Eaton TR1107W Tamper Resistant Decorator Duplex Receptacle Instruction Manual

1. Introduzione e oltreview

The Eaton TR1107W Tamper Resistant Decorator Duplex Receptacle is designed to provide safe and reliable electrical connections in residential and commercial environments. This receptacle complies with the 2011 National Electrical Code (NEC) Article 406.12, which mandates tamper-resistant receptacles in dwelling units to enhance safety, particularly for children.

Le caratteristiche principali includono:

• Tampdesign resistente agli urti per una maggiore sicurezza.
• Durable, impact-resistant thermoplastic face and back body.
• Decorator style for modern aesthetics.
• Easy installation with backed-out terminal screws and built-in wire stripper.

2. Informazioni sulla sicurezza

AVVERTIMENTO: Risk of electric shock or electrocution. Improper installation can result in serious injury or death. Always turn off power at the circuit breaker or fuse box before installing or servicing this device. If you are unsure about any part of these instructions, consult a qualified electrician.

• Prima di lavorare sui cavi elettrici, scollegare sempre l'alimentazione dal pannello di servizio principale.
• Utilizzare dispositivi di protezione individuale (DPI) adeguati, come guanti isolanti e occhiali di sicurezza.
• Assicurarsi che tutti i collegamenti dei cavi siano sicuri e adeguatamente isolati.
• Non superare i valori elettrici nominali specificati per il dispositivo.
• Questo dispositivo è destinato esclusivamente all'uso in ambienti interni.
• Comply with all local and national electrical codes.

3. Contenuto della confezione

The package contains one (1) Eaton TR1107W Tamper Resistant Decorator Duplex Receptacle.

4. Installazione

Follow these steps for proper installation of your Eaton TR1107W receptacle:

1. Spegnimento dell'alimentazione: Locate the circuit breaker or fuse that controls the power to the outlet where you will be installing the receptacle. Turn it OFF. Verify power is off using a voltagetester.
2. Rimuovere la vecchia presa (se applicabile): Carefully remove the wallplate and unscrew the old receptacle from the electrical box. Disconnect the wires, noting which wire was connected to which terminal.
3. Preparare i cavi: Strip approximately 1/2 inch (12.7 mm) of insulation from the ends of the circuit wires. The receptacle features a built-in wire stripper for No.14 and No.12 wire to assist with this step.
4. Collegare i fili: The Eaton TR1107W receptacle supports side-wire connections and accepts up to No.10 solid wire. Terminal screws are backed out and ready for wiring.
   • Collegare il filo di terra in rame verde o nudo to the green grounding screw.
   • Collegare il filo bianco (neutro) to the silver-colored terminal screws.
   • Collegare il filo nero (caldo) to the brass-colored terminal screws.
   Assicurarsi che tutti i collegamenti siano ben saldi e sicuri.
5. Presa di montaggio: Carefully fold the wires into the electrical box. Insert the receptacle into the box and secure it with the mounting screws provided. The extra long and extra wide mounting straps aid in stable installation.
6. Installare la piastra a muro: Attach a compatible decorator wallplate (not included) over the receptacle.
7. Ripristina alimentazione: Turn the power back ON at the circuit breaker or fuse box. Test the receptacle to ensure proper operation.

Figura 1: Fronte view of the Eaton TR1107W Tamper Resistant Decorator Duplex Receptacle. This image highlights the decorator style and the two tampprese resistenti agli urti.

5. Funzionamento

The Eaton TR1107W is a tamper-resistant receptacle. This means it has an internal shutter mechanism that prevents foreign objects from being inserted into the slots. To insert a plug, apply even pressure to both prongs simultaneously. This will open the shutters and allow the plug to enter. If a plug does not insert easily, ensure both prongs are aligned and apply firm, even pressure.

6. Manutenzione

The Eaton TR1107W receptacle requires minimal maintenance. Periodically inspect the receptacle and wallplate for any signs of damage, such as cracks, discoloration, or loose connections. If any damage is observed, turn off power at the circuit breaker and replace the device immediately. Clean the surface with a soft, damp panno; evitare detergenti abrasivi o solventi.

7. Risoluzione Dei Problemi

• No Power at Receptacle:
  • Check the circuit breaker or fuse for the circuit. Reset the breaker or replace the fuse if tripped/blown.
  • Ensure all wire connections to the receptacle are secure. Turn off power before checking connections.
  • Test the receptacle with a known working appliance.
• Spina difficile da inserire:
  • This is normal for tamper-resistant receptacles. Ensure both prongs of the plug are aligned and apply firm, even pressure simultaneously.
  • Do not force the plug, as this can damage the receptacle or the plug.
• Receptacle is Hot to the Touch:
  • Immediately disconnect power to the circuit. This could indicate an overload or a faulty connection. Consult a qualified electrician.

8. Specifiche

9. Garanzia e supporto

For warranty information and technical support, please contact Eaton customer service directly. Refer to the official Eaton websito o sulla confezione del prodotto per i dettagli di contatto e i termini di garanzia più aggiornati.

Mangiare Websito: www.eaton.com