Introduzione
The Satco S6596 is a 55-watt T6 circline fluorescent light bulb designed for various lighting fixtures. This bulb provides 3000K warm white light with an 82 CRI (Color Rendering Index) and features a 4-pin base. Its dimensions are approximately 1.13 inches in width and 9.00 inches in height.
This manual provides essential information for the safe and correct installation, operation, and maintenance of your Satco S6596 light bulb.
Informazioni sulla sicurezza
- Always disconnect power to the fixture before installing or replacing the bulb.
- Handle the bulb with care. Fluorescent bulbs are made of glass and can break if dropped or mishandled.
- Do not use this bulb in fixtures not designed for circline fluorescent bulbs or with incompatible ballasts. This bulb requires a compatible driver (ballast) to operate.
- Smaltire le lampadine fluorescenti secondo le normative locali, poiché contengono piccole quantità di mercurio.
- Avoid touching the glass portion of the bulb directly with bare hands, as oils can reduce bulb life. Use a clean cloth or gloves.
Contenuto della confezione
- 1 x Satco S6596 Circline Fluorescent Light Bulb
Configurazione e installazione
- Disconnessione dell'alimentazione: Ensure the power supply to the lighting fixture is turned off at the circuit breaker before beginning installation.
- Rimuovere la vecchia lampadina (se applicabile): If replacing an existing bulb, carefully remove it from the fixture. Note how the old bulb was connected to ensure correct installation of the new one.
- Inserire la nuova lampadina: Align the 4-pin base of the Satco S6596 bulb with the receptacle in your fixture. Gently push the bulb into place until the pins are fully seated. The connector on this bulb is flat, which may differ from older bulbs with angled connectors. Ensure your fixture's wiring allows for a flexible connection.
- Lampadina sicura: If your fixture has retaining clips or brackets, ensure the bulb is securely held. Handle the bulb with care during this step, as it is fragile.
- Ripristina alimentazione: Una volta installata saldamente la lampadina, ripristinare l'alimentazione all'apparecchio tramite l'interruttore automatico.
- Test: Accendere l'interruttore della luce per verificare che la lampadina funzioni correttamente.
Image: The Satco S6596 circline fluorescent light bulb, showing its circular shape and 4-pin base connector.
Istruzioni per l'uso
The Satco S6596 fluorescent bulb operates immediately upon receiving power from a compatible ballast. No special operating procedures are required beyond turning on the light switch connected to the fixture.
- Potenza luminosa: Provides 3800 lumens of light.
- Temperatura del colore: Emits a warm white light at 3000 Kelvin.
- Resa cromatica: Features an 82 CRI, indicating good color accuracy.
Manutenzione
- Pulizia: To clean the bulb, ensure the power is off and the bulb is cool. Gently wipe the glass with a soft, dry, lint-free cloth. Do not use liquid cleaners directly on the bulb.
- Sostituzione: Replace the bulb when it reaches the end of its life (average 12,000 hours) or if it begins to flicker or dim significantly. Follow the installation steps for replacement.
Risoluzione dei problemi
| Problema | Possibile causa | Soluzione |
|---|---|---|
| La lampadina non si accende. | No power to the fixture, loose connection, faulty bulb, or faulty ballast. | Check power supply. Ensure bulb is fully seated. Test with a known working bulb. Inspect or replace ballast if necessary. |
| La lampadina sfarfalla. | Loose connection, aging bulb, or failing ballast. | Ensure bulb is securely connected. Replace bulb if it's old. Inspect or replace ballast. |
| Bulb does not fit correctly. | Incompatible fixture or rigid wiring. | Verify fixture compatibility with a 4-pin circline T6 bulb. Ensure the fixture's power connector is flexible enough to accommodate the bulb's flat pin configuration. |
Specifiche
| Caratteristica | Dettaglio |
|---|---|
| Marca | Satco |
| Nome del modello | S6596 |
| Tipo di luce | Fluorescente |
| Cosatage | 55 watt |
| Forma della lampadina Dimensioni | T6 (Circline) |
| Base della lampadina | 4-Pin (Prong) |
| Colore chiaro | Bianco caldo |
| Temperatura del colore | 3000 gradi Celsius |
| Indice di resa cromatica (CRI) | 82 |
| Luminosità | 3800 lumen |
| Vita media | 12,000 ore |
| Voltage | 120 Volt |
| Dimensioni del prodotto | 1.13"L x 9"A |
| Materiale | Bicchiere |
| Caratteristica speciale | Work with Driver (Ballast) |
| Codice GTIN | 045923065965 |
| ASIN | B0078MXZVO |
Garanzia
This product comes with an average rated hour limited warranty. For specific warranty details and claims, please refer to the manufacturer's official documentation or contact Satco customer support.
Supporto
For further assistance, technical support, or inquiries regarding your Satco S6596 light bulb, please visit the official Satco websito o contattare il loro servizio clienti.
Nota: per ottenere informazioni di supporto più precise e aggiornate, fare sempre riferimento alle informazioni più recenti fornite dal produttore.