Audio-Technica AT-LP60 Fully Automatic Belt-Drive Stereo Turntable

Introduzione

The Audio-Technica AT-LP60 is a fully automatic belt-drive stereo turntable designed for playing 33-1/3 and 45 RPM records. It features a built-in switchable phono pre-amplifier, allowing direct connection to various audio systems and powered speakers. The turntable is equipped with an integral Audio-Technica Dual Magnet phono cartridge with a replaceable stylus.

Caratteristiche principali:

• Fully automatic operation for 33-1/3 and 45 RPM records.
• Built-in switchable phono pre-amplifier with RCA output cables.
• Integral Audio-Technica Dual Magnet phono cartridge with replaceable diamond stylus.
• Anti-resonance die-cast aluminum platter to minimize vibration.
• Damped lift/cueing mechanism with front-panel control.
• Removable dust cover for protection.

Contenuto della confezione

• AT-LP60 Turntable Unit
• Copertura antipolvere
• Piatto con cinghia di trasmissione
• Tappetino antiscivolo
• Adattatore 45 giri
• Cavo audio RCA
• Adattatore di alimentazione

Istruzioni di installazione

1. Disimballaggio: Rimuovere con cautela tutti i componenti dall'imballaggio. Conservare l'imballaggio per un trasporto o uno stoccaggio futuri.
2. Installazione del piatto: Place the platter onto the turntable spindle. Ensure it sits correctly.
3. Installazione della cintura: Locate the drive belt around the inner rim of the platter and stretch it over the motor pulley. Ensure the belt is flat and not twisted.
4. Slip Mat Placement: Posizionare il tappetino di feltro sopra il piatto.
5. Attacco per copertura antipolvere: Attach the hinged dust cover to the back of the turntable.
6. Connessione audio: Connect the RCA audio cables from the turntable to your audio system (receiver, amplifier, or powered speakers). If your audio system has a dedicated "PHONO" input, connect directly to it. If not, ensure the turntable's built-in pre-amplifier is switched ON (located on the rear panel) and connect to a standard "LINE" input.
7. Collegamento elettrico: Connect the power adapter to the turntable and then to a wall outlet.

Image: Audio-Technica AT-LP60BK Turntable with dust cover open, showing a record on the platter. This image illustrates the turntable ready for use, with the dust cover raised and a record placed on the platter.

Istruzioni per l'uso

1. Accensione: Ensure the turntable is connected to power and your audio system is on.
2. Registra il luogo: Carefully place a vinyl record on the platter, centering it on the spindle. For 7-inch records, use the included 45 RPM adapter if needed.
3. Seleziona la dimensione del record: Use the "SIZE" selector switch (usually 12" or 7") to match the size of your record.
4. Seleziona velocità: Use the "SPEED" selector switch (33 or 45 RPM) to match the playback speed of your record.
5. Avvia riproduzione (automatica): Premere il tasto INIZIO button. The tonearm will automatically move to the beginning of the record and lower the stylus.
6. Interrompi riproduzione (automatico): Premere il tasto FERMARE pulsante. Il braccio si solleverà automaticamente, tornerà nella sua posizione di riposo e il piatto smetterà di girare.
7. Manual Cueing: To manually place the stylus, use the SOLLEVAMENTO DEL BRACCIO lever to raise the tonearm. Position the tonearm over the desired track, then lower the lever to gently drop the stylus onto the record.

Manutenzione

• Copertura antipolvere: Clean the dust cover gently with a soft, dry cloth. Avoid abrasive cleaners.
• Cura dello stilo: Regularly clean the stylus using a soft brush designed for stylus cleaning, brushing from back to front. Replace the stylus when sound quality degrades or after approximately 300-500 hours of use.
• Corpo del giradischi: Wipe the turntable body with a soft, dry cloth. Do not use harsh chemicals or solvents.
• Sostituzione della cinghia: The drive belt may need replacement after extended use. Refer to the full manual for specific instructions on belt replacement.

Risoluzione dei problemi

• Nessun potere: Assicurarsi che l'adattatore di alimentazione sia collegato saldamente sia al giradischi sia a una presa elettrica funzionante.
• Nessun suono o suono basso:
  • Check all audio cable connections between the turntable and your audio system.
  • Verify the PHONO/LINE switch on the turntable's rear panel is set correctly for your audio system's input.
  • Ensure your audio system's input selector is set to the correct input.
  • Controlla il livello del volume del tuo impianto audio.
• Suono saltato o distorto:
  • Pulisci accuratamente il disco.
  • Check the stylus for dirt or damage; clean or replace if necessary.
  • Ensure the turntable is placed on a stable, level surface.
• Il piatto non gira:
  • Check if the drive belt is properly seated around the platter and motor pulley.
  • Ensure the power is connected and the turntable is switched on.

Specifiche

Garanzia e supporto

The Audio-Technica AT-LP60 turntable comes with a Garanzia di 1 anni dalla data di acquisto. Conservare la prova d'acquisto per eventuali reclami in garanzia.

For technical support, troubleshooting assistance, or warranty service, please contact Audio-Technica customer support through their official websito o le informazioni di contatto fornite nella confezione del prodotto.

You can also visit the official Audio-Technica website for FAQs, additional resources, and product registration.