Taylor 5599 Body Fat-Body Water Scale Instruction Manual

Introduzione

This manual provides detailed instructions for the proper use and care of your Taylor 5599 Body Fat-Body Water Scale. This scale is designed to estimate body fat and body water percentages using Bioelectrical Impedance Analysis (BIA), in addition to providing accurate weight measurements. Please read this manual thoroughly before first use to ensure optimal performance and longevity of your device.

Immagine: Superiore view of the Taylor 5599 Body Fat-Body Water Scale. The scale features a clear tempered glass platform with four brushed stainless steel electrode pads and a digital display at the top. The display shows "BODY FAT ANALYZER" and control buttons above it.

Caratteristiche principali

• Utilizes Bioelectrical Impedance Analysis (BIA) to estimate body fat and body water percentages.
• Features a contemporary tempered glass platform with brushed stainless steel accents.
• Large 1.8-inch dual-line LCD display for clear readings.
• High capacity of 440 pounds (200 kg), measuring in precise 0.2 lb (0.1 kg) increments.
• Includes 4 user memory profiles per il monitoraggio personalizzato.
• Athlete mode for enhanced accuracy for active individuals.
• Weight-only mode for simple weight measurement.
• Low/Normal/Moderate/High status bar for body fat and body water percentages.

Configurazione e utilizzo iniziale

1. Installazione della batteria

Your scale comes with one long-life Lithium battery. Before first use, ensure the battery is correctly installed. Open the battery compartment on the underside of the scale and insert the battery, observing the polarity indicators (+/-).

2. Posizionamento della scala

Place the scale on a hard, flat surface. Avoid carpets or uneven flooring, as this can affect accuracy. Ensure the scale is stable before stepping on it.

3. Unit Selection (Pound/Kilogram)

Locate the unit switch (usually on the underside of the scale or near the battery compartment). Select your preferred unit of measurement: pounds (lb) or kilograms (kg).

4. Impostazione utente Profiles

La bilancia può memorizzare i dati di un massimo di 4 utenti. Per impostare un professionistafile:

1. Premere il tasto ON button to activate the scale.
2. Premere il tasto IMPOSTATO button. The user number (P1-P4) will flash. Use the ▲ or ▼ buttons to select a user number, then press IMPOSTATO.
3. The gender icon will flash. Select male or female using ▲ or ▼, quindi premere IMPOSTATO.
4. The height will flash. Adjust your height using ▲ or ▼, quindi premere IMPOSTATO.
5. The age will flash. Adjust your age using ▲ or ▼, quindi premere IMPOSTATO.
6. The athlete mode icon will flash. Select ON or SPENTO utilizzando ▲ or ▼, quindi premere IMPOSTATO per confermare. Athlete mode is recommended for individuals who engage in intense physical activity for at least 10 hours per week and have a resting heart rate of 60 beats per minute or less.
7. The scale will display "0.0" and is ready for use.

Immagine: Un primo piano view of the digital display and control buttons of the Taylor 5599 scale. The display shows "BODY FAT ANALYZER" and a reading of "18.0%". Buttons labeled "ON", "SET", and arrow keys are visible above the display.

Istruzioni per l'uso

1. Weight-Only Measurement

To measure only your weight:

1. Gently tap the center of the scale with your foot to activate it. The display will show "0.0".
2. Quando appare "0.0", salire sulla bilancia a piedi nudi, rimanendo fermi e centrati.
3. Verrà visualizzato il tuo peso. La bilancia si spegnerà automaticamente dopo alcuni secondi.

2. Body Fat and Body Water Measurement

For body composition analysis, ensure your user profile is set up (as described in Setup, Section 4).

1. Premere il tasto ON pulsante.
2. Utilizzare il ▲ or ▼ buttons to select your user number (P1-P4), then wait for "0.0" to appear.
3. Step onto the scale with bare feet, ensuring your feet are positioned on the stainless steel electrode pads. Stand still and centered.
4. La bilancia mostrerà prima il tuo peso, poi scorrerà la percentuale di grasso corporeotage and body water percentage. The Low/Normal/Moderate/High status bar will indicate your body composition category.
5. La bilancia si spegnerà automaticamente dopo aver visualizzato tutte le misurazioni.

Importante: For accurate body composition readings, always use the scale with bare, dry feet. Readings may vary if feet are wet or if socks/shoes are worn.

Immagine: Un primo piano view of one of the brushed stainless steel electrode pads on the Taylor 5599 scale's tempered glass platform. These pads are essential for body fat and body water measurements.

Cura e manutenzione

• Pulisci la bilancia con adamp panno e detergente delicato. Non utilizzare detergenti abrasivi e non immergere la bilancia in acqua.
• Avoid dropping the scale or subjecting it to strong impacts, as this can damage the tempered glass and internal components.
• Conservare la bilancia in un luogo asciutto a temperatura ambiente.
• If the scale will not be used for an extended period, it is recommended to remove the battery.

Immagine: Lato view of the Taylor 5599 scale, highlighting the thickness of the tempered glass platform and the sleek design of its base. This view emphasizes the durable construction.

Risoluzione dei problemi

"Lo" or "Err" displayed:

This usually indicates a low battery. Replace the Lithium battery with a new one. Ensure the battery is inserted with correct polarity.

Letture imprecise:

• Assicurarsi che la bilancia sia posizionata su una superficie dura, piana e livellata.
• Make sure your feet are bare, clean, and dry when taking body composition measurements.
• Rimani fermo e centrato sulla bilancia.
• Avoid moving the scale frequently. If moved, allow it to calibrate by tapping it once and letting it return to "0.0" before use.

Nessuna visualizzazione:

Check if the battery is correctly installed and not depleted. Replace if necessary.

Specifiche

Informazioni sulla garanzia

The Taylor 5599 Body Fat-Body Water Scale comes with a Five-Year Parts and Labor Warranty. This warranty covers defects in materials and workmanship under normal use. It does not cover batteries or damage resulting from misuse, accident, or unauthorized modifications. Please retain your purchase receipt as proof of purchase for warranty claims.

Assistenza clienti

For further assistance, technical support, or warranty inquiries, please contact Taylor Precision Products customer service. Refer to the product packaging or the manufacturer's official websito per le informazioni di contatto più aggiornate.