Logitech Wireless Presenter R400 User Manual

Introduzione

The Logitech Wireless Presenter R400 is designed to enhance your presentations with intuitive controls and a bright red laser pointer. Its 2.4 GHz wireless connectivity allows you to move freely up to 50 feet away from the receiver, providing flexibility and greater impact during your talks. This device offers a smooth and simple way to navigate through your slides with easy-to-find controls.

Figura 1: Fronte view of the Logitech Wireless Presenter R400.

Cosa c'è nella scatola

• R400 Presentation Pointer
• Wireless Mini-Receiver
• 2 batterie AAA
• Custodia per il trasporto
• Guida Rapida

Impostare

1. Installazione della batteria

The R400 requires 2 AAA batteries for operation. To install or replace batteries:

1. Locate the battery compartment on the back of the presenter.
2. Far scorrere per aprire il coperchio della batteria.
3. Inserire 2 batterie AAA, assicurandosi della corretta polarità (+/-).
4. Chiudere bene il coperchio della batteria.

Figure 2: Battery compartment location and other features.

2. Connecting the Wireless Mini-Receiver

The R400 uses a plug-and-play USB receiver. No software installation is required.

1. Remove the wireless mini-receiver from its storage slot at the bottom of the presenter.
2. Plug the mini-receiver into an available USB port on your computer.
3. The presenter should automatically connect to your computer.

Figure 3: Plugging the USB receiver into a computer.

Figure 4: The USB receiver provides up to 50-foot wireless range.

Istruzioni per l'uso

Accensione/spegnimento

Locate the ON/OFF switch on the side of the presenter. Slide it to the 'ON' position to power on the device and to 'OFF' when not in use to conserve battery life.

Figure 5: Manual ON/OFF switch for battery conservation.

Funzioni dei pulsanti

The R400 features intuitive controls for seamless presentation navigation:

• Pulsante puntatore laser: Press and hold to activate the bright red laser pointer. Release to turn off.
• Next Slide (>) Button: Press to advance to the next slide in your presentation.
• Previous Slide (<) Button: Press to go back to the previous slide in your presentation.
• Start Presentation Button: Initiates the slideshow from the current slide.
• Pulsante schermo nero: Toggles the screen black, useful for drawing audience attention back to you. Press again to resume the presentation.

Figura 6: Oltreview of the R400's control buttons.

Figure 7: The bright red laser pointer highlights key points effectively.

Manutenzione

Sostituzione della batteria

When the battery indicator light turns red or the presenter's performance degrades, it's time to replace the batteries. Refer to the "Battery Installation" section under Setup for detailed steps.

Pulizia

Pulire il presentatore con un panno morbido e asciutto. Evitare l'uso di detergenti abrasivi o solventi.

Risoluzione dei problemi

• Il presentatore non risponde:
  • Ensure the mini-receiver is securely plugged into a USB port.
  • Check if the presenter is powered on (ON/OFF switch).
  • Replace the batteries if the battery indicator is low or off.
  • Try plugging the mini-receiver into a different USB port on your computer.
• Il puntatore laser non funziona:
  • Assicurarsi che il presentatore sia acceso.
  • Premere e tenere premuto con decisione il pulsante del puntatore laser.
  • Verify that the surface you are pointing at is suitable for laser projection (some screens or glass surfaces may not show the laser well).
• Portata wireless limitata:
  • Ensure there are no major obstructions (e.g., walls, large metal objects) between the presenter and the receiver.
  • Move closer to the computer if experiencing interference.

Specifiche

Garanzia e supporto

Per informazioni sulla garanzia e supporto tecnico, fare riferimento al sito ufficiale Logitech website or the Quick-Start Guide included in your product packaging.

È possibile scaricare il Manuale utente ufficiale (PDF): Logitech Wireless Presenter R400 User Manual