AMS 5132/1

AMS 5132/1 Radio-Controlled Pendulum Wall Clock

Manuale di istruzioni

Introduzione

Thank you for choosing the AMS 5132/1 Radio-Controlled Pendulum Wall Clock. This clock combines classic design with modern radio-controlled technology for precise timekeeping. Crafted from walnut lacquered solid wood, it is designed for indoor use. Please read this manual carefully before setup and operation to ensure proper function and longevity of your clock.

AMS 5132/1 Radio-Controlled Pendulum Wall Clock, front view

Immagine: Frontale view of the AMS 5132/1 Radio-Controlled Pendulum Wall Clock, showcasing its round dial, analog display, and walnut wood finish.

Informazioni sulla sicurezza

  • Tenere le batterie fuori dalla portata dei bambini.
  • Non esporre l'orologio a temperature estreme, alla luce solare diretta o a elevata umidità.
  • Avoid using abrasive cleaners on the wood or clock face.
  • Assicurarsi che l'orologio sia montato saldamente per evitare che cada.
  • Smaltire le batterie usate in modo responsabile secondo le normative locali.

Contenuto della confezione

Si prega di controllare la confezione per verificare la presenza dei seguenti elementi:

  • AMS 5132/1 Radio-Controlled Pendulum Wall Clock
  • Pendulum rod and bob
  • Manuale di istruzioni (questo documento)

Nota: le batterie non sono incluse e devono essere acquistate separatamente.

Impostare

  1. Disimballaggio: Carefully remove the clock and all components from the packaging. Retain packaging for future transport or storage.
  2. Installazione della batteria:
    • Individuare il vano batterie sul retro del meccanismo dell'orologio.
    • Inserire le batterie necessarie (in genere 1x AA, non incluse) rispettando la polarità indicata (+/-).
    • Chiudere il coperchio del vano batterie.
  3. Installazione del pendolo:
    • Carefully attach the pendulum rod to the hook or slot provided on the clock mechanism, usually located below the movement.
    • Ensure the pendulum hangs freely and does not touch the clock casing.
  4. Initial Time Synchronization (Radio Control):
    • Once batteries are installed, the clock hands will automatically move to the 12 o'clock position and begin searching for the radio signal. This process can take several minutes to an hour.
    • Place the clock in an area with good reception, away from electronic devices that may cause interference.
    • The clock will automatically set itself to the correct time once the signal is received.
    Close-up of a clock face showing 'RADIO CONTROLLED' text

    Image: Detail of a clock face indicating the 'RADIO CONTROLLED' feature, essential for automatic time synchronization.

  5. Montaggio dell'orologio:
    • Select a suitable wall location for mounting. Ensure the wall can support the weight of the clock.
    • Use appropriate wall anchors and screws (not included) for secure installation.
    • Hang the clock securely on the wall.

Operativo

  1. Sincronizzazione automatica dell'ora: The clock automatically receives a radio signal to ensure accurate timekeeping, including adjustments for Daylight Saving Time. This typically occurs once a day, usually in the early morning hours.
  2. Movimento del pendolo: Gently push the pendulum to start its swing. It should continue to swing rhythmically as long as the clock is powered and functioning correctly.
  3. Manual Time Adjustment (if necessary): In rare cases where the radio signal is consistently weak or unavailable, some models may offer a manual adjustment button (often labeled 'SET' or 'M.SET') on the back. Refer to specific markings on your clock's mechanism. Pressing this button usually advances the minute hand. Hold to move hands quickly. Release when close to the desired time and press repeatedly for fine adjustments. The clock will attempt to resynchronize with the radio signal after manual adjustment.

Manutenzione

  • Pulizia: Wipe the wood casing with a soft, dry cloth. For the clock face, use a clean, lint-free cloth. Do not use harsh chemicals or abrasive materials.
  • Sostituzione della batteria: Replace batteries annually or when the clock hands stop moving or the pendulum stops swinging. Always replace all batteries at the same time with new ones of the same type.
  • Cura generale: Avoid placing the clock in areas with extreme temperature fluctuations or high humidity, as this can affect the wood and the clock mechanism.

Risoluzione dei problemi

ProblemaPossibile causaSoluzione
L'orologio non funzionaBatterie scariche o inserite in modo erratoSostituire le batterie assicurandosi che la polarità sia corretta.
Ora visualizzata errataPoor radio signal receptionMove the clock to a different location, away from electronic interference. Allow time for re-synchronization.
Il pendolo non oscillaPendulum not properly installed or obstructedEnsure the pendulum is correctly hooked and swings freely without touching the casing. Gently push to start.
Clock loses time or gains timeWeak radio signal or battery issueCheck battery strength. Relocate the clock for better signal reception.

Specifiche

  • Marca: AMS
  • Numero modello: 5132/1
  • Colore: Noce
  • Materiale: Legna
  • Tipo di visualizzazione: Analogico
  • Stile: Classico
  • Forma: Girare
  • Utilizzo: Al chiuso
  • Materiale del telaio: Legna
  • Batterie incluse: NO
  • Tipo di montaggio: Montaggio a parete

Garanzia e supporto

For warranty information and customer support, please refer to the documentation provided at the time of purchase or contact your retailer. You may also visit the official AMS websito per ulteriore assistenza.

© 2026 AMS. Tutti i diritti riservati.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.