Philips F32T8/TL841/ALTO 32 Watt T8 Fluorescent Bulb Instruction Manual

Introduzione

This manual provides essential information for the safe and efficient use of your Philips F32T8/TL841/ALTO 32 Watt T8 Fluorescent Bulb. Please read these instructions carefully before installation and retain them for future reference.

The Philips F32T8/TL841/ALTO is a 32-watt T8 fluorescent lamp designed for general lighting applications. It features a medium bi-pin base, a color temperature of 4100 Kelvin (Cool White), and a color rendering index (CRI) of 85. This bulb provides 2600 lumens of brightness and has an average life of 36,000 hours, offering energy-efficient illumination.

Image: Philips F32T8/TL841/ALTO 32 Watt T8 Fluorescent Bulb. This image shows the typical appearance of the fluorescent tube.

Informazioni sulla sicurezza

WARNING: Risk of electric shock. Always disconnect power before installation, removal, or servicing.

Ensure the power supply is turned off at the circuit breaker or fuse box before handling the bulb.
Do not use in wet locations or where directly exposed to water.
Handle fluorescent bulbs carefully. They contain a small amount of mercury. In case of breakage, ventilate the area and clean up carefully according to local guidelines.
Dispose of used bulbs according to local regulations for fluorescent lamps. Do not dispose of in regular household waste.
Ensure the fixture is compatible with T8 fluorescent bulbs and has a suitable ballast.
Do not attempt to modify the bulb or use it for purposes other than intended.

Configurazione e installazione

Disconnessione dell'alimentazione: Before beginning, ensure the power to the lighting fixture is completely turned off at the circuit breaker or wall switch.
Rimuovere la vecchia lampadina (se applicabile): Se si sostituisce una lampadina esistente, ruotare con attenzione il vecchio tubo fluorescente di 90 gradi per allineare i perni con le fessure nella lampsupporto, quindi estrarlo delicatamente.
Ispezionare l'apparecchio: Controlla la lampholders for any damage or corrosion. Ensure the ballast is compatible with T8 fluorescent lamps.
Installare una nuova lampadina: Align the two pins at each end of the Philips F32T8/TL841/ALTO bulb with the slots in the lampholders. Gently push the bulb into the lampsupporti finché i perni non sono completamente inseriti.
Lampadina sicura: Rotate the bulb 90 degrees until it locks securely into place. Do not force the bulb.
Ripristina alimentazione: Una volta installata saldamente la lampadina, ripristinare l'alimentazione all'apparecchio.
Test: Accendere l'interruttore della luce per assicurarsi che la lampadina si accenda correttamente.

Istruzioni per l'uso

The Philips F32T8/TL841/ALTO fluorescent bulb operates by simply applying power to the compatible lighting fixture. Once installed correctly in a fixture with a suitable ballast, the bulb will illuminate when the power switch is turned on.

Ensure the bulb is properly seated in the fixture.
Turn on the wall switch or power supply connected to the fixture.
To turn off the light, simply turn off the wall switch or disconnect the power supply.

Manutenzione

Minimal maintenance is required for the Philips F32T8/TL841/ALTO fluorescent bulb.

Pulizia: Periodically, with the power off, gently wipe the bulb with a soft, dry, lint-free cloth to remove dust and debris. Do not use liquid cleaners directly on the bulb.
Sostituzione: Replace the bulb when it reaches the end of its life (indicated by flickering, dimming, or failure to light) or if it becomes damaged. Always follow the installation instructions when replacing.
Ispezione degli apparecchi: Regularly inspect the lighting fixture and lampholders for any signs of wear, damage, or loose connections.

Risoluzione dei problemi

Problema	Possibile causa	Soluzione
La lampadina non si accende.	Nessuna alimentazione al dispositivo. Lampadina non posizionata correttamente. Lampadina difettosa. Faulty ballast or fixture wiring.	Controllare l'interruttore/sezionatore. Ensure bulb is fully inserted and twisted into lamptitolari. Sostituirla con una nuova lampadina sicuramente funzionante. Consult a qualified electrician for fixture/ballast inspection.
La lampadina tremola o ronza.	Lampadina prossima alla fine del suo ciclo di vita. Zavorra errata o difettosa. Collegamento allentato. Cold ambient temperature.	Sostituire la lampadina. Assicurarsi che la zavorra sia compatibile e funzioni correttamente. Check bulb seating and fixture wiring (with power off). Fluorescent bulbs may flicker briefly in cold conditions before stabilizing.
La lampadina è fioca.	Lampadina prossima alla fine del suo ciclo di vita. Dust accumulation on bulb/fixture.	Sostituire la lampadina. Clean the bulb and fixture (with power off).

Specifiche

Modello: Philips F32T8/TL841/ALTO (281550)
Tipo di lampadina: T8 fluorescente
Cosatage: 32 Watt
Tipo di base: Medium Bi-Pin
Temperatura del colore: 4100 Kelvin (bianco freddo)
Luminosità: 2600 lumen
Indice di resa cromatica (CRI): 85
Lunghezza nominale: 48 inches (4 ft.)
Vita media: 36,000 ore
Utilizzo interno/esterno: Al chiuso
Voltage Frequenza: 100 to 120 Volts and 60 Hertz (Requires compatible ballast)
Peso dell'articolo: Approximately 13.42 pounds (for a pack of 30)
Dimensioni del prodotto: 48"W x 1"H (per bulb)

Garanzia e supporto

For warranty information and customer support regarding your Philips F32T8/TL841/ALTO fluorescent bulb, please refer to the packaging or contact Philips customer service directly. You can often find support contact details on the official Philips websito o tramite il rivenditore presso il quale è stato acquistato il prodotto.

Risorse online: Per ulteriori informazioni, visitare il sito ufficiale Negozio Philips su Amazon.

Modello: Philips 281550