SAMSON SWAS5LM5

Samson LM5 Lavalier Microphone Instruction Manual

Model: SWAS5LM5

1. Introduzione

The Samson LM5 is a compact, omnidirectional lavalier microphone designed for clear voice reproduction in various applications. It features a 3.5mm miniplug connector, specifically engineered for seamless integration with Samson wireless beltpack transmitters. This manual provides essential information for the proper setup, operation, and maintenance of your LM5 microphone, ensuring optimal performance and longevity.

Componenti inclusi:

  • LM5 Lavalier Microphone
  • Parabrezza in schiuma
  • Clip per microfono

2. Impostazione

2.1 Attaching the Microphone Clip

Secure the included microphone clip to the body of the LM5 lavalier microphone. The clip allows for easy attachment to clothing, such as a lapel or tie, ensuring stable positioning during use.

2.2 Installing the Foam Windscreen

Gently slide the foam windscreen over the microphone capsule. The windscreen helps to reduce plosive sounds (P-popping) and wind noise, improving overall audio clarity.

2.3 Collegamento a un trasmettitore

The LM5 microphone is designed for use SOLTANTO with Samson wireless beltpack transmitters. Insert the 3.5mm miniplug connector firmly into the microphone input jack on your Samson wireless beltpack transmitter. Ensure the connection is secure to prevent signal loss.

Samson LM5 Lavalier Microphone with 3.5mm Miniplug Connector and foam windscreen

Image: The Samson LM5 Lavalier Microphone, shown with its 3.5mm miniplug connector and an attached foam windscreen. This image illustrates the microphone's compact design and its primary components.

3. Istruzioni per l'uso

3.1 Posizionamento del microfono

For optimal sound quality, position the LM5 microphone approximately 6-8 inches (15-20 cm) from the speaker's mouth. Attach it to clothing in a location that minimizes rubbing or contact with other objects, which can cause unwanted noise.

3.2 Accensione

Once connected to your Samson wireless beltpack transmitter, refer to your transmitter's manual for instructions on powering it on and establishing a wireless connection with its receiver.

3.3 Regolazione dei livelli

Adjust the input gain on your Samson wireless beltpack transmitter and the corresponding receiver to achieve appropriate audio levels. Monitor the audio output to prevent clipping or distortion.

4. Manutenzione

4.1 Pulizia

To clean the microphone, gently wipe the exterior with a soft, dry cloth. Do not use liquid cleaners or solvents. The foam windscreen can be carefully removed and cleaned with mild soap and water, then allowed to air dry completely before reattaching.

4.2 Conservazione

When not in use, store the LM5 microphone in a clean, dry place, away from extreme temperatures and humidity. Avoid tightly coiling the cable to prevent damage.

4.3 Cura dei cavi

Handle the microphone cable with care. Avoid sharp bends, kinks, or excessive pulling, which can damage the internal wiring and connector.

5. Risoluzione Dei Problemi

5.1 Nessuna uscita audio

  • Verifica connessione: Ensure the 3.5mm miniplug is fully inserted into the Samson wireless beltpack transmitter.
  • Potenza del trasmettitore: Verify that the wireless beltpack transmitter is powered on and functioning correctly.
  • Collegamento del ricevitore: Confirm the wireless receiver is properly connected and receiving a signal from the transmitter.
  • Compatibilità: Remember the LM5 is designed for Samson wireless beltpack transmitters only.

5.2 Poor Sound Quality / Excessive Noise

  • Posizionamento del microfono: Adjust the microphone's position to be closer to the sound source and away from clothing or jewelry that might cause rubbing noise.
  • Parabrezza: Ensure the foam windscreen is properly installed to reduce plosives and wind noise. Replace if damaged.
  • Livelli di guadagno: Check and adjust the gain settings on your transmitter and receiver to avoid distortion or low signal.
  • Interferenza: If using a wireless system, check for potential wireless interference and adjust channels if necessary (refer to your wireless system's manual).

5.3 Clip Issues

If the microphone clip becomes loose or breaks, it may need to be replaced. Contact Samson support for replacement parts.

6. Specifiche

CaratteristicaSpecificazione
MarcaSANSONE
Nome del modelloSWAS5LM5
Tecnologia di connettivitàWireless (via compatible transmitter)
Tipo di connettoreMinispina da 3.5 mm
Caratteristica specialeClip incluso
Dispositivi compatibiliSamson Wireless Beltpack Transmitters
ColoreNero
Modello polareOmnidirezionale
Fattore di forma del microfonoLavalier (microphone only)
Fonte di alimentazioneCorded Electric (via transmitter)
Signal-to-Noise Ratio78 dB
Materiale di recinzioneAcciaio inossidabile
Peso dell'articolo24.77 grammi
Dimensioni dell'articolo51.57 x 0.2 x 0.2 pollici
ProduttoreTecnologie Sansone

7. Garanzia e supporto

7.1 Informazioni sulla garanzia

The Samson LM5 Lavalier Microphone is covered by a Garanzia di 1 anni su parti e manodopera dalla data di acquisto. La presente garanzia copre i difetti di materiali e fabbricazione in condizioni di normale utilizzo. Si prega di conservare la prova d'acquisto per eventuali reclami in garanzia.

7.2 Assistenza clienti

For technical assistance, troubleshooting, or warranty service, please visit the official Samson Technologies website or contact their customer support department. Contact information can typically be found on the Samson website or in the documentation provided with your wireless beltpack transmitter.

© 2024 Samson Technologies. Tutti i diritti riservati.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.