1. Introduzione
This manual provides detailed instructions for the proper installation, operation, and maintenance of your Puig 6789W Traffic Windscreen. This windscreen is specifically designed for Honda Wave models manufactured between 2012 and 2013. Please read this manual thoroughly before beginning installation to ensure correct assembly and safe use of the product.
2. Informazioni sulla sicurezza
Always prioritize safety when working on your motorcycle. Failure to follow these safety guidelines may result in injury or damage to the product or motorcycle.
- Ensure the motorcycle is stable and on a level surface before starting installation.
- Indossare dispositivi di protezione individuale adeguati, come guanti e protezioni per gli occhi.
- Do not overtighten fasteners, as this can strip threads or crack components. Refer to torque specifications if available.
- Regularly inspect the windscreen and mounting hardware for any signs of wear, damage, or looseness.
- In caso di dubbi su una qualsiasi fase del processo di installazione, consultare un meccanico di motociclette qualificato.
3. Contenuto della confezione
Verificare che tutti i componenti siano presenti e integri prima di procedere con l'installazione. Se qualche componente risulta mancante o danneggiato, contattare il rivenditore.
- 1x Puig 6789W Traffic Windscreen (Transparent)
- 1x kit di montaggio (staffe, bulloni, rondelle, dadi)
- 1x Manuale di istruzioni (questo documento)

Figure 1: The Puig 6789W Traffic Windscreen and its components.
4. Configurazione e installazione
This section details the step-by-step process for installing the Puig 6789W Traffic Windscreen on your Honda Wave (2012-2013).
4.1. Strumenti richiesti
- Set di chiavi esagonali
- Set di chiavi
- Screwdriver (Phillips or flathead, as required)
- Panno morbido per la pulizia
4.2. Fasi di installazione
- Preparare la motocicletta: Park the Honda Wave on a stable, level surface. Turn off the engine and remove the key.
- Identificare i punti di montaggio: Locate the designated mounting points on your Honda Wave's handlebars or front fairing. These are typically existing bolt holes.
- Montare le staffe: Attach the provided mounting brackets to the windscreen using the smaller bolts and washers. Do not fully tighten yet.
- Attach to Motorcycle: Carefully position the windscreen assembly onto the motorcycle's mounting points. Use the larger bolts, washers, and nuts to secure the brackets to the motorcycle. Hand-tighten all fasteners initially.
- Regola la posizione: Adjust the windscreen's angle and height to your preferred riding position. Ensure it does not obstruct your view or interfere with steering.
- Serraggio finale: Once the desired position is achieved, progressively tighten all bolts and nuts. Ensure they are secure but do not overtighten. Double-check all connections.
5. Operativo
Once installed, the Puig 6789W Traffic Windscreen operates passively by deflecting wind and debris. No active operation is required. Before each ride, perform a quick visual inspection to ensure the windscreen is securely attached and free from damage.
6. Manutenzione
Proper maintenance will extend the life and clarity of your windscreen.
- Pulizia: Clean the windscreen regularly with a soft cloth and mild soap and water. Avoid abrasive cleaners, solvents, or harsh chemicals, as these can damage the plastic material. Rinse thoroughly and dry with a clean, soft cloth.
- Ispezione: Periodically check all mounting bolts and nuts for tightness. Vibrations from riding can cause fasteners to loosen over time. Inspect the windscreen for cracks, scratches, or other damage.
- Magazzinaggio: If storing the motorcycle for an extended period, consider covering the windscreen to protect it from dust and UV exposure.
7. Risoluzione Dei Problemi
Questa sezione affronta i problemi più comuni che potresti incontrare.
| Problema | Possibile causa | Soluzione |
|---|---|---|
| Windscreen vibrates excessively | Loose mounting bolts; incorrect installation. | Check and tighten all mounting bolts. Re-evaluate installation steps. |
| Reduced visibility through windscreen | Dirt, scratches, or improper cleaning. | Clean the windscreen with mild soap and water. Avoid abrasive materials. If scratched, consider replacement. |
| Windscreen feels loose after riding | Gli elementi di fissaggio si sono allentati a causa delle vibrazioni. | Regularly inspect and tighten all mounting hardware. |
8. Specifiche
| Caratteristica | Dettaglio |
|---|---|
| Numero di modello | 6789W |
| Marca | Puig |
| Compatibilità | Honda Wave (2012-2013) |
| Colore | Transparent / Klar |
| Materiale | Plastica |
| Tipo di installazione | Vehicle-specific fit, Self-adhesive |
| Dimensioni del pacco | Dimensioni: 36 x 31 x 16 cm |
| Peso dell'articolo | 500 grammi |
9. Garanzia e supporto
I prodotti Puig sono realizzati secondo standard elevati. Per informazioni sulla copertura della garanzia, reclami o supporto tecnico, consultare il sito ufficiale Puig. website or contact your authorized Puig dealer. Keep your proof of purchase for warranty purposes.
Produttore: Puig
Websito: www.puig.tv