Westek OMLC163BC Motion-Sensing Light Control User Manual

1. Introduzione

The Westek OMLC163BC Motion-Sensing Light Control automatically activates a light when motion is detected within its sensing range. This device is designed to provide convenient, automatic lighting and enhance security by deterring unwanted intrusion. It is compatible with various bulb types up to 150 Watts.

2. Informazioni sulla sicurezza

AVVERTENZA: Per ridurre il rischio di incendi, scosse elettriche o lesioni, leggere e seguire attentamente tutte le istruzioni.

• Sicurezza elettrica: Always turn off power to the light socket at the circuit breaker before installation, removal, or servicing.
• Compatibilità degli apparecchi: The motion sensor is not designed for use with enclosed or shaded fixtures, or with fixtures that have glass or plastic covers. Use only with ceiling-mounted, bare bulb fixtures.
• Compatibilità della lampadina: Suitable for use with incandescent, compact fluorescent (CFL), or LED bulbs up to 150 Watts. Do not exceed the maximum wattage.
• Altezza di installazione: Suitable for fixtures mounted from 8 to 18 feet high.
• Avvertenza sulla Proposta 65: Questo prodotto contiene sostanze chimiche note allo Stato della California come causa di cancro e malformazioni congenite o altri danni all'apparato riproduttivo.

3 Caratteristiche

The Westek OMLC163BC Motion-Sensing Light Control offers the following features:

• Automatically turns light on when motion is detected.
• Turns off 10 minutes after motion stops.
• 180-degree sensing window with a 20 ft detection zone.
• Compatible with LED, compact fluorescent, halogen, and incandescent bulbs up to 150 Watts.
• Easy screw-in installation.

4. Installazione

Per una corretta installazione, seguire questi passaggi:

1. Spegnere l'alimentazione: Ensure the power to the light socket is turned off at the circuit breaker before beginning installation.
2. Rimuovere la lampadina esistente: Carefully remove any light bulb currently in the socket.
3. Screw in device: Screw the motion-sensing light control device into the empty light socket until it is snug.
4. Install light bulb: Screw your desired light bulb (LED, CFL, halogen, or incandescent up to 150 Watts) into the control device's socket.
5. Adjust sensor: The motion detection sensor can be tilted up or down (up to 20 degrees in either direction) and rotated left or right (up to 90 degrees in either direction) to optimize the detection area.
6. Ripristinare l'alimentazione: Riattivare la corrente tramite l'interruttore automatico.

NOTE: For best performance, the sensor should be oriented below the bulb.

5. Funzionamento

Once installed and powered on, the Westek OMLC163BC Motion-Sensing Light Control operates automatically:

• The light will turn on when motion is detected within its 180-degree, 20-foot detection zone.
• La luce rimarrà accesa finché verrà rilevato un movimento continuo.
• After motion ceases, the light will automatically turn off after approximately 10 minutes.
• The sensor is designed to ignore ambient light, meaning it will activate regardless of existing light conditions.

6. Manutenzione

The Westek OMLC163BC Motion-Sensing Light Control requires minimal maintenance:

• Ensure the sensor lens is kept clean and free from obstructions (e.g., dirt, dust, spiderwebs) to maintain optimal detection performance. Use a soft, dry cloth for cleaning.
• Non utilizzare detergenti o solventi abrasivi sul dispositivo.
• Periodically check the device for any signs of damage or loose connections.

7. Risoluzione Dei Problemi

If you experience issues with your motion-sensing light control, refer to the following:

• La luce non si accende:
  Check power: Ensure the power to the light socket is on at the circuit breaker.
  Check bulb: Verify the light bulb is working and correctly screwed into the device.
  Check sensor alignment: Adjust the sensor's direction to ensure it covers the desired detection area.
  Ostruzioni: Assicurarsi che non vi siano ostacoli che bloccano il sensore view.
• La luce rimane accesa ininterrottamente:
  Continuous motion: Confirm there is no continuous motion within the detection zone (e.g., swaying branches, pets).
  Malfunzionamento del sensore: If no motion is present and the light remains on, the sensor may be faulty.
• Light turns on too frequently or not frequently enough:
  Sensibilità del sensore: This device does not have adjustable sensitivity. Ensure the sensor is aimed correctly to cover only the desired area.
  Fattori ambientali: Extreme temperatures or strong air currents can sometimes affect sensor performance.
• Light turns off too quickly or too slowly:
  Fixed duration: The device has a fixed 10-minute duration after motion stops and does not offer adjustable time settings.

8. Specifiche

9. Informazioni sulla garanzia

AmerTac provides a limited warranty to the original purchaser of this product against defects in material and workmanship for a period of 5 anni from the date of purchase. For detailed warranty information, please visit the manufacturer's websito a www.amertac.com/warranties.

10. Supporto e informazioni di contatto

For technical support or inquiries, please contact AmerTac:

• Indirizzo: 250 Boulder Dr, Breinigsville, PA 18031, USA
• Telefono: Numero di telefono: 610-336-1330
• Websito: www.amertac.com