Tenergy 9.6V NiMH/NiCd RC Battery Charger Instruction Manual

Prodotto finitoview

This manual provides instructions for the Tenergy 9.6V (8S) NiMH/NiCd RC Battery Charger, designed for use with RC hobbies. It features a 400mA AC plug and a standard Tamiya connector. This charger is specifically for 9.6V NiMH/NiCd battery packs and is not compatible with LiPo batteries or other voltage battery types.

Image: The Tenergy 9.6V NiMH/NiCd RC Battery Charger with its standard Tamiya connector.

Istruzioni di sicurezza

• Only use this charger with 9.6V (8S) NiMH or NiCd battery packs. Do not attempt to charge LiPo batteries or any other battery chemistry.
• Questo caricabatterie è non compatibile with Spike the Dinosaur or similar toys requiring specific charging protocols.
• Ensure the battery connector is a standard Tamiya type. Incompatible connectors may cause damage.
• Non lasciare le batterie in carica incustodite.
• Keep the charger and battery away from flammable materials.
• Non esporre il caricabatterie all'umidità o a temperature estreme.
• If the charger or battery shows signs of damage, discontinue use immediately.

Impostare

Before first use, inspect the charger and battery for any visible damage. Ensure the battery pack is a 9.6V NiMH or NiCd type with a standard Tamiya connector.

1. Locate a standard AC power outlet (100-240V).
2. Plug the charger's AC plug into the power outlet. The LED indicator on the charger will illuminate.
3. Connect the standard Tamiya connector from your 9.6V NiMH/NiCd battery pack to the charger's output connector. Ensure a secure connection.

Image: Diagram showing the dimensions of a standard Tamiya connector, emphasizing compatibility. This charger is only compatible with white standard Tamiya connectors, not mini Tamiya connectors.

Image: The Tenergy charger plugged into a power strip, ready to connect to a battery pack.

Istruzioni per l'uso

Caricare la batteria

Once the charger is plugged into an AC outlet and connected to a compatible 9.6V NiMH/NiCd battery pack, the charging process will begin automatically.

• Indicatore LED: The charger features a simple LED indicator to show charging status.
• Rosso pieno: Indica che la batteria è attualmente in carica.
• Verde pieno: Indica che la batteria è completamente carica.

Image: Close-up of the charger showing a red LED for charging and a green LED for fully charged status.

For a 2000mAh battery pack, the estimated charge time from empty is approximately 5-6 hours at a 400mA charging speed. Charging times may vary based on battery capacity and discharge level.

Image: The Tenergy charger connected to a 9.6V 2000mAh NiMH battery pack, illustrating the charging process.

Voltage Compatibilità

This charger is designed for 9.6V (8S) NiMH and NiCd battery packs. Always verify your battery's voltage and chemistry before connecting to prevent damage.

Image: Two different styles of 9.6V (8S) NiMH battery packs, demonstrating the charger's voltage compatibilità.

Manutenzione

• Mantenere il caricabatterie pulito e privo di polvere e detriti. Utilizzare un panno asciutto per la pulizia.
• Conservare il caricabatterie in un luogo fresco e asciutto quando non in uso.
• Avoid wrapping the cable too tightly around the charger to prevent wire damage.

Risoluzione dei problemi

Specifiche

• Numero modello: 01009
• Ingresso volumetage: 100-240V AC
• Volume di uscitatage: 12 Volt
• Corrente di carica: 400mA
• Tipi di batterie compatibili: NiMH, NiCd
• Batteria compatibile Voltage: 9.6V (8 secondi)
• Tipo di connettore: Standard Tamiya
• Peso dell'articolo: 3.21 once (0.2 libbre)
• Dimensioni della confezione: 3.82 x 1.5 x 1.1 pollici
• Certificazione: Conforme CE

Garanzia e supporto

This Tenergy charger includes a Garanzia di 12 mesi from the date of purchase. For warranty claims, technical support, or any questions regarding the product, please contact Tenergy Corporation directly. Refer to the product packaging or the official Tenergy websito per le informazioni di contatto più aggiornate.

Video del prodotto