Behringer DD600

Behringer DIGITAL DELAY DD600 User Manual

Digital Stereo Delay/Echo Effects Pedal

Introduzione

Welcome to the user manual for the Behringer DIGITAL DELAY DD600 Digital Stereo Delay/Echo Effects Pedal. This manual provides essential information for setting up, operating, maintaining, and troubleshooting your device.

The DD600 is designed to provide a wide range of digital delay and echo effects for musical instruments, particularly electric guitars. It features 11 different delay modes and high-resolution 24-bit processing.

Importanti istruzioni di sicurezza

Leggere queste istruzioni.
Conservare queste istruzioni.
Prestate attenzione a tutti gli avvertimenti.
Seguire tutte le istruzioni.
Non utilizzare questo apparecchio vicino all'acqua.
Pulire solo con un panno asciutto.
Non ostruire le aperture di ventilazione. Installare secondo le istruzioni del produttore.
Non installare vicino a fonti di calore come radiatori, bocchette di riscaldamento, stufe o altri apparecchi (inclusi amplificatori) che producono calore.
Utilizzare solo accessori/componenti specificati dal produttore.
Affidare tutti gli interventi di assistenza a personale qualificato.

Caratteristiche principali

Ultimate digital Delay/Echo effects pedal with 11 different modes.
Real Sound Modeling (RSM) technology for emulating acoustic environments.
24-bit high-resolution stereo delay/echo/panning with delay time up to 2 seconds.
Dedicated Mode, Delay Time, Feedback, and Level controls for sound shaping.
Blue status LED for effect on/off and battery check.

Controlli e connettori

Familiarize yourself with the controls and connectors on your DD600 pedal.

Behringer DD600 Digital Delay Pedal with controls labeled — This image shows the Behringer DD600 Digital Delay pedal. Key controls visible include: **LIVELLO** knob (Min/Max), **F. INDIETRO** (Feedback) knob (Min/Max), **D.TIME** (Delay Time) knob (Min/Max), and **MODE/TEMPO** knob. The pedal also features an **ACCESO/BATT** Indicatore LED, IN (input) and **FUORI A** (output) jacks, and a **PAN OUT** jack for stereo output. The large foot switch at the bottom is labeled **BEHRINGER**.

Manopola LIVELLO: Adjusts the output level of the delayed signal.

F.BACK (Feedback) Knob: Controls the amount of delayed signal fed back into the input, affecting the number of repeats.

D.TIME (Delay Time) Knob: Sets the duration of the delay effect, from minimum to maximum (up to 2 seconds).

MODE/TEMPO Knob: Selects between 11 different delay modes and can be used for tap tempo functionality.

ON/BATT LED: Indicates when the effect is active and serves as a battery check indicator.

Nel Jack: Input for your instrument cable.

OUT A Jack: Main output for the processed signal.

PAN OUT Jack: Secondary output for stereo delay effects.

Interruttore a pedale: Activates or deactivates the effect.

Impostare

Alimentazione elettrica

The DD600 can be powered by a 9V battery or an optional 9V DC power adapter (not included).

Installazione della batteria:

Press the two hinges on the side of the pedal to open the battery compartment.
Connect a 9V battery to the battery clip.
Place the battery inside the compartment and close the lid securely.

Adattatore di alimentazione esterno:

Connect a 9V DC, 100mA (minimum) power adapter with a center-negative plug to the DC input jack. Using an external power supply will automatically disconnect the battery.

Connessioni

Configurazione mono:

Collega il tuo strumento (ad esempio, la chitarra) al IN jack of the DD600.
Collegare il FUORI A jack of the DD600 to your ampcontributo del lificatore.

Configurazione stereo:

Collega il tuo strumento al IN cricco.
Collegare FUORI A to the input of your first amppiù vivace.
Collegare PAN OUT to the input of your second amppiù vivace.

Istruzioni per l'uso

Funzionamento di base

Activating the Effect: Press the footswitch to toggle the effect on or off. The blue LED will illuminate when the effect is active.

Regolazione dei parametri di ritardo: Utilizzare il LIVELLO, F. INDIETRO, E D.TIME knobs to fine-tune your desired delay sound.

Modalità di ritardo

IL MODE/TEMPO knob allows selection of 11 distinct delay modes:

Ritardo: Standard digital delay.
Nastro: Emulates the warm, modulated sound of analog tape echo.
Inversione: Plays the delayed signal backward.
Presa: Loops a short phrase (up to 2 seconds).
Pan: Creates a stereo panning delay effect.
Modulate: Adds modulation to the delay repeats.
Eco: Classic echo effect.
Schiaffo: Short, single repeat delay for a "slapback" effect.
Ping Pong: Alternates delay repeats between left and right channels in stereo.
Analogico: Simulates the decay characteristics of analog delays.
Cancello: A gated delay effect.

Funzione Tap Tempo

To use the tap tempo feature, hold down the footswitch for approximately 2 seconds until the LED flashes. Then, tap the footswitch two or more times at your desired tempo. The delay time will synchronize with your taps.

Nota: The tap tempo function is available in most delay modes.

Manutenzione

The Behringer DD600 requires minimal maintenance.

Pulizia: Clean the pedal with a soft, dry cloth. Do not use abrasive cleaners or solvents.
Sostituzione della batteria: Replace the 9V battery when the blue LED dims or fails to illuminate, indicating low power.
Magazzinaggio: If storing the pedal for an extended period, remove the battery to prevent leakage. Store in a cool, dry place.

Risoluzione dei problemi

Problema	Possibile causa	Soluzione
Nessun suono o suono debole.	Incorrect connections, dead battery, faulty cable, or incorrect settings.	Check all cable connections. Replace the 9V battery or use a power adapter. Test with different cables. Ensure LEVEL knob is not at minimum.
Effect not engaging.	Footswitch not pressed, power issue.	Press the footswitch firmly. Check power supply (battery or adapter).
Rumore o ronzio indesiderati.	Ground loop, faulty power supply, or interference.	Use a regulated power supply. Try a different power outlet. Ensure all cables are in good condition. Isolate the pedal from other noisy equipment.
Delay time not changing.	D.TIME knob not adjusted, or in a mode that overrides manual time setting.	Rotate the D.TIME knob. Check the selected MODE. If using tap tempo, ensure it's disengaged or re-tap.

Specifiche

Modello: Behringer DD600
Tipo di effetto: Digital Delay/Echo
Numero di modalità: 11
Elaborazione: 24-bit high-resolution
Tempo di ritardo massimo: Fino a 2 secondi
Ingressi: 1/4-inch TS (IN)
Risultati: 1/4-inch TS (OUT A, PAN OUT)
Alimentazione elettrica: 9V DC (battery or optional power adapter)
Dimensioni (A x L x P): Circa 2.13 x 2.76 x 4.84 pollici (54 x 70 x 123 mm)
Peso: Circa 0.73 libbre (0.33 kg)
Colore: Blu

Garanzia e supporto

Per informazioni dettagliate sulla garanzia e sul supporto tecnico, fare riferimento al sito ufficiale Behringer websito o contattare il servizio clienti. Conservare la ricevuta d'acquisto come prova d'acquisto.

Risorse online:

Behringer Official Websito: www.behringer.com
Pagina di supporto al prodotto: (Specific link not provided, refer to main websito)

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.