Orbit 62061Z 1-Outlet Programmable Digital Hose Watering Timer

Introduzione

The Orbit 62061Z 1-Outlet Programmable Digital Hose Watering Timer is designed to automate your watering schedule, providing convenience and water conservation. This manual will guide you through the installation, programming, and maintenance of your new watering timer.

Figure 1: Orbit 62061Z 1-Outlet Programmable Digital Hose Watering Timer.

Impostare

Setting up your Orbit watering timer is a straightforward process that requires no special tools. Follow these steps for proper installation:

1. Installazione della batteria: Locate the battery compartment on the back of the timer. Insert two (2) 1.5V AAA alkaline batteries, ensuring correct polarity. The timer retains its program even when batteries are changed.
2. Collega al rubinetto: Connect the timer to your outdoor hose faucet. The swivel coupling allows for quick and secure attachment without twisting the timer body. Ensure the connection is hand-tight to prevent leaks.
3. Collegare il tubo: Collegare il tubo da giardino all'uscita situata nella parte inferiore del timer.

Figure 2: Attaching the timer to a hose faucet.

Figure 3: The swivel coupling for easy attachment.

Istruzioni per l'uso

The Orbit timer features an easy-to-use dial and a large digital display for simple programming. The dial cycles through various settings, allowing you to customize your watering schedule.

Passaggi di programmazione:

1. Imposta l'orologio: Turn the dial to 'SET CLOCK'. Use the '+' and '-' buttons to set the current time.
2. Ora di inizio: Turn the dial to 'START TIME'. Use the '+' and '-' buttons to select when you want watering to begin.
3. Per quanto: Turn the dial to 'HOW LONG'. Use the '+' and '-' buttons to set the duration of each watering cycle (from 1 to 240 minutes).
4. Quante volte: Turn the dial to 'HOW OFTEN'. Use the '+' and '-' buttons to set the frequency of watering (e.g., every 6 hours, 12 hours, or from once a day up to once every 7 days).
5. Run Program (Auto): Turn the dial to 'AUTO'. The timer will now run according to your programmed schedule.

Figure 4: The large digital display and intuitive dial for easy programming.

Figure 5: Water frequencies can be set from every 6 hours to once every 7 days.

Figure 6: Set watering duration from 1 to 240 minutes.

Funzione di ritardo pioggia:

To conserve water during rainy periods, you can activate the rain delay feature. While the dial is set to 'AUTO', press the '+' button. This will pause your watering schedule for 24, 48, or 72 hours. The timer will automatically resume the program after the selected delay period.

Figure 7: Activating the rain delay feature.

Irrigazione manuale:

To water manually without interrupting your programmed schedule, press the 'MANUAL' button. You can then use the '+' and '-' buttons to set a manual watering duration. The timer will revert to its programmed schedule once the manual watering is complete.

Prodotto finitoview Video:

Video 1: Un overview of the Orbit Hose Faucet Timer's features and operation.

Manutenzione

To ensure the longevity and optimal performance of your Orbit watering timer, follow these maintenance guidelines:

• Sostituzione della batteria: Replace batteries annually or when the low battery indicator appears on the display. Always use new 1.5V AAA alkaline batteries.
• Considerazioni sulla temperatura: The timer is designed for outdoor use but should be protected from extreme temperatures. Do not operate at temperatures exceeding 120°F (49°C) or below 32°F (0°C).
• Rimessaggio invernale: Before the first frost, remove the timer from the faucet, remove the batteries, and store it indoors in a location where temperatures remain above 32°F (0°C). Freezing temperatures can cause damage to the internal components.
• Pulizia: Periodically check the filter washer located in the timer's inlet for debris. Clean if necessary to maintain proper water flow.

Figure 8: Back of the timer with battery information and temperature warnings.

Risoluzione dei problemi

If you encounter issues with your Orbit watering timer, refer to the following common problems and solutions:

Specifiche

• Numero modello: AZ62061
• Colore: Verde
• Materiale: Plastica
• Dimensioni del prodotto: 5"P x 3"L x 5"A
• Peso dell'articolo: 0.01 once
• Numero di impostazioni: 7
• Dimensioni dello schermo: 2 pollici
• Batterie richieste: Sì (2 x AAA)
• Pressione massima di esercizio: 100 bar
• Intervallo di temperatura di esercizio: 0°C - 49°C ​​(32°F - 120°F)
• Paese di origine: Cina
• Codice UPC: 046878912137, 046878620612

Garanzia e supporto

The Orbit 62061Z 1-Outlet Programmable Digital Hose Watering Timer comes with a Garanzia sulle parti di 6 anniLa presente garanzia copre i difetti di materiali e di fabbricazione in normali condizioni di utilizzo.

For technical support, warranty claims, or additional information, please visit the official Orbit webo contattare il servizio clienti. Conservare la ricevuta d'acquisto come prova d'acquisto ai fini della garanzia.

Per informazioni più dettagliate, puoi anche fare riferimento alla Guida utente ufficiale in formato PDF: Scarica la Guida per l'utente (PDF)