RAB Lighting FFLED39 Future Flood LED Light User Manual

1. Prodotto finitoview

The RAB Lighting FFLED39 Future Flood LED Light is a high-performance, energy-efficient outdoor floodlight designed for various applications. This hardwired fixture features a durable bronze finish and provides cool white illumination.

Figure 1: RAB Lighting FFLED39 Future Flood LED Light

Caratteristiche principali:

• Energia: 39-watt LED
• Temperatura del colore: Bianco freddo 5100K
• Durata: 100,000 hours based on LM-80 tests
• LED: Three multi-chip 13-watt high-performance LEDs
• Ottica: NEMA type 7H x 6V with Air-flow technology heatsink
• Riflettore: Semi-specular anodized aluminum
• Guarnizioni: Silicone per alte temperature
• Fine: Bronze chip and fade-resistant polyester powder coat
• Voltage: 120-volt to 277-volt operation

2. Informazioni sulla sicurezza

Read all instructions carefully before installation and operation. Failure to follow these instructions may result in electric shock, fire, or other hazards. Keep this manual for future reference.

• Sicurezza elettrica: Installation must be performed by a qualified electrician in accordance with all national and local electrical codes. Ensure power is disconnected at the circuit breaker before installation or servicing.
• Messa a terra: The fixture must be properly grounded to prevent potential electric shock.
• Montaggio: Ensure the mounting surface is structurally sound and capable of supporting the fixture's weight (approximately 10.23 lbs).
• Temperatura di esercizio: Non utilizzare l'apparecchio al di fuori dell'intervallo di temperatura specificato.
• LED: Do not stare directly into the LED light source when the fixture is operating, as this may cause eye damage.

3. Installazione

This floodlight is designed for wall mounting and requires hardwired installation. Professional installation is recommended.

Strumenti necessari:

• Cacciavite (a croce e a taglio)
• Spellafili
• Pinze
• Drill (if mounting surface requires pilot holes)
• Chiave regolabile

Opzioni di montaggio:

The FFLED39 supports various mounting options. The standard fixture comes with a wall mount. Optional accessories may include slipfitter mounts or other specialized brackets.

Figura 2: Esample of a Slipfitter Mount (optional accessory)

Fasi di installazione:

1. Scollegare l'alimentazione: Turn off power at the circuit breaker before beginning installation. Verify power is off using a voltagetester.
2. Preparare la superficie di montaggio: Securely attach the mounting bracket to the desired wall location. Ensure the bracket is level and firmly fastened.
3. Connessioni dei cavi:
   • Connect the black wire from the fixture to the hot (L) wire from the power supply.
   • Connect the white wire from the fixture to the neutral (N) wire from the power supply.
   • Connect the green or bare copper wire from the fixture to the ground wire from the power supply.
   • Use appropriate wire connectors and ensure all connections are secure.
4. Dispositivo di montaggio: Attach the FFLED39 fixture to the mounting bracket. Secure it with the provided screws or bolts.
5. Regola l'obiettivo: Loosen the adjustment screws on the fixture to aim the light as desired. Tighten the screws firmly once the desired angle is achieved.
6. Ripristina alimentazione: Turn on power at the circuit breaker. Test the fixture for proper operation.

4. Funzionamento

The RAB Lighting FFLED39 is a hardwired floodlight. Its operation is typically controlled by an external switch or a photocell (if installed).

Operazione standard:

• Once installed and wired, the fixture will illuminate when power is supplied via the connected wall switch or control system.
• Ensure the power source is within the specified 120-277V range.

Photocell Control (Optional):

If a photocell is integrated or installed with the fixture, the light will automatically turn on at dusk and off at dawn, based on ambient light levels.

Figura 3: Esample of a Photocell (optional accessory)

5. Manutenzione

The FFLED39 LED floodlight is designed for minimal maintenance due to its long-life LED components and durable construction.

Pulizia:

• Esterno: Pulire periodicamente l'esterno dell'apparecchio con un panno morbido eamp panno per rimuovere sporco, polvere e detriti. Non utilizzare detergenti abrasivi o solventi.
• Lente: Gently wipe the lens with a clean, soft cloth to ensure maximum light output.

Ispezione:

• Ispezionare periodicamente l'apparecchio per verificare la presenza di eventuali segni di danni, collegamenti allentati o usura.
• Assicurarsi che tutti gli elementi di montaggio siano ben saldi e sicuri.
• If any damage is observed, disconnect power and contact a qualified electrician for repair or replacement.

6. Risoluzione Dei Problemi

If you experience issues with your FFLED39 floodlight, refer to the following troubleshooting guide:

If the problem persists after following these steps, contact RAB Lighting customer support or a qualified electrician.

7. Specifiche

Detailed technical specifications for the RAB Lighting FFLED39 Future Flood LED Light:

Figure 4: Indication of 100,000-hour LED lifespan

8. Garanzia e supporto

Garanzia del produttore:

The RAB Lighting FFLED39 Future Flood LED Light is covered by a Garanzia del produttore di 1 anni dalla data di acquisto. La presente garanzia copre i difetti di materiali e di fabbricazione in normali condizioni di utilizzo e manutenzione.

The warranty does not cover damage resulting from improper installation, accident, misuse, abuse, negligence, or unauthorized modification or repair.

Assistenza clienti:

For technical assistance, warranty claims, or further information, please contact RAB Lighting customer support. Refer to the official RAB Lighting websito per i dettagli di contatto attuali.