Rosewill RMS-MA5010 Articulating Full Motion Dual Arm TV Mount User Manual

Introduzione

This manual provides comprehensive instructions for the safe and efficient installation, operation, and maintenance of your Rosewill RMS-MA5010 Articulating Full Motion Dual Arm TV Mount. Please read this manual thoroughly before installation and retain it for future reference.

The Rosewill RMS-MA5010 is designed to securely mount televisions ranging from 37 to 65 inches, with a maximum weight capacity of 132 lbs (60 kg). Its dual-arm design allows for full motion articulation, tilt adjustment, and cable management, providing flexibility and a clean aesthetic.

Informazioni importanti sulla sicurezza

WARNING: Failure to read and follow these instructions may result in serious personal injury, property damage, or voiding of your warranty. If you do not understand these instructions or have doubts about the safety of the installation, contact a qualified installer.

• Assicurarsi che la superficie di montaggio possa sostenere in modo sicuro il peso combinato del supporto e del televisore.
• Non superare la capacità di peso massima di 132 libbre (60 kg).
• Always use two people for installation to prevent injury or damage.
• Verify that all components are present and undamaged before installation. Do not use damaged parts.
• Stringere saldamente tutte le viti, ma non eccessivamente. Un serraggio eccessivo può danneggiare i componenti.
• Questo prodotto è destinato esclusivamente all'uso in ambienti interni.

Contenuto della confezione

Please verify that all parts are included in your package before beginning installation.

Figura 1: Sopraview of the Rosewill RMS-MA5010 TV mount, mounting arms, hardware kit, and a small level, alongside its retail packaging.

Il contenuto tipico della confezione include:

• Wall Plate Assembly (main mount body)
• TV Bracket Arms (2 pieces)
• Hardware Kit (various screws, washers, spacers, lag bolts)
• Small Bubble Level

Configurazione e installazione

Strumenti necessari (non inclusi)

• Trova stud
• Forare con punte adatte (legno/cemento)
• Chiave a bussola o chiave regolabile
• Cacciavite con testa Phillips
• Matita
• Nastro di misurazione

Passaggio 1: determinare la posizione di montaggio

Identify the desired location for your TV. Use a stud finder to locate the center of at least two adjacent wooden studs in the wall. Mark these locations with a pencil. For concrete or brick walls, consult a professional for appropriate anchors and drilling techniques.

Passaggio 2: attaccare la piastra a parete alla parete

1. Hold the wall plate assembly against the wall, aligning the mounting holes with the marked stud centers. Ensure the mount is level using the provided bubble level or a longer spirit level.
2. Segnare i punti di foratura attraverso i fori della piastra a muro.
3. Drill pilot holes into the studs. The size of the drill bit will depend on the lag bolts provided in your hardware kit. Refer to the hardware kit instructions for specific drill bit sizes.
4. Secure the wall plate to the wall using the lag bolts and washers. Tighten firmly with a socket wrench until snug, but do not overtighten.

Figura 2: Davanti view of the Rosewill RMS-MA5010 mount, showing the wall plate, articulating arms, and TV bracket attachment points.

Fase 3: Fissare le staffe TV al televisore

1. Carefully place your television face down on a soft, clean surface to prevent screen damage.
2. Identifica i fori di montaggio VESA sul retro del televisore.
3. Select the appropriate screws, washers, and spacers from the hardware kit that fit your TV's VESA pattern. Refer to your TV's manual for recommended screw sizes.
4. Attach the two TV bracket arms to the back of your television. Ensure the hooks on the bracket arms are facing upwards and the arms are centered horizontally on the TV.
5. Stringere saldamente le viti, ma non eccessivamente.

Figura 3: Posteriore view of the Rosewill RMS-MA5010 mount, showing the articulating mechanism and the VESA mounting plate where the TV brackets attach.

Step 4: Hang Television on Wall Plate

WARNING: This step requires at least two people to prevent injury or damage to the TV.

1. Con l'aiuto di qualcuno, sollevare con cautela il televisore utilizzando le staffe in dotazione.
2. Hook the TV bracket arms onto the horizontal bars of the wall plate assembly. Ensure both arms are securely seated.
3. Once the TV is hanging, engage any safety locking mechanisms on the TV bracket arms to prevent accidental dislodgement. (Note: Product description mentions "TV lockable device available (lock not included)").

Istruzioni per l'uso

Adjusting Articulation and Extension

The dual-arm design allows the TV to be extended from the wall and articulated left or right. Gently grasp the sides of the television and move it to the desired position. The arms are designed to hold their position once set.

Figura 4: Lato view of the Rosewill RMS-MA5010 mount, illustrating the articulating arm mechanism and tilt adjustment knob.

Regolazione dell'inclinazione

The mount offers a tilt range of up to 15 degrees. To adjust the tilt, locate the tilt adjustment knobs on the side of the TV bracket arms (refer to Figure 4). Loosen the knobs slightly, tilt the TV to the desired angle, and then re-tighten the knobs firmly to secure the position.

Gestione dei cavi

The mount features integrated cable management to help organize and conceal cables. Route your TV and power cables through the designated channels or clips on the articulating arms to maintain a clean and organized appearance.

Manutenzione

• Ispezione regolare: Controllare periodicamente tutte le viti e i bulloni per assicurarsi che siano ben serrati. Serrare nuovamente se necessario, ma senza esagerare.
• Pulizia: Pulisci la montatura con un panno morbido e asciutto. Evita detergenti abrasivi o solventi che potrebbero danneggiare la finitura.
• Lubrificazione: The articulating joints are designed for smooth operation. If movement becomes stiff, a small amount of silicone-based lubricant can be applied to the pivot points, avoiding contact with electrical components.

Risoluzione dei problemi

TV Sags or Does Not Hold Position

• Check Weight: Ensure the TV's weight does not exceed the mount's maximum capacity of 132 lbs (60 kg).
• Stringere i giunti: The articulating joints may require tightening. Locate the adjustment bolts on the arms and tighten them slightly. Do not overtighten, as this can restrict movement.
• Wall Plate Security: Verify that the lag bolts securing the wall plate to the wall studs are firmly tightened.

Difficulty Moving TV

• Loosen Joints: If the articulating arms are too stiff, the adjustment bolts on the joints may be overtightened. Loosen them a quarter turn at a time until movement is smooth but still holds position.
• Lubrificazione: Apply a small amount of silicone-based lubricant to the pivot points if stiffness persists.

TV non in piano

• Wall Plate Level: Recheck the level of the wall plate. If it was installed unlevel, the TV will also be unlevel. This may require re-installation.
• Regolazione del supporto TV: Some mounts offer post-installation leveling adjustments on the TV brackets. Consult the specific design of your TV brackets for this feature.

Specifiche

Informazioni sulla garanzia

Specific warranty details for the Rosewill RMS-MA5010 TV Mount are not provided in this manual. Please refer to the product packaging, the official Rosewill websito o presso il punto vendita per i termini e le condizioni di garanzia dettagliati.

Assistenza clienti

For technical assistance, missing parts, or further inquiries regarding your Rosewill RMS-MA5010 TV Mount, please contact Rosewill customer support. Contact information can typically be found on the official Rosewill websito o sulla confezione del prodotto.