1. Introduzione
This manual provides essential information for the safe and effective installation, operation, and maintenance of your Philips F48T12/D/HO/ALTO Fluorescent Tube Light Bulb (Model 369843). Please read these instructions carefully before use and retain them for future reference.
The Philips F48T12/D/HO/ALTO is a 60-watt, 48-inch T12 fluorescent tube designed for high output applications. It features a Recessed Double Contact (R17d) base and emits a 6,500K Daylight white light, providing 3400 lumens of brightness. This bulb is engineered for energy efficiency and has an average lifetime of 12,000 hours.
2. Informazioni sulla sicurezza
WARNING: Risk of electric shock. Always turn off power at the circuit breaker or fuse box before installation, removal, or maintenance.
- Ensure the fixture is compatible with T12 fluorescent bulbs and the R17d base type.
- Do not use this bulb with dimmers unless specifically rated for fluorescent dimming systems.
- Handle the bulb carefully. Do not drop or subject it to excessive force.
- If the bulb breaks, ventilate the area and carefully clean up glass fragments and mercury-containing materials according to local regulations. Avoid direct contact with skin.
- Do not operate the bulb in wet locations or where it may be exposed to water.
- Tenere fuori dalla portata dei bambini.
3. Configurazione e installazione
- Spegni l'alimentazione: Before attempting any installation, ensure the power supply to the fixture is completely turned off at the main circuit breaker or fuse box.
- Rimuovere la vecchia lampadina (se applicabile): If replacing an existing bulb, carefully rotate and pull the old fluorescent tube from its sockets. Dispose of the old bulb properly according to local regulations.
- Ispezionare l'apparecchio: Check the fixture's sockets for any damage or corrosion. Ensure they are clean and in good working order.
- Installare una nuova lampadina: Align the Recessed Double Contact (R17d) pins on each end of the Philips F48T12/D/HO/ALTO bulb with the slots in the fixture's sockets. Gently push the bulb into the sockets and rotate it until it is securely seated. Do not force the bulb.
- Ripristina alimentazione: Una volta installata saldamente la lampadina, ripristinare l'alimentazione all'apparecchio tramite l'interruttore automatico o la scatola dei fusibili.
- Test: Accendere l'interruttore della luce per verificarne il corretto funzionamento.
4. Istruzioni per l'uso
The Philips F48T12/D/HO/ALTO fluorescent tube operates like any standard fluorescent light bulb. Once properly installed and power is restored to the fixture, simply use the wall switch or fixture control to turn the light on and off.
- Avvio iniziale: Some fluorescent bulbs may flicker briefly or take a moment to reach full brightness upon initial start-up, especially in colder environments. This is normal.
- Potenza luminosa: The bulb provides 3400 lumens of 6,500K Daylight white light, suitable for areas requiring bright, cool-toned illumination.
5. Manutenzione
Minimal maintenance is required for your Philips fluorescent tube. Regular cleaning and proper disposal are key to ensuring longevity and safety.
- Pulizia: Ensure the power is off before cleaning. Wipe the bulb gently with a soft, dry, or slightly damp panno. Non usare detergenti abrasivi o solventi.
- Sostituzione: The average lifetime of this bulb is 12,000 hours. When the bulb reaches the end of its life, it may flicker, dim, or fail to light. Replace it following the installation instructions in Section 3.
- Disposizione: Fluorescent bulbs contain small amounts of mercury and should not be disposed of in regular household trash. Check with your local waste management authority for proper recycling or disposal options in your area. Many retailers also offer recycling programs for fluorescent bulbs.
6. Risoluzione Dei Problemi
If your Philips F48T12/D/HO/ALTO fluorescent tube is not functioning as expected, consider the following common issues and solutions:
| Problema | Possibile causa | Soluzione |
|---|---|---|
| La lampadina non si accende. | Nessuna alimentazione al dispositivo. Lampadina non posizionata correttamente. Defective bulb or ballast. |
Controllare l'interruttore automatico/il fusibile. Ensure bulb is securely installed (see Section 3). Replace bulb. If problem persists, consult an electrician for ballast inspection. |
| La lampadina tremola o ronza. | Zavorra vecchia o difettosa. Collegamento allentato. Ambiente freddo. |
Consult an electrician to inspect/replace ballast. Assicurarsi che la lampadina sia saldamente inserita. Allow time for bulb to warm up. |
| Emissione luminosa ridotta. | Lampadina prossima alla fine del suo ciclo di vita. Dirty bulb. |
Sostituire la lampadina. Clean bulb (see Section 5). |
7. Specifiche
| Marca | Philips |
| Numero di modello | 369843 |
| Tipo di luce | Fluorescente |
| Forma della lampadina Dimensioni | T12 (48 inches) |
| Tipo di base | Recessed Double Contact (R17d) |
| Cosatage | 60 Watt |
| Incandescente Equivalente Wattage | 200 Watt |
| Colore chiaro | Bianco luce del giorno |
| Temperatura del colore | 6500 gradi Celsius |
| Luminosità | 3400 lumen |
| Indice di resa cromatica (CRI) | 79 |
| Vita media | 12,000 ore |
| Caratteristica speciale | Efficienza energetica |
| Tipo di materiale | Rame |
| Codice UPC | 046677369842 |
8. Garanzia e supporto
Philips products are manufactured to high-quality standards. Specific warranty details for your Philips F48T12/D/HO/ALTO Fluorescent Tube Light Bulb are typically provided with the product packaging or can be found on the official Philips lighting websito.
For technical support, warranty claims, or further assistance, please contact Philips customer service. You can usually find contact information on the product packaging or by visiting the official Philips websito: