Introduzione
The VOX StompLab 1G is a compact multi-effects modeling pedal designed for guitarists. It offers a wide array of sounds and effects, categorized by musical style for ease of use. This manual provides essential information for setting up, operating, and maintaining your StompLab 1G pedal.
Figura 1: Fronte view of the VOX StompLab 1G Multi-Effects Modeling Guitar Pedal.
Caratteristiche del prodotto
- 100 programmi preimpostati: A total of 100 preset programs are categorized into styles such as rock, blues, metal, and pop, allowing for quick sound selection.
- Interfaccia facile da usare: Designed for intuitive operation, enabling even novice users to instantly access desired sounds.
- 103 Modeling Effects: Provides 103 types of modeling effects for diverse sound shaping.
- Motore audio avanzato: Each effect model utilizes a sound engine derived from the acclaimed VOX VT+ series of modeling amps and ToneLab series multi-effect units.
- 20 User Programs: Allows users to edit and save up to 20 custom programs.
Impostare
Powering the StompLab 1G
The StompLab 1G can be powered by either an AC adapter (9V DC) or four AA batteries. An AC adapter is recommended for stable performance, especially during extended use.
- Collegamento dell'adattatore CA: Connect the 9V DC power adapter to the DC 9V input jack on the rear panel of the unit.
- Installazione della batteria: For portable use, install four AA batteries into the battery compartment located on the underside of the pedal. Refer to the "Maintenance" section for detailed battery installation instructions.
Collegamento della tua attrezzatura
Connect your guitar to the INPUT jack and your amplifier or headphones to the OUTPUT/PHONES jack. The OUTPUT/PHONES jack supports both stereo and mono connections.
Figure 2: Rear panel connections for input, output, and DC 9V power.
Video 1: This video provides an unboxing and initial overview of the StompLab 1G, demonstrating its physical features and basic connections.
Istruzioni per l'uso
The StompLab 1G features an intuitive control layout for easy sound manipulation.
Controlli finitiview
- Manopola CATEGORIA: Use this knob to select from various musical style categories (e.g., Rock & Roll, Blues, Pop, Jazz/Fusion, Ballad, Hard Rock, Metal, Hard Core, Other). Each category contains multiple preset programs.
- Manopola GAIN / VALUE1: Adjusts the gain level of the selected effect or changes the value of parameters during editing.
- Manopola LEVEL / VALUE2: Controls the overall output level or changes the value of parameters during editing.
- FOOTSWITCHES (DOWN/UP): These footswitches allow you to navigate through programs (DOWN/UP) and activate the Bypass/Tuner function by holding both simultaneously.
- Pulsante MODIFICA: Used to enter edit mode for customizing programs.
- EFFECT TYPE Button: Selects the effect type within a program during editing.
Figure 3: Control panel with Category, Gain, Level knobs, and footswitches.
Selezione dei programmi
- Girare il CATEGORIA knob to select a musical style.
- Utilizzare il GIÙ E UP footswitches to cycle through the preset programs within the selected category. The display will show the program number.
Utilizzo del sintonizzatore
To activate the built-in tuner, press and hold both the GIÙ E UP footswitches simultaneously. The display will show tuning information. Press either footswitch again to exit tuner mode.
Video 2: This video demonstrates various effects and sounds from the StompLab series, including the bass guitar version, showcasing the versatility of the pedal's modeling capabilities.
Manutenzione
Sostituzione della batteria
To replace the batteries in your StompLab 1G, follow these steps:
- Assicurarsi che l'unità sia spenta e scollegata da qualsiasi fonte di alimentazione.
- Capovolgere con attenzione l'unità.
- Unscrew the four rubber feet on the bottom panel. These feet also secure the battery compartment cover.
- Remove the bottom panel to access the battery holder.
- Replace the old AA batteries with four new ones, ensuring correct polarity (+/-).
- Securely reattach the bottom panel and screw the four rubber feet back into place.
Video 3: This video demonstrates the process of adding or replacing batteries in the StompLab effects pedal.
Pulizia
Pulire l'unità con un panno morbido e asciutto. Non utilizzare detergenti abrasivi o solventi.
Risoluzione dei problemi
- Nessun suono:
- Controllare tutti i collegamenti dei cavi (chitarra all'ingresso, uscita a amp/cuffie).
- Ensure the power adapter is securely connected or batteries are correctly installed and charged.
- Verificare che l'unità sia accesa.
- Check the volume levels on the StompLab 1G, your guitar, and your amplificatore/cuffie.
- Unexpected Sound/Distortion:
- Adjust the GAIN and LEVEL knobs.
- Ensure the correct program/effect is selected for your desired sound.
- Controllare che i cavi non siano difettosi.
- L'unità non si accende:
- Se si utilizzano batterie, sostituirle con batterie nuove.
- If using an AC adapter, ensure it is the correct 9V DC type and is functioning properly.
Specifiche
| Numero di modello | STOMPLAB1G |
| Dimensioni | 7 x 2 x 7 pollici |
| Peso dell'articolo | 2.72 once |
| Fonte di alimentazione | Battery Powered (4 AA batteries) and AC Adapter (9V) |
| Materiale del corpo | Metallo |
| Colore | Nero |
| Tipo di connettore | Jack da 1/4 di pollice |
| Interfaccia Hardware | Audio da 1/4 di pollice |
| Formato del segnale | Analogico |
Cosa c'è nella scatola
- VOX StompLab 1G Multi-Effects Modeling Guitar Pedal
- Adattatore di alimentazione
- Manuale d'uso (questo documento)
- 4 batterie AA (preinstallate o incluse separatamente)
Garanzia e supporto
Per informazioni sulla garanzia e supporto tecnico, fare riferimento al sito ufficiale VOX website or contact your local VOX dealer. Keep your purchase receipt as proof of purchase for warranty claims.