Genio SW-5.1 1020

Genius SW-5.1 1020 PC Speaker System

Manuale di istruzioni

1. Introduzione

Thank you for choosing the Genius SW-5.1 1020 PC Speaker System. This 5.1-channel surround sound speaker system is designed to enhance your audio experience for various devices, including PCs, laptops, tablets, mobile phones, and MP3 players. With a total output of 26 Watts, it delivers clear and immersive sound for music, movies, and games.

This manual provides detailed instructions on setting up, operating, maintaining, and troubleshooting your speaker system to ensure optimal performance and longevity.

2. Prodotto finitoview

The Genius SW-5.1 1020 system consists of a powerful subwoofer and five satellite speakers, designed to deliver a rich 5.1 surround sound experience. The subwoofer houses the main controls and connections for the system.

Genius SW-5.1 1020 PC Speaker System components

Figure 2.1: The Genius SW-5.1 1020 PC Speaker System, showing the central subwoofer unit and five satellite speakers. The subwoofer features front-facing controls for power, volume, and bass.

Genius SW-5.1 1020 PC Speaker System in a typical setup

Figura 2.2: un example setup of the Genius SW-5.1 1020 PC Speaker System, demonstrating the placement of the subwoofer and satellite speakers around a computer monitor for an immersive audio experience.

Genius SW-5.1 1020 PC Speaker System retail packaging

Figure 2.3: The retail packaging for the Genius SW-5.1 1020 Multimedia 26-watt Surround Speaker System, highlighting its key features and applications.

3. Guida all'installazione

3.1 Disimballaggio

Rimuovere con attenzione tutti i componenti dall'imballaggio. Assicurarsi di avere i seguenti articoli:

  • 1 x unità subwoofer
  • 5 altoparlanti satellitari
  • Audio connection cables (3.5mm jack or USB)
  • Cavo di alimentazione

3.2 Posizionamento degli altoparlanti

For optimal 5.1 surround sound, consider the following placement:

  • Front Left/Right: Place these speakers on either side of your monitor or listening area.
  • Centro: Place this speaker directly in front of you, typically above or below your monitor.
  • Rear Left/Right: Place these speakers behind your listening position, ideally at ear level.
  • Subwoofer: The subwoofer can be placed on the floor, preferably near a wall or corner for enhanced bass, but avoid placing it directly against a wall to prevent muffled sound.

3.3 Collegamento degli altoparlanti

  1. Collegare gli altoparlanti satellitari: Connect each of the five satellite speakers to the corresponding output jacks on the rear of the subwoofer unit. Ensure the correct speaker (Front L/R, Rear L/R, Center) is connected to its designated port.
  2. Collega la sorgente audio: Connect your audio source (PC, tablet, mobile phone, etc.) to the subwoofer using either the 3.5mm audio jack or USB connection, depending on your device and desired connectivity.
  3. Connetti alimentazione: Collegare il cavo di alimentazione all'ingresso di alimentazione del subwoofer, quindi collegare l'altra estremità a una presa elettrica standard.

4. Istruzioni per l'uso

4.1 Accensione/Spegnimento

Locate the power button on the front panel of the subwoofer. Press it once to turn the system on. The power indicator light will illuminate. Press it again to turn the system off.

4.2 Controllo del volume

The subwoofer features several control knobs on its front panel:

  • Volume principale: Adjusts the overall volume level of the entire speaker system.
  • Volume dei bassi: Controls the intensity of the bass output from the subwoofer.
  • Center Volume: Adjusts the volume of the center channel speaker.
  • Surround Volume: Adjusts the volume of the rear left and right surround speakers.

Adjust these controls to achieve your preferred audio balance.

4.3 Selezione dell'ingresso

If your system supports multiple audio inputs (e.g., 3.5mm and USB), ensure you select the correct input source on your computer or device. The speaker system will automatically detect the active audio input.

5. Manutenzione

Proper care will ensure the longevity and performance of your Genius SW-5.1 1020 speaker system.

