Bryant Electric RL320 Fluorescent Lampsupporto Manuale dell'utente

1. Prodotto finitoview

The Bryant Electric RL320 is a medium bi-pin fluorescent lampholder designed for T8 and T12 lamps. It features a disconnect function, a 4-wire configuration, and a pedestal-type, tall profileQuesto lampholder supports both slide-on and snap-in installation methods and includes a captive nut for secure mounting. It is rated for 660 watts and 600 volts, and comes in a white finish.

Figure 1: Bryant Electric RL320 Fluorescent Lampholder. This image shows the white lampholder with its tall profile, bi-pin lamp receptacles, and the integrated screw with captive nut for mounting.

Caratteristiche principali:

• T8-T12 disconnect functionality
• Tall profile progetto
• Compatible with bi-pin lamps
• Supports both slide-on and snap-in installation

2. Informazioni importanti sulla sicurezza

ATTENZIONE: Rischio di scossa elettrica. L'installazione deve essere eseguita da un elettricista qualificato, nel rispetto di tutte le normative elettriche locali e nazionali.

• Always disconnect power at the circuit breaker or fuse box before installing, servicing, or removing the lamptitolare.
• Assicurare lampholder's voltage e cosatage ratings (600 volts, 660 watts) are compatible with your lighting fixture and electrical system.
• Non superare la potenza massima nominaletage o voltage.
• Ispezionare il lampholder for any damage before installation. Do not install if damaged.
• Tenere i bambini lontani dai componenti elettrici.

3. Configurazione e installazione

This section provides general guidelines for installing the Bryant Electric RL320 Fluorescent Lampholder. Always refer to the specific instructions provided with your lighting fixture and consult local electrical codes.

Fasi di installazione:

1. Disconnessione dell'alimentazione: Before beginning any work, turn off the power to the lighting circuit at the main electrical panel (circuit breaker or fuse box). Verify that power is off using a voltagetester.
2. Montaggio: The RL320 supports slide-on and snap-in mounting. Align the lampholder with the mounting slots on your fluorescent fixture. Slide it into place or snap it securely until it locks. Use the integrated screw with the captive nut to further secure the lampholder if required by your fixture design.
3. Cablaggio: Connect the four wires from the lampholder to the corresponding wires in your fixture's ballast or wiring harness. Ensure all connections are secure and properly insulated. The lampholder is designed for 4-wire connections.
4. Lamp Inserimento: Una volta la lampholder is securely mounted and wired, insert the T8 or T12 bi-pin fluorescent lamp by aligning the pins with the lampholder slots and rotating the lamp finché non scatta in posizione.
5. Ripristino dell'energia: After ensuring all connections are correct and secure, restore power at the main electrical panel.

4. Istruzioni per l'uso

The Bryant Electric RL320 Fluorescent Lampholder is designed for straightforward operation once installed.

Inserting a Fluorescent Lamp:

1. Ensure the power to the fixture is OFF.
2. Align the two pins at one end of the fluorescent lamp con le fessure nella lamptitolare.
3. Premi la lamp saldamente nella lampholder until the pins are fully seated.
4. Ruota la lamp approximately 90 degrees until it locks into place. You should feel a slight click or resistance indicating it is secure.
5. Repeat for the other end of the lamp if using two lamptitolari.

Removing a Fluorescent Lamp:

1. Ensure the power to the fixture is OFF.
2. Ruota la lamp approximately 90 degrees in the opposite direction of insertion until the pins are aligned with the slots.
3. Tirare delicatamente la lamp straight out from the lamptitolare.

5. Manutenzione

The Bryant Electric RL320 Fluorescent Lampholder requires minimal maintenance. Regular inspection and cleaning can help ensure its longevity and safe operation.

• Pulizia: With power disconnected, gently wipe the lampholder with a dry, soft cloth to remove dust or debris. Do not use liquid cleaners or abrasive materials.
• Ispezione: Ispezionare periodicamente il lampholder for any signs of wear, cracking, discoloration, or loose connections. If any damage is observed, disconnect power and replace the lampholder immediately.
• Lamp Sostituzione: Always replace fluorescent lamps with the correct type (T8 or T12 bi-pin) and ensure they are fully seated in the lamptitolare.

6. Risoluzione Dei Problemi

If you encounter issues with your fluorescent lighting fixture, the problem may not always be with the lampholder itself. Here are some common issues and potential solutions:

Se le procedure di risoluzione dei problemi non risolvono il problema, si consiglia di consultare un elettricista qualificato.

7. Specifiche

Detailed technical specifications for the Bryant Electric RL320 Fluorescent Lamptitolare:

8. Informazioni sulla garanzia

Bryant Electric products are manufactured to high standards. For specific warranty terms and conditions applicable to the RL320 Fluorescent Lampholder, please refer to the official warranty statement provided by Bryant Electric at the time of purchase or visit their official websito. Conservare la prova d'acquisto per eventuali reclami in garanzia.

9. Supporto

For technical assistance, product inquiries, or further support regarding your Bryant Electric RL320 Fluorescent Lampholder, please contact Bryant Electric customer service or visit their official websito. Le informazioni di contatto si trovano in genere sulla confezione del prodotto o sul sito del produttore websito.

Bryant Electric Official Websito: www.hubbell.com/bryantelectric/en/