Schwinn SW569 13-Function Wireless Bike Computer User Manual

1. Introduzione

The Schwinn SW569 13-Function Wireless Bike Computer provides essential cycling data without the need for cumbersome wires. This device accurately measures speed, time, and distance, along with other training functions, to enhance your cycling experience. Its wireless design ensures a clean installation and reliable performance.

This manual provides detailed instructions for the installation, operation, maintenance, and troubleshooting of your new bike computer.

2. Contenuto della confezione

Verifica che tutti i seguenti componenti siano inclusi nel pacchetto:

• Schwinn 13-Function Wireless Bike Computer Unit (LCD Display)
• Wireless Speed Sensor/Transmitter
• Magnete a ruota
• Staffa di montaggio del manubrio
• Zip Ties for Installation
• Batteries (typically pre-installed or included)

Image: All components of the Schwinn Wireless Bike Computer, including the main display unit, wireless sensor, wheel magnet, mounting bracket, and zip ties.

3. Guida all'installazione

Follow these steps to correctly install your Schwinn Wireless Bike Computer.

3.1. Installazione della batteria

The computer unit and wireless sensor require batteries for operation. Typically, these are coin-cell batteries (e.g., CR2032). Open the battery compartment on the back of the computer unit and the sensor, insert the batteries with the correct polarity, and securely close the compartments.

3.2. Montaggio dell'unità computer

1. Attach the handlebar mounting bracket to your bicycle's handlebar using the provided zip ties. Ensure it is securely fastened and positioned for easy viewing.
2. Slide the computer unit onto the mounting bracket until it clicks into place.

3.3. Mounting the Wireless Speed Sensor

1. Attach the wireless speed sensor to the front fork of your bicycle using the provided zip ties. Position it on the side of the fork that aligns with the wheel spokes.
2. Ensure the sensor is oriented correctly, with the arrow or designated marking pointing towards the wheel magnet's path.

3.4. Attaching the Wheel Magnet

1. Securely attach the wheel magnet to a spoke on the front wheel.
2. Adjust the magnet's position so that it passes the wireless sensor with a gap of no more than 5mm (0.2 inches). The closer the magnet is to the sensor without touching, the more reliable the signal.

Image: The main computer display unit and the wireless speed sensor, illustrating their relative sizes and design.

4. Funzionamento

Your Schwinn Wireless Bike Computer features 13 functions to track your ride data. The large LCD screen displays information clearly, and operations are managed via integrated buttons.

4.1. Funzioni di base

• Velocità attuale: Visualizza la velocità della tua pedalata in tempo reale.
• Velocità media: Calculates the average speed of your current ride.
• Velocità massima: Registra la velocità più alta raggiunta durante la corsa.
• Distanza del viaggio: Misura la distanza percorsa durante il tuo attuale tragitto.
• Odometro: Tracks the total accumulated distance across all rides.
• Tempo di percorrenza: Records the duration of your current ride.
• Orologio: Displays the current time (12/24 hour format).

4.2. Funzioni avanzate

• Modalità di scansione: Automatically cycles through various data displays.
• Speed Comparator: Indicates if your current speed is above or below your average speed.
• Calorie bruciate: Estimates calorie consumption (requires user input for weight, if available).
• Grassi bruciati: Estimates fat burned (requires user input for weight, if available).
• Temperatura: Visualizza la temperatura ambiente.
• Retroilluminazione: Illuminates the display for night riding.

4.3. Utilizzo dei pulsanti

The computer typically features two or three buttons for navigation and setting adjustments. Refer to the specific button labels on your device for precise functions:

• Pulsante MODE: Cycles through different display modes (e.g., speed, distance, time).
• Pulsante SET/RESET: Used to enter settings mode, confirm selections, or reset trip data.
• UP/DOWN Buttons (if present): Adjust values during settings or navigate menus.

Press and hold the SET/RESET button to enter settings mode or to reset trip data. A short press typically confirms a selection or advances to the next display.

5. Impostazioni e calibrazione

Accurate readings depend on proper calibration, especially setting the wheel circumference.

5.1. Impostazione della circonferenza della ruota

The wheel circumference tells the computer how far the wheel travels in one rotation. This is crucial for accurate speed and distance measurements.

1. Consult your bicycle tire's sidewall for its size (e.g., 700x23c, 26x1.95).
2. Refer to a wheel circumference chart (often found online or in a more detailed manual) to find the corresponding circumference in millimeters (mm).
3. Enter the settings mode on your computer (usually by pressing and holding the SET button).
4. Navigate to the wheel circumference setting and input the correct value using the appropriate buttons.
5. Confirm the setting and exit the settings mode.

Mancia: For maximum accuracy, measure your wheel's actual circumference by marking a spot on the tire and the ground, rolling the bike one full revolution, and measuring the distance on the ground.

5.2. Unit Selection (Miles/Kilometers)

In the settings mode, you can also select your preferred unit of measurement for distance and speed (kilometers per hour (km/h) or miles per hour (mph)).

6. Manutenzione

Proper maintenance ensures the longevity and accuracy of your bike computer.

• Pulizia: Pulisci l'unità computer e il sensore con un panno morbido eamp panno. Evitare detergenti abrasivi o solventi.
• Sostituzione della batteria: Replace batteries in both the computer unit and sensor when the display becomes dim or readings become inconsistent. Ensure correct battery type (e.g., CR2032) and polarity.
• Sensor/Magnet Alignment: Periodically check that the sensor and magnet remain properly aligned (within 5mm gap) and securely fastened.
• Resistenza all'acqua: The device has an IP54 rating, meaning it is protected from dust and splashing water. Avoid submerging the unit in water or exposing it to heavy rain for extended periods.

7. Risoluzione Dei Problemi

If you encounter issues with your bike computer, try the following solutions:

8. Specifiche

• Modello: SW569
• Funzioni: 13 (Speed, Distance, Time, Odometer, etc.)
• Tipo di visualizzazione: LCD
• Tipo di sensore: Sensore di velocità senza fili
• Tipo di montaggio: Supporto manubrio
• Interfaccia umana: Pulsanti
• Resistenza all'acqua: IP54 (protetto da polvere e spruzzi d'acqua)
• Fonte di energia: Coin-cell batteries (e.g., CR2032) for computer and sensor

9. Garanzia e supporto

Schwinn products are designed for quality and durability. For specific warranty information, please refer to the warranty card included with your purchase or visit the official Schwinn websito.

For technical support, troubleshooting assistance beyond this manual, or to inquire about replacement parts, please contact Schwinn customer service. Contact details can typically be found on the product packaging or the official brand websito.