Bespeco TT300

Bespeco TT300 Titanium Series Instrument Cable

Manuale di istruzioni

Introduzione

The Bespeco TT300 Titanium Series Instrument Cable is designed for high-quality audio signal transmission in musical instrument applications. This cable features 1/4-inch metal jacks with 24K gold-plated connections, ensuring reliable contact and minimal signal loss. Constructed with high silicon content oxygen-free copper (OFC), it provides a noiseless and highly resistant connection, suitable for both indoor and outdoor use. The cable measures 3 meters (9.8 feet) in length and has a diameter of 7 mm.

Bespeco TT300 Titanium Series Instrument Cable packaged

Image: The Bespeco TT300 Titanium Series Instrument Cable, dark grey, shown coiled and packaged with its branding.

Impostare

Follow these steps to properly connect your Bespeco TT300 instrument cable:

  1. Identificare i connettori: The cable features two male 1/4-inch (6.3 mm) jacks. Both ends are identical in function.
  2. Connetti allo strumento: Insert one end of the cable firmly into the output jack of your musical instrument (e.g., guitar, bass, keyboard).
  3. Connettiti a Amplificatore/miscelatore: Inserire saldamente l'altra estremità del cavo nella presa di ingresso del tuo amplificatore, interfaccia audio o console di missaggio.
  4. Connessione sicura: Ensure both connections are snug to prevent signal interruption or noise. Avoid excessive force when inserting or removing the jacks.

Operativo

The Bespeco TT300 cable is designed for straightforward operation. Once connected, it facilitates the transfer of audio signals between your instrument and audio equipment. No specific operational controls are present on the cable itself.

  • Integrità del segnale: The oxygen-free copper (OFC) construction and gold-plated connectors are engineered to maintain high signal integrity and minimize interference.
  • Instradamento dei cavi: Route the cable away from power cables or other sources of electromagnetic interference to prevent unwanted noise.
  • Evita le pieghe: Do not bend or kink the cable sharply, as this can damage the internal wiring over time.

Manutenzione

Proper maintenance extends the life and performance of your instrument cable:

  • Pulizia: Wipe the cable jacket with a soft, dry cloth to remove dust and dirt. For stubborn grime, a slightly damp è possibile utilizzare un panno e procedere immediatamente all'asciugatura.
  • Cura del connettore: Keep the 1/4-inch jacks clean and free of debris. If necessary, use a cotton swab with a small amount of isopropyl alcohol to clean the metal contacts, ensuring they are dry before use.
  • Magazzinaggio: Coil the cable loosely after use. Avoid tight coiling or wrapping around sharp objects. Use the included hook-and-loop fastener or a cable tie to secure the coil. Store in a cool, dry place away from direct sunlight and extreme temperatures.
  • Ispezione: Periodically inspect the cable for any signs of wear, such as frayed insulation, exposed wires, or damaged connectors.

Risoluzione dei problemi

If you experience issues with your instrument cable, refer to the following table:

ProblemaPossibile causaSoluzione
Nessun suono o suono intermittenteLoose connection, faulty cable, or issue with instrument/amppiù vivace.Ensure both ends of the cable are fully inserted. Test with another known working cable. Check instrument and ampimpostazioni del lifier.
Rumore di ronzio o ronzioElectromagnetic interference, ground loop, or damaged shielding.Reroute the cable away from power sources. Test in a different environment. Inspect cable for damage.
Segnale debole o distortoDamaged cable, dirty connectors, or impedance mismatch.Clean connectors. Test with another cable. Ensure instrument and ample impostazioni del lifier sono appropriate.

Specifiche

CaratteristicaDettaglio
ModelloTT300
MarcaBespeco
SerieSerie Titanio
Tipo di cavoCavo dello strumento
Lunghezza3 metri (9.8 piedi)
Diametro del cavo7 millimetri
Materiale conduttoreOxygen Free Copper (O.F.C.) 99% pure copper
Connettori6.3 mm (1/4") Metal Jacks, Male-to-Male
Placcatura del connettorePlaccato oro 24K
ColoreGrigio scuro
Dispositivi compatibiliStrumento musicale
Ambiente di utilizzoInterno, Esterno
Peso dell'articolo0.31 chilogrammi (10.9 once)
Dimensioni del prodotto6.5 x 1 x 11 pollici
Codice UPC799804311978

Garanzia e supporto

For warranty information and technical support regarding your Bespeco TT300 Titanium Series Instrument Cable, please refer to the official Bespeco website or contact your authorized dealer. Specific warranty terms may vary by region and retailer.

Ufficiale Websito: www.bespeco.it

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.