Philips SRP5107/27 Universal Remote Control Instruction Manual

Introduzione

The Philips SRP5107/27 Universal Remote Control is designed to consolidate control of up to seven audio/video devices into a single unit. This remote offers advanced functionality for DVR and HD devices, along with a learning capability to adapt to various equipment. Its primary buttons feature LED backlighting for improved visibility in low-light conditions.

Le caratteristiche principali includono:

• Consolidates control for up to 7 AV devices.
• Compatible with devices manufactured since 1990.
• Specifically designed for use with DVR/HD devices.
• LED illumination on primary keys for ease of use.
• Integrated learning keys for future device compatibility.
• Memorizes setup codes even after battery changes.

Impostare

1. Installazione della batteria

The Philips SRP5107/27 remote requires two AA batteries. Ensure correct polarity when inserting the batteries. The remote is designed to retain programmed codes even when batteries are removed or replaced.

2. Device Programming (Code Search Method)

To program the remote for your devices using the code search method:

1. Accendi il dispositivo che desideri controllare (ad esempio, TV, lettore DVD).
2. Press and hold the desired device button on the remote (e.g., TV, DVD, AUSILIARIO).
3. Tenendo premuto il pulsante del dispositivo, premere e tenere premuto il pulsante Energia button. The device button will illuminate.
4. Release both buttons. The device button will remain illuminated.
5. Puntare il telecomando verso il dispositivo e premere ripetutamente il tasto Energia pulsante (o Canale su button) until the device turns off. This indicates the remote has found a compatible code.
6. Una volta spento il dispositivo, premere immediatamente il tasto Entrare button to save the code. The device button light will turn off.
7. Test other functions (e.g., volume, channel) to ensure full compatibility. If not all functions work, repeat the process to find an alternative code.

3. Funzione di apprendimento

The learning function allows the universal remote to learn commands directly from your original device remote. This is useful for commands not covered by pre-programmed codes or for devices not listed in the code database.

1. Place the Philips universal remote and your original remote on a flat surface, facing each other, with their IR emitters aligned and about 1-2 inches apart.
2. Premere e tenere premuto il tasto Impostare button on the universal remote until the device button (e.g., TV) si illumina.
3. Premere il pulsante del dispositivo che si desidera programmare (ad esempio, TV). The device button will flash.
4. Press the button on the universal remote that you want to teach a function to (e.g., Alza il volume). The device button will now flash rapidly.
5. Press and hold the corresponding button on your original remote (e.g., Alza il volume) until the device button on the universal remote flashes twice and then stays solid. This indicates successful learning.
6. Repeat steps 4 and 5 for any other buttons you wish to teach.
7. Premere il tasto Impostare nuovamente il pulsante per uscire dalla modalità di apprendimento.

Nota: The remote has a finite limit on the number of custom buttons that can be learned. If you have multiple devices without control codes, the device may run out of memory for new learned commands.

Utilizzo del telecomando

1. Selezione del dispositivo

Per controllare un dispositivo specifico, premere il pulsante del dispositivo corrispondente nella parte superiore del telecomando (ad esempio, TV, DVD, SAB, AUSILIARIO). The selected device button will illuminate, indicating it is active.

2. Funzioni di base

Once a device is selected, use the corresponding buttons for common functions:

• Energia: Accende o spegne il dispositivo selezionato.
• Volume su/giù: Regola il volume del dispositivo selezionato.
• Canale su/giù: Cambia canale sul dispositivo selezionato.
• Tastierino numerico: Inserisce i numeri dei canali o altri input numerici.
• Disattiva audio: Disattiva l'audio.

3. Punch-Through Volume

The remote may feature a punch-through volume function, allowing volume control of a primary audio device (e.g., TV or audio receiver) regardless of the currently selected device mode. If this function does not operate as desired, you may need to use the learning function to remap the volume buttons for specific modes to your preferred audio device.

Manutenzione

1. Sostituzione della batteria

When the remote's performance degrades or the LED indicators dim, it is time to replace the batteries. Open the battery compartment on the back of the remote and replace the two AA batteries with new ones, ensuring correct polarity. The remote is designed to retain all programmed settings during battery replacement.

2. Pulizia

To clean the remote, use a soft, slightly damp cloth. Do not use abrasive cleaners or solvents, as these can damage the remote's finish or internal components. Ensure no liquid enters the remote's casing.

Risoluzione dei problemi

• Remote does not control device:
  • Assicurarsi che il telecomando sia puntato direttamente verso il dispositivo e che non vi siano ostacoli.
  • Verify that the correct device mode button (e.g., TV, DVD) is selected.
  • Re-attempt the device programming steps to ensure the correct code is entered. Try alternative codes for the same brand if available.
  • Check if the batteries are fresh and correctly installed.
• Alcuni pulsanti non funzionano dopo la programmazione:
  • This may indicate that the selected code is not fully compatible with your device. Try repeating the programming process to find a more compatible code.
  • Use the learning function to teach specific non-working buttons from your original remote.
• Funzione di apprendimento non funzionante:
  • Assicurarsi che le batterie del telecomando originale siano nuove.
  • Verify that the IR emitters of both remotes are properly aligned and close enough (1-2 inches).
  • Ensure there is no strong ambient light interfering with the IR signal.
  • The universal remote has a limited memory for learned commands. If you have taught many commands, it might be full.
• No new codes can be downloaded:

  This remote does not feature a mechanism to download new codes via USB or other means. All programming is done directly on the device or through its learning function.

Specifiche

Garanzia e supporto

For specific warranty information, please refer to the documentation included with your purchase or contact Philips customer support. General product support and additional resources may be available on the official Philips websito.

Immagine del prodotto

Image: Philips SRP5107/27 Universal Remote Control. This image displays the remote's ergonomic design and button layout, highlighting the device selection buttons at the top, the central navigation cluster, and the numeric keypad.