CanDo Shoulder Wheel Model 10-1150 Instruction Manual

Introduzione

The CanDo Shoulder Wheel Model 10-1150 is a rehabilitation device designed to assist in shoulder range of motion exercises. It is commonly used in physical therapy settings to improve flexibility, strength, and coordination in the shoulder joint. This manual provides essential information for the safe and effective use of the device.

Figura 1: Davanti view of the CanDo Shoulder Wheel. This image displays the full assembly of the shoulder wheel, including the large metal wheel, the central wooden block, and the vertical wooden supports.

Informazioni sulla sicurezza

Please read all safety instructions before using the CanDo Shoulder Wheel. Failure to follow these instructions may result in injury or damage to the product.

• Consult with a healthcare professional or physical therapist before beginning any exercise program with this device.
• Ensure the shoulder wheel is securely mounted to a stable wall or surface before use.
• Ispezionare regolarmente il dispositivo per verificare la presenza di segni di usura, danni o componenti allentati. Non utilizzarlo se danneggiato.
• Do not exceed your comfortable range of motion. Stop immediately if you experience pain.
• Tenere i bambini e gli animali domestici lontani dal dispositivo durante l'uso.
• This product is intended for rehabilitation and exercise purposes only.

Avvertenza sulla Proposta 65: Questo prodotto può contenere sostanze chimiche note allo Stato della California come causa di cancro e difetti alla nascita o altri danni riproduttivi.

Componenti

The CanDo Shoulder Wheel Model 10-1150 typically includes the following main components:

• Shoulder Wheel (metal wheel with spokes and handle)
• Adjustable Resistance Mechanism (central knob)
• Mounting Board/Frame (wooden structure for wall attachment)
• Mounting Hardware (screws, anchors - may vary, not explicitly listed in product data)

Figura 2: Avvicinamento view of the CanDo Shoulder Wheel's central mechanism. This image highlights the adjustable resistance knob and the attachment point of the wheel to the wooden frame.

Configurazione e installazione

Proper installation is crucial for the safe and effective operation of the shoulder wheel. It is recommended that installation be performed by two individuals.

1. Seleziona la posizione di montaggio: Choose a sturdy wall or surface capable of supporting the device and the forces applied during exercise. Ensure there are no electrical wires or plumbing within the wall at the chosen mounting points.
2. Determinare l'altezza: The center of the shoulder wheel should generally be positioned at a height that allows the user to comfortably reach the handle with their arm extended, typically around shoulder height when standing. Mark the desired mounting points.
3. Praticare i fori pilota: Using appropriate drill bits for your wall type (wood studs, concrete, drywall with anchors), drill pilot holes at the marked locations.
4. Secure Mounting Board: Attach the wooden mounting board/frame to the wall using suitable screws and anchors (not included, typically). Ensure it is level and firmly secured.
5. Attach Shoulder Wheel: The shoulder wheel assembly is typically pre-attached to its central wooden block. This block then attaches to the main mounting board. Follow specific instructions provided with your hardware for final assembly.
6. Verifica stabilità: Before use, gently pull and push on the installed shoulder wheel to ensure it is stable and does not wobble.

Note: Specific mounting hardware and instructions may vary. Always refer to any additional documentation included with your purchase.

Istruzioni per l'uso

The CanDo Shoulder Wheel is designed for controlled, rotational exercises of the shoulder joint. Always perform exercises under the guidance of a qualified professional.

1. Regola la resistenza: The central knob on the shoulder wheel allows for adjustment of resistance. Turn the knob clockwise to increase resistance and counter-clockwise to decrease it. Start with minimal resistance and gradually increase as strength and range of motion improve.
2. Posizionamento: Stand or sit comfortably facing the shoulder wheel. Position your body so that your shoulder is aligned with the center of the wheel.
3. Afferrare la maniglia: Grasp the handle firmly with the hand of the arm you intend to exercise.
4. Perform Rotations: Slowly rotate the wheel in a controlled manner, moving your arm through its comfortable range of motion. You can rotate clockwise and counter-clockwise.
5. Mantenere la postura: Keep your back straight and avoid shrugging your shoulders or leaning excessively. Focus on isolating the movement to the shoulder joint.
6. Respirazione: Breathe naturally throughout the exercise.
7. Repetitions and Sets: Follow the recommendations of your physical therapist regarding the number of repetitions, sets, and frequency of exercises.

Important: Do not force movement beyond a comfortable range. Pain indicates that the exercise should be modified or stopped.

Manutenzione

Regular maintenance ensures the longevity and safe operation of your CanDo Shoulder Wheel.

• Pulizia: Wipe down the metal wheel and wooden components with a damp panno e sapone neutro secondo necessità. Evitare detergenti abrasivi o solventi.
• Ispezione: Periodically check all screws, bolts, and connections to ensure they are tight. Inspect the wheel for any bends, cracks, or signs of fatigue.
• Lubrificazione: The central rotating mechanism may benefit from occasional lubrication with a silicone-based spray to ensure smooth operation. Apply sparingly.
• Magazzinaggio: Store the device in a dry, temperate environment away from direct sunlight or extreme temperatures.

Risoluzione dei problemi

If you encounter issues with your CanDo Shoulder Wheel, refer to the following common problems and solutions:

Specifiche

The following are the general specifications for the CanDo Shoulder Wheel Model 10-1150:

• Numero modello: 10-1150
• Dimensioni del prodotto: 38 x 8 x 38 pollici (lunghezza x larghezza x altezza)
• Peso del prodotto: Circa 28 libbre
• Produttore: PossoFare
• Tipo di prodotto: Rehabilitation Equipment, Arm Exerciser

Garanzia e supporto

For specific warranty information and customer support, please refer to the documentation provided with your purchase or contact CanDo directly. Keep your proof of purchase for warranty claims.

Produttore: PossoFare

Websito: Visit the CanDo Store on Amazon