Introduzione
Thank you for choosing the Einhell GP Niro Jet 1300 Garden Pump. This pump is designed for efficient and quiet water transfer, making it ideal for garden irrigation, domestic water supply, and other similar applications. Its robust stainless steel housing ensures durability and prevents water discoloration. This manual provides essential information for the safe and effective setup, operation, and maintenance of your pump.
Istruzioni di sicurezza
Sicurezza generale:
- Read this manual completely before operating the pump.
- Assicurarsi che la pompa sia posizionata su una superficie stabile e piana.
- Protect the pump from frost and direct sunlight.
- Never operate the pump without water (dry running).
- Ensure the electrical supply matches the pump's specifications (230 V ~50 Hz).
- Scollegare sempre l'alimentazione elettrica prima di effettuare qualsiasi operazione di manutenzione o pulizia.
- Tenere i bambini e le persone non autorizzate lontano dalla pompa durante il funzionamento.
Componenti del prodotto
The Einhell GP Niro Jet 1300 Garden Pump features a durable design with user-friendly components.
Figura 1: Sopraview of the Einhell GP Niro Jet 1300 Garden Pump. This image displays the complete pump unit, highlighting its stainless steel body and robust blue motor housing.
Figura 2: Detail of the pump's integrated carrying handle and the clearly visible red ON/OFF switch located on the yellow control box. This switch allows for easy operation.
- Maniglia per il trasporto: Per un facile trasporto della pompa.
- Interruttore ON/OFF: Controls the power to the pump.
- Water Inlet (Suction Connection): Where water enters the pump.
- Water Outlet (Pressure Connection): Where water exits the pump.
- Water Filling Screw: Used to prime the pump by filling it with water.
- Tappo di scarico: For emptying the pump, especially before winter storage.
- Alloggiamento del motore: Protects the powerful asynchronous motor.
- Stainless Steel Pump Housing: Corrosion-resistant and durable.
Istruzioni di installazione
- Disimballaggio: Carefully remove the pump from its packaging. Check for any transport damage.
- Posizionamento: Position the pump on a firm, level, and stable surface. Ensure it is protected from direct weather conditions (rain, frost) and has adequate ventilation. The pump should be as close as possible to the water source, with a maximum suction height of 6 meters.
- Collegamento del tubo di aspirazione: Attach a suitable suction hose (minimum 1" diameter) to the water inlet. Ensure all connections are airtight to prevent air from entering the pump, which can impair performance. It is recommended to use a foot valve with a filter at the end of the suction hose in the water source.
- Connecting the Discharge Hose: Connect the discharge hose (minimum 1" diameter) to the water outlet. Secure all connections tightly.
- Adescamento della pompa: Before initial operation, the pump must be filled with water. Unscrew the water filling screw and slowly pour water into the pump housing until it is completely full. Replace the water filling screw securely. This step is crucial to prevent dry running.
- Collegamento elettrico: Connect the pump to a properly grounded 230 V ~50 Hz power outlet. Ensure the power cable is not damaged and is routed safely to avoid tripping hazards.
Istruzioni per l'uso
- Avvio della pompa: After ensuring the pump is primed and all connections are secure, switch the pump ON using the red ON/OFF switch (Figure 2). The pump will begin to draw water.
- Operazione di monitoraggio: Observe the pump during the first few minutes of operation to ensure it is functioning correctly and water is flowing.
- Arresto della pompa: To stop the pump, switch the ON/OFF switch to the OFF position.
- Nota importante: Never allow the pump to run dry. Dry running can cause severe damage to the pump. If the water source runs out, immediately switch off the pump.
Manutenzione
Regular maintenance ensures the longevity and optimal performance of your Einhell GP Niro Jet 1300 Garden Pump.
- Pulizia: Pulire periodicamente l'esterno della pompa con un detergenteamp panno. Non usare detergenti abrasivi o solventi.
- Controllare le connessioni: Regularly inspect all hose connections for leaks and ensure they are tight.
- Manutenzione del filtro: If a pre-filter is used on the suction line, clean it regularly according to its manufacturer's instructions.
- Rimessaggio invernale: Before the first frost, completely drain all water from the pump. Unscrew the drain plug and the water filling screw to ensure all water escapes. Store the pump in a frost-free, dry location.
Risoluzione dei problemi
| Problema | Possibile causa | Soluzione |
|---|---|---|
| La pompa non si avvia. | No power supply; ON/OFF switch is OFF; Motor overload protection activated. | Check power connection and fuse; Switch ON the pump; Allow motor to cool down, then restart. |
| La pompa funziona ma non eroga acqua. | Pump not primed; Air in suction line; Suction height too high; Foot valve clogged or not submerged. | Prime the pump completely; Check suction line for leaks; Reduce suction height; Clean foot valve and ensure it is submerged. |
| Low delivery pressure. | Partial air in suction line; Discharge hose kinked or too small diameter; Filter clogged. | Check suction line for leaks; Ensure discharge hose is clear and of adequate diameter; Clean any filters. |
| La pompa è insolitamente rumorosa. | Air in the pump; Dry running; Foreign object in pump. | Prime the pump; Immediately switch off if dry running; Disconnect power and inspect for obstructions (consult service if necessary). |
Specifiche tecniche
- Modello: GP Niro Jet 1300
- Numero articolo: 4182220
- Alimentazione elettrica: 230V~50Hz
- Consumo energetico: 1100 L
- Max. Portata: Approximately 6000 l/h (at 0m head)
- Flow Rate at 10m Head: 4100 litri/ora
- Flow Rate at 20m Head: 3800 litri/ora
- Flow Rate at 30m Head: 2400 litri/ora
- Massimo. Altezza di consegna: 48 metri
- Pressione massima: 4.8 barre
- Massimo. Altezza di aspirazione: 6 metri
- Temperatura massima dell'acqua: 35 °C
- Suction/Pressure Connection: R 1"
- Materiale: Acciaio inossidabile (alloggiamento)
- Dimensioni (L x P x A): Dimensioni: 400 mm x 210 mm x 230 mm
- Peso: 9.9 kg
Garanzia e supporto
This Einhell product is covered by the manufacturer's warranty. Please refer to the warranty card included with your purchase for specific terms and conditions. For technical support, spare parts, or warranty claims, please contact your authorized Einhell dealer or visit the official Einhell websito per informazioni sul servizio clienti.
Einhell Ufficiale Websito: www.einhell.com