1. Prodotto finitoview
The Sunlite T12 Straight Tube Fluorescent Lamp is an energy-efficient and cost-effective lighting solution designed for various environments. This 20-watt lamp provides 1150 lumens of bright, consistent illumination with a cool white light at 4100K, creating a clean and refreshing ambiance. Its G13 bi-pin base ensures easy installation, and with an impressive lifespan of 8,000 hours, it minimizes the need for frequent replacements.
Caratteristiche principali:
- Design tradizionale: Sleek and modern, blending effortlessly into any setting.
- Efficienza energetica: Consumes only 20 watts, reducing electricity consumption and carbon footprint.
- Lunga durata: Boasts an average rated life of 8,000 hours for long-term, hassle-free use.
- Alta luminosità: Delivers 1150 lumens for excellent visibility and vibrant colors.
- Base Bi-Pin G13: Ensures easy and secure installation in compatible fixtures.
- Luce bianca fredda: 4100K color temperature provides a clean and refreshing glow.
Image: Sunlite F20T12/CW Fluorescent Lamps (30-pack).
2. Guida all'installazione
Before beginning installation, ensure the power supply to the fixture is completely disconnected to prevent electrical shock. Always handle fluorescent lamps by the ends to avoid damaging the glass or internal components.
Fasi di installazione:
- Spegni: Turn off the power to the lighting fixture at the circuit breaker or wall switch.
- Rimuovi la vecchia Lamp (se applicabile): Se si sostituisce un esistente lamp, gently twist the old lamp to disengage it from the sockets and carefully remove it.
- Allinea i pin: Align the two bi-pins on each end of the new Sunlite F20T12/CW lamp con le fessure nella l dell'apparecchioamptitolari.
- Inserisci e ruota: Insert the pins into the slots and gently twist the lamp approximately 90 degrees until it clicks securely into place. Ensure both ends are firmly seated.
- Ripristina alimentazione: Una volta la lamp is securely installed, restore power to the fixture. The lamp dovrebbe illuminarsi.
Immagine: Lamp dimensions and G13 bi-pin base detail.
3. Funzionamento
The Sunlite F20T12/CW Fluorescent Lamp operates immediately upon receiving power from a compatible fixture. Simply use the fixture's switch to turn the lamp on or off. This lamp is designed for indoor use and provides consistent, cool white illumination suitable for a variety of settings.
Applicazioni tipiche:
- Offices and Commercial Spaces
- Garage e officine
- Basements and Utility Rooms
- Residential Lighting (e.g., kitchens, laundry rooms)
Image: Sunlite T12 lamps providing illumination in an office setting.
4. Manutenzione
Fluorescente lamps require minimal maintenance. Regular cleaning and proper handling will help ensure optimal performance and extend their lifespan.
Cura e pulizia:
- Pulizia: Assicurare lamp is off and cool before cleaning. Gently wipe the lamp with a soft, dry, lint-free cloth to remove dust and debris. Do not use liquid cleaners or abrasive materials, as these can damage the lampla superficie.
- Gestione: Maneggiare sempre la lamp by its ends. Avoid touching the glass tube directly with bare hands, as oils from your skin can create hot spots and reduce lamp vita.
- Sostituzione: Sostituisci la lamp when its light output significantly diminishes, it begins to flicker excessively, or it fails to illuminate.
Disposizione:
Fluorescente lamps contain small amounts of mercury and should be disposed of according to local regulations. Do not dispose of them in regular household trash. Contact your local waste management facility or recycling center for proper disposal instructions.
5. Risoluzione Dei Problemi
If your Sunlite F20T12/CW lamp non funziona come previsto, fare riferimento ai seguenti problemi comuni e alle relative soluzioni:
| Problema | Possibile causa | Soluzione |
|---|---|---|
| Lamp non si accende | Nessuna alimentazione all'apparecchio Lamp non seduto correttamente Difettoso lamp Defective ballast (in fixture) | Controllare l'interruttore automatico e l'interruttore a parete Assicurare lamp pins are fully inserted and twisted securely Sostituisci lamp con uno nuovo Consult an electrician to check/replace ballast |
| Lamp sfarfallio o ronzio | Collegamento allentato Lamp prossimo alla fine della vita Incompatible or failing ballast Bassa temperatura ambiente | Riposizionare l'lamp fermamente Sostituisci lamp Consult an electrician to check/replace ballast Ensure operating temperature is within recommended range |
| Emissione luminosa ridotta | Dust/dirt on lamp Lamp prossimo alla fine della vita | Pulisci lamp con un panno asciutto Sostituisci lamp |
6. Specifiche tecniche
| Attributo | Specificazione |
|---|---|
| Marca | Luce solare |
| Nome del modello | Sunlite 30010 |
| Numero modello articolo | F20T12/CW |
| Tipo di luce | Fluorescente |
| Cosatage | 20 watt |
| Luminosità | 1150 lumen |
| Temperatura del colore | 4100 Kelvin (bianco freddo) |
| Base della lampadina | G13 (Medium Bi-Pin) |
| Average Rated Lifespan | 8,000 ore |
| Voltage | 120 Volt |
| Dimensioni del prodotto | 24" L x 1.5" A |
| Materiale | Policarbonato (PC) |
| Uso interno/esterno | Al chiuso |
Image: Key technical specifications of the lamp.
7. Informazioni sulla garanzia
For detailed warranty information regarding your Sunlite F20T12/CW Fluorescent Lamp, please refer to the packaging of the product. The warranty terms and conditions, including coverage period and claim procedures, are provided directly on the product packaging.
8. Assistenza clienti
Should you have any questions, require technical assistance, or need to report an issue with your Sunlite F20T12/CW Fluorescent Lamp, please contact Sunlite customer support. Refer to the product packaging or the official Sunlite website for the most current contact information, including phone numbers, email addresses, or online support portals.