Introduzione
Thank you for choosing the Amisco Rocky Panel Bed. This manual provides essential information for the safe assembly, proper use, and maintenance of your new bed. Please read all instructions carefully before beginning assembly and retain this manual for future reference.
Informazioni sulla sicurezza
- Montare sempre il letto su una superficie morbida e pulita per evitare danni al prodotto o al pavimento.
- Assicurarsi che tutta la ferramenta sia ben serrata prima dell'uso. Controllare periodicamente e serrare nuovamente se necessario.
- Do not allow children to climb on or play with the bed frame during assembly or once assembled.
- Use only the mattress size recommended for your bed frame.
- Durante il montaggio, tenere le parti di piccole dimensioni fuori dalla portata dei bambini.
- Questo prodotto è progettato esclusivamente per uso interno.
Elenco delle parti
Before assembly, verify that all components are present and undamaged. If any parts are missing or damaged, please contact Amisco customer service.
- Testiera
- Pedana
- Sponde laterali (2)
- Slats (Quantity may vary by size)
- Pacchetto hardware (bulloni, rondelle, dadi, chiave a brugola)
Istruzioni per l'installazione e il montaggio
Il montaggio richiede in genere due adulti. Si prega di seguire attentamente questi passaggi:
- Disimballare i componenti: Estrarre con cautela tutti i componenti dall'imballaggio e disporli su una superficie pulita e morbida. Identificare ogni componente utilizzando l'elenco dei componenti.
- Fissare le guide laterali alla testiera: Align the side rails with the pre-drilled holes on the headboard posts. Insert the appropriate bolts and washers, and loosely tighten with the provided Allen key.
- Fissare le guide laterali alla pedana: Repeat the previous step to attach the other end of the side rails to the footboard posts. Ensure the bed frame is square.
- Stringere tutta la bulloneria: Once all four connections are made, fully tighten all bolts using the Allen key. Do not overtighten.
- Installare le doghe: Place the bed slats across the side rails. Depending on the design, they may rest on ledges or attach with screws. Ensure they are evenly spaced and secure.
- Controllo finale: Verify that the bed frame is stable and all connections are secure.

Istruzioni per l'uso (uso)
- Place your mattress directly onto the installed slats. A box spring may not be necessary depending on your mattress type and desired bed height.
- Assicurarsi che il letto sia posizionato su una superficie piana per evitare oscillazioni.
- Evitare di saltare sul letto, poiché ciò potrebbe danneggiare la struttura e le doghe.
Manutenzione
- Pulizia: Pulisci la struttura metallica con un panno morbido eamp panno. Evitare detergenti abrasivi o prodotti chimici aggressivi, poiché possono danneggiare la finitura.
- Controllo hardware: Periodically (every 3-6 months) check all bolts and connections to ensure they remain tight. Re-tighten if necessary to maintain stability and prevent squeaking.
- Cura dell'ambiente: Keep the bed away from direct sunlight and extreme temperature changes to preserve the finish.
Risoluzione dei problemi
- Rumori stridenti:
Soluzione: Check all bolts and connections. Tighten any loose hardware. Ensure slats are properly seated and not rubbing against the frame. Applying a small amount of lubricant (e.g., silicone spray) to contact points between metal parts can also help.
- Il letto sembra instabile/traballante:
Soluzione: Verify that all assembly steps were followed correctly and all hardware is fully tightened. Ensure the bed is on a level floor. If the floor is uneven, use furniture glides or shims under the bed legs to stabilize it.
- Parti danneggiate o mancanti:
Soluzione: Do not attempt to use the bed with damaged or missing parts. Contact Amisco customer service for replacement parts.
Specifiche
| Caratteristica | Dettaglio |
|---|---|
| Marca | Amisco |
| Nome del modello | Rocky Panel Bed |
| Numeri di modello | 12207-54NV, 12207-60NV, 12207-78NV |
| Materiale | North American cold rolled steel with non-toxic powder coating |
| Peso dell'articolo | Approximately 77 pounds (weight may vary by size) |
| Componenti inclusi | Headboard, Footboard, Slats |
| Origine | Prodotto in Canada |
Garanzia e supporto
Amisco products are manufactured to high-quality standards. For specific warranty details, please refer to the warranty card included with your purchase or visit the official Amisco website. If you require assistance with assembly, missing parts, or have any questions regarding your Amisco Rocky Panel Bed, please contact Amisco customer service directly.
Per ulteriori informazioni, è possibile visitare il sito Amisco Store on Amazon.