Introduzione
The iGo 650440 Sound Disk Sports Beanie is designed to provide audio playback while keeping you comfortable during physical activity. This beanie features integrated sound disk speakers and an in-line microphone, making it suitable for listening to music and taking calls on the go. The wicking fabric helps manage moisture, ensuring comfort during use.
Informazioni sulla sicurezza
- Controllo del volume: Per prevenire danni all'udito, evitare di ascoltare musica a volumi elevati per periodi prolungati.
- Consapevolezza ambientale: Do not use the beanie in situations where the inability to hear ambient sounds could be dangerous, such as while driving, cycling in traffic, or operating heavy machinery.
- Pulizia: Refer to the 'Maintenance' section for proper cleaning instructions. Do not immerse electronic components in water.
- Rischio di soffocamento: Keep the beanie and its components away from small children and pets.
- Gestione dei cavi: Ensure the audio cable does not pose a tripping or entanglement hazard.
Contenuto della confezione
Si prega di verificare che tutti gli articoli siano presenti nel pacco:
- iGo 650440 Sound Disk Sports Beanie
- Integrated Sound Disk Speakers (pre-installed)
- Cavo audio integrato da 3.5 mm con microfono in linea
Prodotto finitoview

Image: The iGo 650440 Sound Disk Sports Beanie, showcasing its design and integrated audio components.
The iGo 650440 Sound Disk Sports Beanie integrates audio functionality directly into a comfortable, moisture-wicking beanie. Key components include:
- Beanie Fabric: Made from a wicking material designed to pull away moisture, keeping the user cool and dry.
- Sound Disk Speakers: Ultra-slim speakers are discreetly integrated into the beanie. A tunnel inside the beanie allows for adjustment of speaker position.
- Microfono in linea: Located on the audio cable, this microphone enables hands-free communication when connected to a mobile phone.
- 3.5mm Audio Plug: Standard connector for compatibility with most audio devices.
Impostare
1. Adjusting Speaker Position
- Locate the internal tunnels within the beanie fabric where the sound disk speakers are housed.
- Gently slide the speakers along these tunnels to position them directly over your ears for optimal sound delivery and comfort.
- The speakers can be partially or completely slid off the ear if desired, depending on your preference for ambient sound awareness.
2. Collegamento a un dispositivo audio
- Identify the 3.5mm audio plug at the end of the beanie's integrated cable.
- Insert this plug firmly into the 3.5mm audio jack of your smartphone, MP3 player, tablet, or other compatible audio device.
- Assicurarsi che la connessione sia sicura per evitare interruzioni audio.
Operativo
1. Wearing the Beanie
- Place the beanie on your head, ensuring a comfortable fit.
- Adjust the internal speakers as described in the 'Setup' section to align with your ears.
- The wicking fabric is designed to keep you cool and dry during activity.
2. Riproduzione audio
- Once connected to your audio device, begin playing your desired audio content.
- Adjust the volume using the controls on your connected audio device. Start with a low volume and gradually increase it to a comfortable listening level.
3. Using the In-line Microphone
- When connected to a mobile phone, the in-line microphone allows you to make and receive calls hands-free.
- Refer to your phone's operating system for specific call management functions (e.g., answering/ending calls, voice commands) that may be compatible with the in-line microphone.
Manutenzione
Cleaning the Beanie
- Before cleaning, ensure the 3.5mm audio plug is disconnected from any device.
- Si consiglia di lavaggio a mano the beanie in cold water with a mild detergent.
- Gently squeeze out excess water. Do not twist or wring the beanie.
- Lay flat to air dry. Avoid direct sunlight or high heat, which can damage the fabric and electronic components.
- Do not machine wash or tumble dry, as this can damage the integrated speakers and wiring.
Care for Electronic Components
- Avoid exposing the speakers and cable to excessive moisture.
- Do not attempt to disassemble the speakers or microphone. This will void any potential warranty.
- Store the beanie in a clean, dry place when not in use.
Risoluzione dei problemi
- Nessun suono:
- Ensure the 3.5mm audio plug is fully inserted into your audio device's jack.
- Controlla il livello del volume del tuo dispositivo audio.
- Test the beanie with a different audio device to rule out device issues.
- Scarsa qualità del suono:
- Adjust the position of the sound disk speakers over your ears for optimal clarity.
- Ensure the audio plug is clean and free of debris.
- Prova una sorgente audio diversa o file per vedere se il problema persiste.
- Microfono non funzionante:
- Confirm the 3.5mm plug is fully inserted into your mobile phone.
- Check your phone's settings to ensure the external microphone is selected or recognized.
- Test the microphone with a different application or phone call.
Specifiche
| Numero di modello | 650440 |
| Marca | io vado |
| Produttore | IGO |
| Dimensioni del prodotto | 11.45 x 7.5 x 1.4 pollici |
| Peso dell'articolo | 7.1 once |
| Diametro del driver dell'altoparlante | 35mm |
| Impedenza dell'altoparlante | 32 ohm |
| Risposta in frequenza | Frequenza |
| Sensibilità | 100 ±3dB (@ 1KHz) |
| Input Plug Diameter | 3.5mm |
Informazioni sulla garanzia
Specific warranty details for the iGo 650440 Sound Disk Sports Beanie are not provided in this manual. For information regarding warranty coverage, terms, and conditions, please refer to the documentation included with your purchase or contact the manufacturer directly.
Assistenza clienti
If you encounter issues not covered in the troubleshooting section or require further assistance, please contact iGo customer support. Contact information may be available on the product packaging, the manufacturer's official websito o tramite il tuo rivenditore.