SPC800 tagliente
Sharp SPC800 Quartz Analog Twin Bell Alarm Clock
Manuale di istruzioni
Prodotto finitoview
The Sharp SPC800 is a classic quartz analog twin bell alarm clock designed for reliable timekeeping and a powerful alarm. Its traditional design features a clear dial and durable metal construction, making it a functional addition to any bedroom.
- Quartz analog twin bell alarm Clock
- Button for backlight
- Luminous glow in the dark hands
- Quadrante luminoso
Immagine: Frontale view of the Sharp SPC800 Quartz Analog Twin Bell Alarm Clock, showcasing its silver finish and classic twin bell design.
Image: A diagram highlighting the main features of the alarm clock, including its easy-to-read dial, loud twin bell alarm, touch-activated backlight, and requirement for one AA battery.
Impostare
1. Installazione della batteria
The Sharp SPC800 alarm clock requires one (1) AA battery (not included) for operation. Ensure the battery is inserted with the correct polarity (+/-) as indicated in the battery compartment.
- Individuare il vano batteria sul retro dell'orologio.
- Aprire il coperchio del vano batterie.
- Insert one (1) AA battery, matching the positive (+) and negative (-) terminals with the markings inside the compartment.
- Chiudere saldamente il coperchio del vano batterie.
2. Impostazione iniziale dell'ora
Dopo aver installato la batteria, impostare l'ora corrente.
- Individuare la manopola "TIME SET" sul retro dell'orologio.
- Rotate the "TIME SET" knob clockwise or counter-clockwise until the hour and minute hands display the correct current time.
Immagine: Posteriore view of the alarm clock, illustrating the location of the time setting knob, alarm setting knob, and the alarm on/off switch.
Istruzioni per l'uso
1. Impostazione dell'ora della sveglia
Per impostare l'orario desiderato per la sveglia:
- Individuare la manopola "ALARM SET" sul retro dell'orologio.
- Rotate the "ALARM SET" knob until the small red alarm hand on the clock face points to your desired alarm time.
- For precise setting, it is recommended to advance the main time hands past the desired alarm time to ensure the alarm hand is correctly positioned for AM/PM if applicable (though this is an analog clock, so it's a 12-hour cycle).
2. Attivazione/disattivazione dell'allarme
The alarm is activated and deactivated using the ON/OFF switch located on the back of the clock.
- To activate the alarm, slide the switch to the "ON" position.
- To deactivate the alarm, slide the switch to the "OFF" position.
- The twin bell alarm is designed to be loud and will continue ringing until manually turned off. This model does not feature a snooze function.
3. Utilizzo della retroilluminazione
Per viewing the time in low light conditions:
- Press and hold the "LIGHT" button located on the back of the clock.
- The clock face will illuminate. Release the button to turn off the backlight.
- Note: The hour and minute hands, as well as the hour markers, have a luminous glow-in-the-dark feature for passive visibility in the dark.
Manutenzione
1. Sostituzione della batteria
To ensure optimal performance, it is recommended to replace the AA battery approximately every six months, or when the clock's accuracy diminishes or the backlight becomes dim.
- Seguire i passaggi per l'installazione della batteria descritti nella sezione "Configurazione".
- Smaltire le vecchie batterie in modo responsabile secondo le normative locali.
2. Pulizia
Per pulire l'orologio, strofinare delicatamente la superficie con un panno morbido e asciutto. Evitare l'uso di detergenti abrasivi o solventi, poiché potrebbero danneggiare la finitura.
Risoluzione dei problemi
| Problema | Possibile causa/soluzione |
|---|---|
| Clock not keeping accurate time or stops working. | Battery is low or depleted. Replace with a fresh AA battery. Ensure battery is inserted with correct polarity. |
| L'allarme non suona. | Ensure the alarm ON/OFF switch on the back is in the "ON" position. Check battery level and replace if necessary. Verify the alarm hand is correctly set. |
| Backlight is dim or not working. | Battery is low. Replace with a fresh AA battery. |
| Ticchettio udibile. | This is normal for a quartz analog movement and not an indication of a defect. The sound may be more noticeable in quiet environments. |
| Alarm rings slightly before or after the set time. | Due to the analog nature, minor variations in alarm activation time (a few minutes) can occur. This is typical for this type of mechanism. |
Specifiche
Image: A visual representation of the alarm clock's dimensions, indicating a width of 4.6 inches, a height of 6.5 inches, and a depth of 2.2 inches.
- Marca: Affilato
- Numero modello: SPC800
- Colore: Argento
- Tipo di visualizzazione: Analogico
- Fonte di energia: Alimentato a batteria (richiede 1 batteria AA, non inclusa)
- Dimensioni del prodotto: 2.45"L x 6.9"A
- Peso dell'articolo: 0.83 libbre (13.3 once)
- Materiale: Metallo
- Tipo di movimento: Quarzo
- Forma dell'orologio: Campana gemella
- Tipo di montaggio: Da tavolo
- Produttore: MZ Berger
- Codice UPC: 049353711119
Garanzia e supporto
This Sharp SPC800 Quartz Analog Twin Bell Alarm Clock comes with a Garanzia limitata. For specific details regarding warranty coverage, duration, and terms, please refer to the warranty card included with your product or contact Sharp customer support.
For technical assistance, troubleshooting beyond this manual, or to inquire about replacement parts, please visit the official Sharp websito web o contattare il servizio clienti. Le informazioni di contatto sono in genere reperibili sulla confezione del prodotto o sul cartellino del produttore. websito.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.