Introduzione
The ASI 0457 Recessed Paper Towel Dispenser is designed for commercial and public restroom environments, providing a durable and efficient solution for paper towel dispensing. This unit is engineered to be recessed into a wall, offering a sleek and space-saving design. It is constructed from high-quality stainless steel to ensure longevity and ease of maintenance.
Figura 1: Davanti view of the ASI 0457 Recessed Paper Towel Dispenser. This image displays the dispenser's brushed stainless steel finish, a key-operated lock on the upper left side of the access door, and the paper towel dispensing slot located at the bottom. The door is hinged on the right side, allowing access for refilling.
Informazioni sulla sicurezza
- Always ensure the dispenser is securely mounted according to installation guidelines to prevent accidental dislodgement.
- Exercise caution when handling the unit during installation to avoid sharp edges.
- Keep the key for the dispenser in a secure location, accessible only to authorized personnel.
- Do not attempt to force paper towels into the dispenser if it is already full, as this may cause damage or jamming.
Configurazione e installazione
The ASI 0457 is designed for recessed wall mounting. Proper installation is crucial for optimal performance and security.
Controllo pre-installazione:
- Verify that the wall opening dimensions are appropriate for the dispenser's recessed design. The product dimensions are approximately 12.75 inches (L) x 4.5 inches (W) x 17.25 inches (H) for the unit itself, with a face trim of 18.4 inches (L) x 14.2 inches (W).
- Ensure all components are present, including the dispenser unit and the tumbler lock key.
- Remove the protective PVC film from all exposed stainless steel surfaces after installation is complete.
Istruzioni di montaggio:
- Prepare the wall opening according to the dispenser's specifications. The unit requires a precise cutout for a flush recessed fit.
- Carefully insert the dispenser into the prepared opening.
- Secure the dispenser to the wall studs or appropriate blocking using suitable fasteners (not included). The structural assembly of all components is of welded construction, ensuring rigidity once installed.
- Ensure the dispenser is level and flush with the wall surface. The face trim is designed to be 1 inch (25.4mm) wide with a 1/4 inch (6.35mm) square return to the wall.
Istruzioni per l'uso
Caricamento delle salviette di carta:
- Unlock the dispenser door using the provided tumbler key. The door is attached to the cabinet with a full-length stainless steel piano hinge.
- Open the door fully to access the interior compartment.
- Load paper towels into the dispenser. The unit is designed to hold approximately 475 standard multi-fold paper towels or 350 standard C-fold paper towels.
- Ensure the paper towels are properly aligned within the dispenser to facilitate smooth dispensing.
- Close the dispenser door and lock it securely.
Distribuzione di asciugamani di carta:
Users can pull paper towels from the dispensing slot located at the bottom of the unit. The slot features a fully hemmed-in rolled edge to ensure snag-free dispensing and user safety.
Manutenzione
Regular maintenance will ensure the longevity and proper functioning of your paper towel dispenser.
- Pulizia: Clean the stainless steel surfaces regularly with a soft cloth and a mild, non-abrasive cleaner specifically designed for stainless steel. Avoid using harsh chemicals or abrasive pads, which can scratch the No. 4 satin finish.
- Ispezione: Periodically inspect the dispenser for any signs of wear, damage, or loose components. Check the hinge for smooth operation and the lock for proper engagement.
- Gestione delle chiavi: Keep the tumbler key in a safe place. If multiple ASI washroom equipment units are installed, note that keys are typically alike.
Risoluzione dei problemi
| Problema | Possibile causa | Soluzione |
|---|---|---|
| Gli asciugamani di carta non vengono erogati in modo fluido. | Overfilled dispenser, incorrect paper towel type, or misaligned towels. | Ensure dispenser is not overfilled. Use recommended multi-fold or C-fold towels. Realign towels inside the compartment. |
| Dispenser door will not open. | Incorrect key, jammed lock, or foreign object obstructing the door. | Ensure you are using the correct tumbler key. Gently try to jiggle the key while turning. Inspect for obstructions around the door edges. |
| Dispenser feels loose after installation. | Improper mounting or loose fasteners. | Re-check mounting fasteners and ensure they are securely anchored to wall studs or appropriate blocking. Consult installation guidelines. |
Specifiche
| Caratteristica | Dettaglio |
|---|---|
| Tipo di prodotto | Recessed Paper Towel Dispenser |
| Numero di modello | 0457ASI |
| Marca | Apollo (Manufacturer: ASI) |
| Materiale | Alloy 18-8 Stainless Steel, Type 304, 22 Gauge (Door, Frame, Cabinet); Engineered Wood (Fiberboard filler in door) |
| Fine | No. 4 Satin Finish |
| Tipo di montaggio | Recessed Wall Mount (Door Mount) |
| Paper Towel Capacity | 475 standard multi-fold or 350 standard C-fold paper towels |
| Product Dimensions (Overall Face Trim) | 18.4 pollici (L) x 14.2 pollici (L) |
| Product Dimensions (Recessed Unit) | Circa 12.75 pollici (L) x 4.5 pollici (W) x 17.25 pollici (H) |
| Peso dell'articolo (confezione) | 3.243 kg (circa 7.15 libbre) |
| Tipo di blocco | Tumbler Lock (keyed alike to other ASI Washroom Equipment) |
| Paese di origine | Stati Uniti |
Garanzia e supporto
For specific warranty information regarding your ASI 0457 Recessed Paper Towel Dispenser, please refer to the documentation provided at the time of purchase or contact the manufacturer, ASI, directly. Warranty terms and conditions may vary.
For technical support, replacement parts, or further assistance, please contact the manufacturer or your authorized distributor. Contact information can typically be found on the manufacturer's official websito o sulla fattura di acquisto.