotto

  • Touch Light Control: Simply touch the pad to turn the light on or change the illumination level.
  • Luminosità regolabile: Offers three distinct light settings, ranging from a low night light to full brightness.
  • Design pratico: Works with incandescent bulbs up to 200 Watts, eliminating the need for specialized 3-way bulbs.
  • Stile moderno: Features a contemporary black finish and sleek design that complements various home decors.
  • Installazione semplice: Designed for simple plug-in functionality to add dimmer capabilities to your existing table or floor lamps.

Informazioni sulla sicurezza

Please read and understand all instructions before installation and use. Retain this manual for future reference.

  • Solo per uso interno.
  • Non superare il limite massimo di wattage of 200 Watts for incandescent bulbs.
  • Assicurare lamp is unplugged from the wall outlet before installation.
  • Avoid using with LED or CFL bulbs unless specifically rated as dimmable and compatible with touch dimmers. Incompatible bulbs may flicker or be damaged.
  • Do not use this dimmer control with another dimmer in the same circuit.
  • Tenere lontano dall'acqua e dall'umidità.

Configurazione e installazione

Follow these steps to install your Westek 6043BC Touch Pad Dimmer:

  1. Prepara il Lamp: Garantisci la tua lamp is unplugged from the wall outlet. Replace the existing light bulb with a standard incandescent bulb (up to 200 Watts).
  2. Connect the Dimmer: Collegare lamp's power cord into the receptacle on the Westek 6043BC dimmer unit.
  3. Collegare alla presa a muro: Plug the dimmer unit into a standard wall outlet.
  4. Position the Touch Pad: Place the touch pad in a convenient location. The touch pad is designed to detect contact with any metallic conductive surface, which then controls the lamp. Ensure the touch pad wire is not pinched or damaged.
Back of Westek 6043BC packaging showing installation diagram

Figure 1: Installation diagram from product packaging. Shows how to connect the lamp to the dimmer and the dimmer to the wall outlet, along with the touch pad connection.

Westek 6043BC Touch Pad Dimmer main unit with plug

Figure 2: The main dimmer unit, which plugs into the wall and accepts the lamp's plug.

Westek 6043BC Touch Pad Dimmer touch pad

Figure 3: The circular touch pad component, which is used to control the lamp.

Istruzioni per l'uso

Once installed, operate the dimmer as follows:

  1. Turn On/Adjust Brightness: Lightly touch the metal touch pad. The lamp will cycle through three brightness levels: low, medium, and high.
  2. Spegnere: After the high brightness setting, touching the pad again will turn the lamp spento.
  3. potere fuoritage: In caso di mancanza di correntetage, the dimmer may reset. Simply touch the pad to resume normal operation.

Manutenzione

The Westek 6043BC Touch Pad Dimmer requires minimal maintenance. Ensure the unit and its connections are kept clean and dry. Do not attempt to open or repair the unit yourself, as this may void the warranty and pose a safety risk.

Risoluzione dei problemi

ProblemaPossibile causaSoluzione
Lamp does not turn on or dim.
  • Lamp not properly plugged into dimmer.
  • Dimmer not properly plugged into wall outlet.
  • Lamp's internal switch is off.
  • Incompatible bulb (LED/CFL).
  • Lampadina difettosa.
  • Potenza fuoritage o l'interruttore automatico è scattato.
  • Assicurare lamp cord is fully inserted into the dimmer.
  • Ensure dimmer is fully inserted into a working wall outlet.
  • Girare la lamp's original switch to the ON position.
  • Replace with a standard incandescent bulb (up to 200W).
  • Sostituire la lampadina.
  • Check your home's power supply and circuit breakers.
Lamp sfarfallii o ronzii.
  • Incompatible bulb (LED/CFL).
  • Collegamento della lampadina allentato.
  • Replace with a standard incandescent bulb (up to 200W).
  • Stringere la lampadina nel suo portalampada.
Lamp turns on by itself occasionally.
  • Electrical interference (e.g., during thunderstorms, power fluctuations).
  • This can be normal behavior during electrical disturbances. Simply touch the pad to turn it off.

Specifiche

  • Modello: 6043 a.C.
  • Marca: Ovest
  • Modalità operativa: ON-NONE-OFF (3-level dimming)
  • Watt massimotage: 200 Watts (Incandescent bulbs only)
  • Voltage: 120V, 60Hz
  • Metodo di controllo: Tocco
  • Dimensioni articolo (L x P x A): 3.9 x 1 x 7.9 pollici
  • Peso dell'articolo: 3.8 once
  • Materiale: Multi (Brass contact material)
  • Colore: Nero
  • Solo per uso interno: SÌ

Garanzia e supporto

The Westek 6043BC Touch Pad Dimmer comes with a limited warranty. For specific warranty details, please refer to the product packaging or contact Westek customer support. For technical assistance or further inquiries, please visit the official Westek websito o contattare il loro servizio clienti.

Produttore: AmerTac

Assistenza clienti: 201.661.9945

Websito: www.amertac.com

© 2024 Westek. Tutti i diritti riservati.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.