1. Prodotto finitoview
The Hilti TE-YX Hammer Drill Bit is engineered for demanding drilling applications in concrete, masonry, and reinforced concrete. Featuring a robust SDS-Max shank, this drill bit is designed for use with compatible combi hammers, delivering superior performance and durability. Its rebar-resistant solid carbide head and optimized fluting ensure efficient material removal and extended bit life.
Immagine 1.1: The Hilti TE-YX Hammer Drill Bit, showing its robust construction and SDS-Max shank. This image illustrates the overall design of the drill bit, highlighting its carbide tip and helical fluting.
2. Caratteristiche principali
- Rebar Resistant Solid Carbide Head: Engineered to withstand impacts with rebar, ensuring durability and consistent performance.
- Optimized Head Embedment and Brazing Process: Enhances the strength and longevity of the carbide tip.
- Double Helical Fluting: Designed for faster dust removal, which improves drilling speed and reduces wear.
- Easier to Read Longitudinal Markings: Provides clear indications for depth measurement.
- Rounded Connection End: Ensures optimal transfer of higher impact energies from the hammer drill to the bit.
- SDS-Max Style Connection End: Compatible with a wide range of combi hammers for versatile use.
- Prestazioni migliorate: The TE-YX drill bits are designed to outperform and outlast other bits in demanding applications.
3. Informazioni sulla sicurezza
Always prioritize safety when using power tools and accessories. Failure to follow safety instructions can result in serious injury or property damage.
- Dispositivi di protezione individuale (DPI): Always wear appropriate PPE, including safety glasses, hearing protection, and gloves. A dust mask is recommended when drilling concrete.
- Compatibilità degli strumenti: Ensure the drill bit is compatible with your hammer drill's chuck system (SDS-Max).
- Ispeziona il bit: Prima di ogni utilizzo, ispezionare la punta del trapano per verificare la presenza di eventuali segni di danni, crepe o usura eccessiva. Non utilizzare punte danneggiate.
- Pezzo sicuro: Always secure the material you are drilling to prevent movement during operation.
- Presa corretta: Maintain a firm grip on the hammer drill and be prepared for torque reactions.
- Evitare il surriscaldamento: Allow the drill bit to cool periodically during prolonged use to prevent overheating and premature wear.
- Pericoli elettrici: Be aware of hidden electrical wires, gas pipes, and water lines when drilling. Use a detector if necessary.
- Gestione della polvere: Concrete dust can be hazardous. Use dust extraction systems or work in well-ventilated areas.
4. Configurazione e installazione
Proper installation of the drill bit is essential for safe and effective operation.
- Scollegare l'alimentazione: Ensure your hammer drill is unplugged or its battery is removed before installing or removing any accessories.
- Gambo pulito: Wipe the SDS-Max shank of the drill bit clean to remove any dust or debris. A small amount of grease can be applied to the shank for smoother insertion and removal, and to reduce wear.
- Inserisci bit: Push the SDS-Max shank of the drill bit firmly into the hammer drill's chuck until it clicks into place. The bit should have a slight amount of play (axial movement) once installed; this is normal for SDS-Max systems.
- Verifica sicurezza: Tirare delicatamente la punta del trapano per assicurarsi che sia saldamente bloccata nel mandrino. Non dovrebbe uscire facilmente.
- Seleziona modalità: Set your hammer drill to the appropriate mode (hammer drilling for concrete/masonry).
5. Istruzioni per l'uso
Follow these guidelines for optimal drilling performance and safety.
- Posizione di perforazione Mark: Segnare chiaramente il punto esatto in cui si intende praticare il foro.
- Inizia lentamente: Iniziare a forare a bassa velocità per creare un'impronta pilota, evitando che la punta si sposti.
- Applicare una pressione costante: Once the bit has started, apply steady, firm pressure. Avoid excessive force, which can overheat the bit and the drill. Let the hammer action do the work.
- Mantenere l'angolo retto: Mantenere la punta del trapano perpendicolare alla superficie di foratura per garantire un foro dritto ed evitare la rottura della punta.
- Rimozione detriti: Periodically withdraw the drill bit slightly from the hole while drilling to allow dust and debris to escape. This improves drilling efficiency and reduces heat buildup.
- Drilling Through Rebar: The TE-YX bit is designed to be rebar resistant. If you encounter rebar, maintain steady pressure. The bit will typically cut through it, but the process may be slower.
- Profondità di perforazione: Use the depth stop on your hammer drill, if available, or the longitudinal markings on the bit to control drilling depth.
- Finitura: Once the desired depth is reached, withdraw the bit from the hole while the drill is still running to clear any remaining debris.
6. Manutenzione
Regular maintenance ensures the longevity and performance of your drill bit.
- Pulizia: After each use, clean the drill bit to remove concrete dust and debris. A wire brush can be used for stubborn residue.
- Ispezione: Regularly inspect the carbide tip for chipping, cracks, or excessive wear. Check the flutes for damage and the SDS-Max shank for deformation.
- Lubrificazione: Apply a small amount of SDS-Max grease to the shank before each use to reduce friction and wear in the chuck.
- Magazzinaggio: Conservare le punte da trapano in un luogo asciutto per prevenire la ruggine. Conservarle in una custodia protettiva o in un organizer per evitare danni alla punta in carburo.
- Sostituzione: Replace worn or damaged drill bits immediately. Using a dull or damaged bit can reduce efficiency, increase strain on your hammer drill, and pose a safety risk.
7. Risoluzione Dei Problemi
| Problema | Possibile causa | Soluzione |
|---|---|---|
| Bit not drilling effectively or slowly | Worn or dull carbide tip; Insufficient pressure; Incorrect drill mode; Excessive debris in hole. | Replace bit; Apply steady, firm pressure; Ensure hammer drill is in hammer drilling mode; Clear debris by withdrawing bit periodically. |
| Un po' incastrato nel buco | Excessive debris; Bit overheating; Drilling at an angle. | Clear debris frequently; Allow bit to cool; Maintain a straight drilling angle. |
| Vibrazione o rumore eccessivi | Damaged or bent bit; Improperly seated bit; Loose chuck. | Inspect and replace damaged bit; Re-seat bit firmly in chuck; Consult hammer drill manual for chuck issues. |
| Surriscaldamento del bit | Lack of debris removal; Excessive pressure; Prolonged continuous drilling. | Withdraw bit to clear debris; Reduce pressure; Take breaks to allow bit to cool. |
8. Specifiche
| Attributo | Dettaglio |
|---|---|
| Marca | HILTI |
| Numero di modello | 293031 |
| Tipo di gambo | SDS Max |
| Diametro di taglio | 1.5 pollici (1-1/2") |
| Lunghezza totale | 15 pollici |
| Materiale | Carburo |
| Tipo di finitura | Non rivestito |
| Tipo di scanalatura dell'utensile | Spiral (Double Helical) |
| Numero di flauti | 1 |
| Raccomandazione di superficie | Ductile, Metal |
| ASIN | B00BBKCXS0 |
9. Garanzia e supporto
For specific warranty information regarding your Hilti TE-YX Hammer Drill Bit, please refer to the documentation provided with your purchase or visit the official Hilti website. Hilti offers comprehensive support for its products.
For technical assistance, product inquiries, or service, please contact Hilti customer service directly. You can typically find contact information on the Hilti official websul sito o sulla confezione del prodotto.
Funzionario Hilti Websito: www.hilti.com