PureMounts PM-LM-TS32EB Tilting and Flat Ultra-Thin Wall Mount User Manual

1. Introduzione

This manual provides comprehensive instructions for the safe and proper installation, operation, and maintenance of your PureMounts PM-LM-TS32EB Tilting and Flat Ultra-Thin Wall Mount. This mount is designed to securely hold televisions and monitors up to 94 cm (37 inches) with VESA200 compatibility. Please read all instructions carefully before beginning installation.

2. Informazioni sulla sicurezza

• Capacità di peso: Do not exceed the maximum weight capacity specified for this mount. Overloading can result in serious injury or equipment damage.
• Superficie di montaggio: Ensure the wall or mounting surface can safely support the combined weight of the mount and the display. Consult a qualified professional if unsure.
• Utensili: Use appropriate tools for installation. Incorrect tools can cause damage or injury.
• Montaggio: Assemble the mount exactly as instructed. Improper assembly can lead to instability.
• Bambini: Tenere i bambini lontani dall'area di installazione. Le piccole parti possono rappresentare un rischio di soffocamento.
• cavi: Route all cables properly to prevent pinching or tripping hazards.
• Controlli regolari: Controllare periodicamente tutte le viti e i collegamenti per assicurarsi che siano sempre ben saldi.

3. Contenuto della confezione

Please verify that all components are present before beginning installation. Refer to the packaging for a complete and detailed list of included parts. Typically, the package includes:

• Montaggio piastra a parete
• TV/Monitor Bracket
• Mounting Hardware (screws, anchors, washers, spacers)
• Manuale di istruzioni

4. Configurazione e installazione

Before installation, ensure you have all necessary tools and that the mounting surface is suitable.

4.1 Strumenti necessari

• Matita
• Stud Finder (per pareti con montanti in legno)
• Forare con punte adeguate
• Livello
• Cacciavite con testa Phillips
• Chiave a tubo (se applicabile)
• Nastro di misurazione

4.2 Mounting Surface Preparation

Identify the type of wall you are mounting to (e.g., wood stud, concrete, brick). Different wall types require specific anchors and installation methods. Ensure there are no hidden electrical wires or plumbing in the drilling path.

4.3 Installazione della piastra a parete

1. Determine the desired height for your display.
2. Position the wall plate against the wall and use a level to ensure it is perfectly horizontal. Mark the drilling locations with a pencil.
3. Drill pilot holes at the marked locations using the appropriate drill bit size for your wall type and anchors.
4. Inserire i tasselli a muro (se richiesti dal tipo di parete).
5. Secure the wall plate to the wall using the provided screws and washers. Tighten all fasteners firmly, but do not overtighten.

4.4 TV/Monitor Bracket Installation

1. Carefully place your TV/monitor face down on a soft, clean surface to prevent screen damage.
2. Identifica i fori di montaggio VESA sul retro del display.
3. Attach the TV/monitor bracket to the back of your display using the appropriate screws, washers, and spacers from the provided hardware kit. Ensure the screws are not too long, which could damage internal components.
4. Serrare saldamente tutte le viti.

4.5 Attaching TV/Monitor to Wall Mount

With assistance, carefully lift the TV/monitor with the attached bracket and hook it onto the wall plate assembly. Ensure the bracket is properly seated and secured to the wall mount. Engage any safety locking mechanisms if present.

Image 1: The PureMounts PM-LM-TS32EB wall mount, illustrating its articulated arm and the ability to swivel and tilt the attached display. Arrows indicate the range of motion for both the arm and the VESA plate.

5. Funzionamento del supporto

The PM-LM-TS32EB mount offers flexibility for optimal viewangoli di inclinazione.

5.1 Regolazione dell'inclinazione

To adjust the vertical tilt of your display, gently grasp the top and bottom edges of the TV/monitor and carefully tilt it to the desired angle. The mount is designed for smooth tilting motion. Ensure the tilt mechanism is secure after adjustment.

5.2 Regolazione dello snodo

To swivel your display horizontally, gently push or pull the side of the TV/monitor to rotate it along the articulated arm. The mount allows for a wide range of horizontal movement to achieve the best viewing position. Avoid excessive force.

6. Manutenzione

• Pulizia: Pulisci la montatura con un panno morbido e asciutto. Non utilizzare detergenti abrasivi o solventi, poiché potrebbero danneggiarne la finitura.
• Controlli regolari: Periodically (e.g., every 6 months) inspect all mounting screws and connections to ensure they are still tight and secure. Re-tighten if necessary.
• Movimento: If the mount's movement becomes stiff or loose, check for any obstructions or consult the manufacturer's support.

7. Risoluzione Dei Problemi

8. Specifiche

9. Garanzia e supporto

For warranty information, technical support, or to inquire about replacement parts, please refer to the documentation included with your product or visit the official PureMounts websito. I termini di garanzia specifici possono variare in base alla regione e al rivenditore.

Produttore: Montature pure

Websito: www.puremounts.de (Exampil collegamento (il collegamento effettivo può variare)