Boschi L1313

Woods L1313 Rechargeable LED Work Light

Modello: L1313

1. Introduzione

The Woods L1313 Rechargeable LED Work Light is a portable lighting solution designed for various tasks requiring bright, reliable illumination. This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your work light.

Informazioni importanti sulla sicurezza

  • Leggere tutte le istruzioni prima dell'uso.
  • Non smontare l'unità. Per la manutenzione, rivolgersi a personale qualificato.
  • Tenere lontano da materiali infiammabili.
  • Do not expose to excessive moisture or immerse in water.
  • Utilizzare solo il caricabatterie fornito.
  • Smaltire le batterie secondo le normative locali.

2. Contenuto della confezione

Verifica che tutti gli articoli elencati di seguito siano presenti nel tuo pacco:

  • Woods L1313 Rechargeable LED Work Light (1 unit)
  • 12-Volt 500mA Transformer (AC charging adapter)
  • 7-Volt 1300mAh Li-ion Rechargeable Batteries (pre-installed)

3. Installazione e addebito iniziale

Before first use, fully charge the work light. The unit can be charged while in use.

  1. Unpack the Work Light: Estrarre con cautela la lampada da lavoro e tutti gli accessori dalla confezione.
  2. Collegare il caricabatterie: Plug the 12-volt 500mA transformer into a standard wall outlet. Connect the other end of the charger cable to the charging port on the work light.
  3. Carica iniziale: Allow approximately 3 hours for a full charge. The charging indicator (if present) will typically change color or turn off when charging is complete.
Woods L1313 Rechargeable LED Work Light with charger connected

Figure 1: Woods L1313 Work Light connected to its charger. Ensure the charger is securely plugged into both the light and a power outlet for optimal charging.

4. Istruzioni per l'uso

Accensione/spegnimento

Locate the weatherproof On/Off switch on the unit. Press the switch to turn the light ON. Press it again to turn the light OFF.

Positioning the Work Light

The work light features an adjustable stand, allowing you to direct the light beam as needed. The unit is designed to remain cool to the touch during operation, making it safe to handle and reposition.

Woods L1313 Work Light illuminating a painting task

Figure 2: The Woods L1313 Work Light positioned to illuminate a detailed task. Its adjustable design allows for precise light direction.

Battery Life and Charging During Use

A fully charged battery provides approximately 2 hours of continuous operation. For extended use, the work light can operate while simultaneously charging. Simply keep the 12-volt 500mA transformer plugged into both the light and a power source.

5. Manutenzione

Pulizia

To clean the work light, ensure it is turned off and unplugged. Wipe the exterior surfaces with a soft, damp cloth. Do not use abrasive cleaners or solvents. Avoid spraying water directly onto the unit.

Magazzinaggio

Store the work light in a cool, dry place away from direct sunlight and extreme temperatures. For prolonged storage, it is recommended to fully charge the battery every 3-6 months to maintain battery health.

Sostituzione della batteria

The 7-volt 1300mAh Li-ion rechargeable batteries are designed for long life (rated 50,000 hours for LEDs). If battery performance significantly degrades, contact customer support for replacement options. Do not attempt to replace batteries yourself unless specifically instructed by the manufacturer.

6. Risoluzione Dei Problemi

ProblemaPossibile causaSoluzione
La luce non si accende.La batteria è scarica.
Caricabatterie non collegato correttamente.
Interruttore difettoso.
Caricare la batteria per almeno 3 ore.
Ensure charger is securely plugged into both the light and a working outlet.
Contatta l'assistenza clienti.
Durata breve della batteria.Batteria non completamente carica.
Battery life degraded.
Ensure a full 3-hour charge.
Consider replacing the battery (contact support).
La luce tremola o si affievolisce.Batteria scarica.
Collegamento allentato.
Ricaricare l'unità.
Check charger connection. If problem persists, contact support.
Caricabatterie non funzionante.Presa difettosa.
Caricabatterie danneggiato.
Prova con una presa diversa.
Inspect charger for damage. Contact customer support for a replacement.

7. Specifiche

CaratteristicaDettaglio
Numero di modelloL1313
Sorgente luminosa108 lampadine LED
Flusso luminoso350 lumen
Temperatura del coloreApproximately 6500K (Daylight)
Valutazione della durata dei LED50,000 ore
Fonte di alimentazioneAlimentato a batteria / adattatore CA
Tipo di batteria7-Volt 1300mAh Li-ion Rechargeable
Durata della batteria2+ ore
Tempo di carica3 ore
Ingresso del caricabatterie120 V CA
Uscita del caricabatterie12-Volt 500mA
Lunghezza del cavo6 piedi
Materialeaddominali
FineSafety Green Powder Coated
Caratteristiche specialiRechargeable, Cool to the touch, Weatherproof On/Off switch, High output mirror reflector with Webb Optics
Dimensioni16 x 14 x 17 pollici (dimensioni del prodotto)
Peso2.8 libbre
CertificazioniETL quotato

8. Garanzia e assistenza clienti

Informazioni sulla garanzia

This Woods L1313 Rechargeable LED Work Light comes with a Garanzia limitata di 1 anno dalla data di acquisto. La presente garanzia copre i difetti di materiali e fabbricazione in condizioni di normale utilizzo. Non copre i danni derivanti da uso improprio, abuso, incidenti, riparazioni non autorizzate o normale usura. Si prega di conservare la prova d'acquisto per eventuali reclami in garanzia.

Assistenza clienti

For technical assistance, warranty claims, or to inquire about replacement parts, please contact Woods customer support. Refer to the product packaging or the official Woods websito per le informazioni di contatto più aggiornate.

Risorse online: Visit the Woods Store on Amazon

© 2024 Woods. All rights reserved. Model L1313.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.