AmScope M150 Series Portable LED Monocular Student Compound Microscope User Manual

Introduzione

This manual provides detailed instructions for the setup, operation, maintenance, and troubleshooting of your AmScope M150 Series Portable LED Monocular Student Compound Microscope. Please read this manual thoroughly before using the microscope to ensure proper function and longevity of the instrument.

Figure 1: The AmScope M150 Series Portable LED Monocular Student Compound Microscope, showcasingrazie al suo design compatto e agli accessori inclusi.

Contenuto della confezione

Dopo aver disimballato, verificare che tutti i componenti siano presenti:

• AmScope M150 Series Microscope Body
• Oculare WF 10x
• Oculare WF 25x
• Copertura antipolvere
• Adattatore di alimentazione CA.
• 3 batterie AA (incluse)
• Hex Wrench (for minor adjustments)

Figure 2: Included accessories for the M150C microscope, including eyepieces, dust cover, AC adapter, and batteries.

Impostare

1. Disimballaggio: Rimuovere con cautela tutti i componenti dall'imballaggio. Conservare l'imballaggio originale per un eventuale stoccaggio o trasporto futuro.

2. Posizionamento: Place the microscope on a stable, level surface away from direct sunlight, heat sources, and vibrations.

3. Collegamento elettrico:

   • For AC power, connect the provided AC adapter to the microscope's power input and plug it into a standard electrical outlet.
   • For battery operation, open the battery compartment and insert 3 AA batteries, ensuring correct polarity.

4. Installazione dell'oculare: Gently insert the desired eyepiece (10x or 25x) into the monocular viewing tube. Ensure it is seated firmly.

5. Copertura antipolvere: When not in use, always cover the microscope with the provided dust cover to protect it from dust and debris.

Istruzioni per l'uso

1. Preparazione di un campione

1. Posizionare il vetrino preparato sul supporto meccanicotage. Secure it using the stage clip.

2. Rotate the revolving nosepiece to select the lowest power objective lens (e.g., 4x or 10x). Ensure the objective clicks into place.

2. Messa a fuoco

1. Turn on the LED illumination using the power switch. Adjust the brightness using the dimmer knob to a comfortable level.

2. While looking through the eyepiece, use the manopola di messa a fuoco grossolana (larger knob) to bring the specimen into approximate focus. Rotate the knob slowly to avoid crashing the objective into the slide.

   

   Figure 3: Illustration of the co-axial coarse and fine focusing knobs, used for precise adjustment of the specimen's clarity.

3. Una volta messa a fuoco approssimativamente, utilizzare il manopola di messa a fuoco fine (smaller knob) for precise focusing and to achieve a sharp image.

3. Modifica dell'ingrandimento

1. After focusing at a lower magnification, rotate the revolving nosepiece to the next higher objective lens (e.g., 40x). The microscope is parfocal, meaning the image should remain largely in focus.

2. Use the fine focus knob to refine the image clarity at the new magnification.

3. The M150 series offers five magnification powers: 40X, 100X, 250X, 400X, and 1000X, achieved by combining the 10x/25x eyepieces with the 4x, 10x, 40x, and 100x objective lenses.

   

   Figure 4: The revolving nosepiece with multiple objective lenses, allowing for various magnification levels up to 1000x.

4. Regolazione dell'illuminazione

The LED illumination system features a dimmer control for adjusting light intensity. For optimal viewing, especially at higher magnifications, adjust the light to provide sufficient brightness without causing glare.

5. Monocular Head Rotation

Il monoculare viewing head can rotate 360 degrees, allowing for flexible viewing positions and easy sharing among multiple users without moving the entire microscope.

Figure 5: The monocular head of the microscope demonstrating its 360-degree rotation capability for ergonomic viewing.

6. Video ufficiale del prodotto

Manutenzione

• Pulizia delle lenti: Use only specialized lens cleaning paper or a soft, lint-free cloth with a small amount of lens cleaning solution. Wipe gently in a circular motion. Avoid touching optical surfaces with bare hands.

• Pulizia del corpo: Pulisci il corpo del microscopio con un panno morbido eamp stoffa. Non utilizzare prodotti chimici aggressivi o detergenti abrasivi.

• Magazzinaggio: Always cover the microscope with the dust cover when not in use. Store in a cool, dry place, away from direct sunlight and extreme temperatures.

• Sostituzione della batteria: If using batteries, replace them when the LED illumination dims significantly or stops working. Ensure correct polarity when inserting new batteries.

Risoluzione dei problemi

Specifiche

Garanzia e supporto

AmScope is committed to providing high-quality products and personalized customer service. For any questions, technical assistance, or warranty inquiries regarding your M150 Series microscope, please contact AmScope customer support directly.

Additional resources, including a PDF version of the user manual, may be available on the official AmScope websito o tramite il rivenditore presso il quale è stato acquistato il prodotto.

Per maggiori informazioni, potete visitare il sito AmScope Store on Amazon.