1. Introduzione
This manual provides essential information for the safe and effective use of your Eiko DT50/35/RS 50W 2G11 Compact Fluorescent Halogen Bulb. Please read these instructions carefully before installation and retain for future reference.
The Eiko DT50/35/RS is a 50-watt compact fluorescent (CFL) bulb, also referred to as a compact fluorescent halogen bulb, featuring a Duo-Tube design and a 2G11 base. It produces a 3500K cool white light with 4300 lumens brightness, suitable for various lighting applications.
Figure 1: Eiko DT50/35/RS 50W 2G11 Compact Fluorescent Halogen Bulb. This image shows the elongated, dual-tube design of the bulb with its 2G11 base at the bottom.
2. Istruzioni di sicurezza
WARNING: To prevent electric shock or burns, always turn off the power supply before installing or replacing the bulb.
- Assicurarsi che l'apparecchio sia dimensionato per la potenza della lampadinatage(50W).
- Non utilizzare con dimmer, a meno che non sia espressamente indicato come compatibile.
- Handle the bulb by its base to avoid touching the glass, as oils from skin can reduce bulb life.
- If the bulb breaks, ventilate the room and carefully clean up the broken glass and mercury according to local regulations.
- Tenere fuori dalla portata dei bambini.
3. Configurazione e installazione
- Spegni l'alimentazione: Locate the light fixture's power switch and turn it off. For added safety, turn off the circuit breaker controlling the fixture.
- Rimuovere la vecchia lampadina (se applicabile): If replacing an existing bulb, allow it to cool completely before carefully removing it from the fixture.
- Identify Base Type: Confirm your fixture uses a 2G11 base. The Eiko DT50/35/RS bulb has a 2G11 4-pin base.
- Installare una nuova lampadina: Align the four pins of the Eiko DT50/35/RS bulb with the corresponding slots in the fixture's 2G11 socket. Gently push the bulb straight into the socket until it is firmly seated. Do not force the bulb.
- Ripristina alimentazione: Once the bulb is securely installed, turn the circuit breaker back on, then turn on the light switch.
Figure 2: Diagram of a 2G11 base. This illustration shows the four-pin configuration of the 2G11 lamp base, indicating its shape and pin arrangement for proper insertion.
4. Istruzioni per l'uso
The Eiko DT50/35/RS bulb operates like a standard fluorescent lamp. Once installed in a compatible fixture and power is supplied, it will illuminate when the fixture's switch is turned on.
- Riscaldamento iniziale: Fluorescent bulbs may take a few moments to reach full brightness, especially in colder environments.
- Accensione/Spegnimento: Frequent switching on and off can reduce the lifespan of fluorescent bulbs. It is recommended to leave the light on for longer periods when possible.
5. Manutenzione
- Pulizia: Ensure the power is off and the bulb is cool before cleaning. Gently wipe the bulb with a soft, dry, lint-free cloth. Do not use liquid cleaners or abrasive materials.
- Sostituzione: Replace the bulb when it reaches the end of its life (flickering, dimming, or failure to light). Always turn off the power before replacing.
- Disposizione: This compact fluorescent bulb contains a small amount of mercury. Dispose of it according to local, state, and federal regulations. Many retailers and municipalities offer recycling programs for CFLs. Do not dispose of in regular household trash.
6. Risoluzione Dei Problemi
| Problema | Possibile causa | Soluzione |
|---|---|---|
| La lampadina non si accende. | Nessuna alimentazione al dispositivo. Lampadina non posizionata correttamente. La lampadina è difettosa o ha raggiunto la fine del suo ciclo di vita. Fixture ballast is faulty. | Controllare l'interruttore di alimentazione e l'interruttore automatico. Spegnere l'alimentazione e riposizionare saldamente la lampadina. Sostituire la lampadina. Consultare un elettricista qualificato. |
| La lampadina sfarfalla. | Lampadina prossima alla fine del suo ciclo di vita. Dimmer incompatibile. Collegamento allentato. Ambiente freddo. | Sostituire la lampadina. Remove dimmer or replace with compatible bulb/fixture. Turn off power, check bulb seating. Allow time for warm-up. |
| La lampadina è fioca. | Lampadina prossima alla fine del suo ciclo di vita. Cosa non correttotage for fixture. | Sostituire la lampadina. Ensure fixture and bulb wattage partita. |
7. Specifiche
| Caratteristica | Dettaglio |
|---|---|
| Marca | Eiko |
| Numero di modello | DT50/35/RS |
| Tipo di luce | Compact Fluorescent Halogen (CFL) |
| Cosatage | 50 Watt |
| Tipo di base | 2G11 (4 pin) |
| Temperatura del colore | 3500 Kelvin (bianco freddo) |
| Luminosità | 4300 lumen |
| Forma | T4 (Duo-Tube) |
| Dimensioni | Circa 1 x 1 x 2.7 pollici |
| Peso dell'articolo | 3.2 once |
| Materiale | Tungsteno |
8. Garanzia e supporto
Specific warranty information for Eiko products may vary. Please refer to the original product packaging or the official Eiko websito per i dettagli più aggiornati sulla garanzia.
For technical support or further inquiries, please contact Eiko customer service through their official channels. Contact information can typically be found on the manufacturer's websito o confezione del prodotto.
Produttore: Eiko
Numero parte: DT50/35/RS
Codice UPC: 031293493040