  • Pulizia: Use a soft, dry cloth to wipe down the speaker surfaces. Do not use liquid cleaners or abrasive materials, as they may damage the finish.
  • Posizionamento: Evitare di posizionare gli altoparlanti alla luce diretta del sole, vicino a fonti di calore o in aree con elevata umidità. Assicurarsi che vi sia un'adeguata ventilazione attorno al subwoofer.
  • Gestione: Handle the speakers with care. Avoid dropping them or exposing them to strong impacts.
  • Energia: Scollegare il cavo di alimentazione dalla presa a muro se il sistema non verrà utilizzato per un periodo prolungato.

6. Risoluzione Dei Problemi

Se riscontri problemi con il tuo sistema di altoparlanti, fai riferimento ai seguenti problemi comuni e alle relative soluzioni:

ProblemaPossibile causaSoluzione
Nessun suono dagli altoparlanti
  • Alimentazione non collegata o accesa
  • Volume troppo basso
  • Incorrect audio input selected
  • Audio cables loose or faulty
  • Il dispositivo sorgente non riproduce l'audio
  • Ensure power cable is securely plugged in and power button is on.
  • Increase master volume on the subwoofer and your source device.
  • Verify the correct audio input is selected on your source device.
  • Check all audio cable connections. Try a different cable if available.
  • Ensure your source device (PC, phone) is playing audio and its volume is up.
Suono distorto o poco chiaro
  • Volume troppo alto
  • Scarsa qualità della sorgente audio
  • Speaker cables loose
  • Abbassare il volume principale.
  • Prova una sorgente audio diversa o file per verificare se il problema persiste.
  • Ensure all satellite speaker cables are securely connected to the subwoofer.
Only some speakers are working
  • Collegamento dell'altoparlante allentato
  • Cavo dell'altoparlante difettoso
  • Incorrect audio settings on source device
  • Check the connection of the non-working speaker to the subwoofer.
  • Try swapping the non-working speaker with a working one to identify if the speaker or port is faulty.
  • Ensure your source device's audio settings are configured for 5.1 surround sound output.
Il subwoofer non produce bassi
  • Bass volume too low
  • Impostazioni audio errate
  • Increase the bass volume knob on the subwoofer.
  • Check your source device's audio settings to ensure bass enhancement or subwoofer output is enabled.

7. Specifiche

Below are the technical specifications for the Genius SW-5.1 1020 PC Speaker System:

  • Nome modello: Aktivbox GENIUS SW-5.1 1020
  • Numero modello: 31731004100
  • Produttore: Genio
  • Tipo di altoparlante: Sistema di altoparlanti per computer
  • Configurazione audio surround: 5.1 canali
  • Potenza massima in uscita dell'altoparlante: 26 Watt (totale)
  • Tecnologia di connettività: USB or 3.5 mm jack
  • Modalità di uscita audio: Stereo (can be configured for 5.1 surround)
  • Dispositivi compatibili: MP3, tablet, mobile phone, PC, notebook
  • Fonte di energia: Elettrico con cavo
  • Colore: Nero
  • Materiale: Plastica
  • Tipo di montaggio: Supporto da tavolo
  • Dimensioni del prodotto: 22.8 x 16.45 x 16.6 cm (Subwoofer)
  • Peso dell'articolo: 3.28 kg (circa 7.23 libbre)
  • Componenti inclusi: Active speakers, Genius [accessories]
  • Batterie incluse: NO
  • Prima data disponibile: 15 gennaio 2020

8. Garanzia e supporto

Specific warranty information for the Genius SW-5.1 1020 PC Speaker System is not provided in the available product data. For details regarding warranty coverage, terms, and conditions, please refer to the documentation included with your purchase or contact Genius customer support directly.

For technical assistance, troubleshooting beyond this manual, or service inquiries, please visit the official Genius webo contattare il servizio clienti. Conservare la ricevuta d'acquisto come prova d'acquisto per eventuali reclami in garanzia.

© 2024 Genius. Tutti i diritti riservati.

Questo manuale è solo a scopo informativo.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.