OSRAM SPC. LIN 1613

OSRAM Special LINESTRA S14d 35W 230V Opal Tubular Lamp Manuale di istruzioni

Model: SPC. LIN 1613

1. Introduzione

Thank you for choosing the OSRAM Special LINESTRA S14d 35W 230V Opal Tubular Lamp. This instruction manual provides important information for the safe and efficient use of your product. Please read this manual carefully before installation and retain it for future reference. This lamp is designed to provide beautiful, soft light, primarily for mirror lighting applications.

Informazioni importanti sulla sicurezza: Always ensure the power supply is disconnected before installing or replacing the lamp. Use only in luminaires approved for this type of lampQuesto lamp is not shockproof and is not suitable for use in ovens or refrigerators.

2. Prodotto finitoview

OSRAM Special LINESTRA S14d 35W 230V Opal Tubular Lamp

Immagine 1: The OSRAM Special LINESTRA S14d 35W 230V Opal Tubular Lamp. This image shows the elongated, cylindrical shape of the lamp with its S14d base connector. The lamp features an opal finish for diffused light.

The OSRAM Special LINESTRA lamp is a tubular incandescent lamp with an S14d base. It is designed for specific lighting fixtures, often found in bathrooms or decorative applications where linear light sources are preferred. Its opal finish ensures a uniform and glare-free light distribution.

3. Installazione e configurazione

  1. La sicurezza prima di tutto: Before attempting any installation, ensure the power supply to the fixture is completely switched off at the main circuit breaker.
  2. Controlla la compatibilità: Verify that your lighting fixture is designed for an S14d base and can safely accommodate a 35W, 230V lamp. Refer to your fixture's manual for specifications.
  3. Disimballare la Lamp: Rimuovere con cautela il lamp from its packaging. Handle the lamp by its base or ends to avoid touching the glass surface directly, as oils from your skin can reduce lamp vita.
  4. Inserisci la Lamp: Align the S14d base pins with the corresponding slots in the lamp holder. Gently push and slide the lamp into place until it is securely seated. Do not force the lamp.
  5. Ripristina alimentazione: Una volta la lamp is securely installed, restore power to the fixture at the main circuit breaker.
  6. Operazione di prova: Switch on the light to confirm proper installation and functionality.

Attenzione: Non superare il limite massimo di wattage specified for your lighting fixture. Overloading can cause overheating and fire hazards.

4. Istruzioni per l'uso

The OSRAM Special LINESTRA lamp operates like a standard incandescent bulb. Once installed in a compatible fixture and power is supplied, it will illuminate when the fixture's switch is turned on.

  • Accensione/Spegnimento: Use the wall switch or the switch integrated into your lighting fixture to turn the lamp acceso o spento.
  • Uso previsto: Questo lamp is primarily intended for indoor use, particularly for mirror lighting and other decorative applications where a linear light source is desired.

5. Manutenzione

  • Pulizia: Assicurare lamp è freddo e l'alimentazione è spenta prima di pulire. Pulire lamp gently with a soft, dry cloth. Do not use liquid cleaners or abrasive materials, as these can damage the lampla superficie o i componenti interni.
  • Lamp Sostituzione: Quando la lamp reaches the end of its life (average nominal lifetime is 1000 hours), it will cease to function. To replace it, follow the installation steps in Section 3, ensuring the power is off before removing the old lamp and installing a new one. Dispose of old lampsecondo le normative locali.

6. Risoluzione Dei Problemi

ProblemaPossibile causaSoluzione
Lamp non si accende.
  • Nessuna alimentazione al dispositivo.
  • Lamp non correttamente seduto.
  • Lamp ha raggiunto la fine della sua vita.
  • Faulty fixture switch or wiring.
  • Controllare l'interruttore automatico e l'interruttore a parete.
  • Assicurare lamp is securely inserted into the S14d base.
  • Sostituisci la lamp con uno nuovo.
  • Consultare un elettricista qualificato per ispezionare l'apparecchio.
Lamp sfarfallio.
  • Collegamento allentato.
  • Voltage fluttuazioni.
  • Lamp avvicinarsi alla fine della vita.
  • Spegnere l'alimentazione, riposizionare l'lamp.
  • Garantire un'alimentazione elettrica stabile.
  • Sostituisci la lamp.

Se le procedure di risoluzione dei problemi non risolvono il problema, contattare l'assistenza clienti o un elettricista qualificato.

7. Specifiche

Numero modello:SPC. LIN 1613
Marca:OSRAM
Lamp Tipo:Special LINESTRA Tubular Incandescent Lamp
Consumo energetico:35 L
Voltage:230 Volt
Flusso luminoso:240 lumen
Tipo di base:S14d
Fine:Opale
Average Nominal Lifetime:1000 ore
Classe di efficienza energetica:G
Diametro:30 millimetri
Lunghezza totale:300 millimetri
Bulb Dimensions (Diameter x Length):Dimensioni: 30 mm x 300 mm
Peso:30 grammi
Antiurto:NO
Suitable for Oven:NO
Suitable for Refrigerator:NO

8. Informazioni sulla sicurezza

  • Rischio elettrico: Always disconnect power before installing, removing, or cleaning the lamp.
  • Calore: Incandescenteamps generate heat. Do not touch the lamp when it is operating or immediately after it has been switched off. Allow it to cool down before handling.
  • Compatibilità degli apparecchi: Usa questo lamp only in fixtures specifically designed for S14d base tubular lamps e classificato per lampEcco cosatage e vol.tage.
  • Rottura: Questo lamp is not shockproof. Handle with care to prevent breakage. If the lamp breaks, carefully clean up glass fragments.
  • Disposizione: Smaltire l'usato lamps according to local environmental regulations.

9. Garanzia e supporto

For warranty information or technical support, please refer to the official OSRAM websito o contatta il tuo rivenditore. Conserva la ricevuta d'acquisto come prova d'acquisto.

Visit OSRAM Official Websito

© 2023 OSRAM. Tutti i diritti riservati. Le informazioni sono soggette a modifiche senza preavviso.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.