Hotone Nano Legacy British Invasion 5-Watt Compact Guitar Amp Manuale d'uso del capo

1. Introduzione

The Hotone Nano Legacy British Invasion is a compact 5-watt guitar amplifier head designed to deliver classic British amplifier tones. This manual provides essential information for the safe and effective use of your amplifier. Please read it thoroughly before operation.

Caratteristiche principali:

• Ultra-compact, portable amptesta di luccio.
• Inspired by the legendary Vox AC30 amptono lificatore.
• Separate Volume and Gain control knobs.
• 3-band EQ (Bass, Middle, Treble) for tone shaping.
• Integrated FX Loop for external effects integration.

2. Istruzioni di sicurezza

• Alimentazione elettrica: Use only the specified 18V DC power adapter (center negative). Incorrect voltagpuò danneggiare l'unità.
• Ventilazione: Assicurare una ventilazione adeguata. Non ostruire le aperture di ventilazione.
• Umidità: Tenere l'unità lontana dall'acqua o da umidità eccessiva.
• Calore: Evitare di posizionare l'unità vicino a fonti di calore o alla luce diretta del sole.
• Pulizia: Pulire solo con un panno asciutto.
• Manutenzione: Non tentare di riparare l'unità da soli. Per qualsiasi intervento di manutenzione, rivolgersi a personale qualificato.

3. Prodotto finitoview

Immagine: The Hotone Nano Legacy British Invasion 5-Watt Compact Guitar Amp Head, showcasing its compact size and overall design.

Controlli del pannello frontale:

Immagine: Front panel of the Hotone Nano Legacy British Invasion amplifier head, showing input jack, EQ knobs (Bass, Middle, Treble), Gain, Volume, and Power switch. Each control is numbered and labeled for easy identification.

1. INGRESSO: 1/4" mono jack for connecting your guitar.
2. BASSO: Controls the low frequency response of your tone.
3. MEZZO: Controls the mid frequency response of your tone.
4. ALTI: Controls the high frequency response of your tone.
5. GUADAGNO: Controls the pre-amp gain level, affecting distortion and sustain.
6. VOLUME: Controlla il volume di uscita complessivo del amppiù vivace.
7. Interruttore ON/OFF: Accende o spegne l'unità.

Connessioni pannello posteriore:

Immagine: Rear panel of the Hotone Nano Legacy British Invasion amplifier head, showing power input, Phones/Line Output, AUX In, FX Loop Send/Return, and Speaker Output. Each connection point is numbered and labeled.

1. 18 V CC: Power input for the included 18V DC adapter (center negative).
2. USCITA TELEFONI/LINEA: 1/8" stereo jack for headphones or direct recording.
3. INGRESSO AUX: 1/8" stereo jack for connecting an external audio player (e.g., smartphone, MP3 player) to play along with.
4. RITORNO DEL LOOP FX: 1/4" mono jack to connect the output of your effects pedal to the amplifier's power section.
5. USCITA ALTOPARLANTE: 1/4" mono jack for connecting to a speaker cabinet (4-16Ω impedance).
6. INVIO LOOP FX: 1/4" mono jack to send the pre-amp signal to your effects pedal's input.

4. Configurazione e connessioni

1. Collegamento elettrico: Connect the supplied 18V DC power adapter to the "18V DC" input on the rear panel. Plug the adapter into a suitable power outlet.
2. Collegamento chitarra: Plug your guitar into the "INPUT" jack on the front panel using a standard 1/4" instrument cable.
3. Collegamento dell'altoparlante: Connect the "SPEAKER OUTPUT" on the rear panel to your speaker cabinet using a speaker cable. Ensure your speaker cabinet has an impedance between 4 and 16 ohms. Avvertimento: Non azionare il amplifier without a speaker connected to the SPEAKER OUTPUT, as this can damage the unit.
4. Cuffie/Uscita linea (opzionale): For silent practice or direct recording, connect headphones or a recording interface to the "PHONES/LINE OUTPUT" jack. This will mute the speaker output.
5. Ingresso AUX (opzionale): To play along with backing tracks, connect your external audio device (e.g., smartphone, MP3 player) to the "AUX IN" jack using a 1/8" stereo cable.
6. Loop FX (facoltativo): To integrate external effects pedals, connect the "FX LOOP SEND" to the input of your effects pedal and the output of your effects pedal to the "FX LOOP RETURN".

5. Istruzioni per l'uso

1. Accensione: Ensure all connections are secure, then flip the "ON/OFF" switch to the ON position. The power indicator light will illuminate.
2. Impostazioni iniziali: Start with the "VOLUME" and "GAIN" knobs set to their minimum positions (fully counter-clockwise). Set the "BASS", "MIDDLE", and "TREBLE" knobs to the 12 o'clock position (neutral).
3. Regolazione del guadagno: Slowly increase the "GAIN" knob to achieve your desired level of overdrive or distortion. Higher gain settings will produce more saturated tones.
4. Regolazione del volume: Once your gain is set, slowly increase the "VOLUME" knob to reach your desired listening level.
5. Tone Shaping with EQ:
   • BASSO: Adjust for low-end warmth and fullness.
   • MEZZO: Adjust for presence and cut in the mix. Lowering mids can create a "scooped" sound, while boosting them can make your guitar stand out.
   • ALTI: Adjust for brightness and clarity.
6. Spegni: Before disconnecting any cables or the power supply, turn the "VOLUME" knob down and then flip the "ON/OFF" switch to the OFF position.

6. Manutenzione

• Pulizia: Utilizzare un panno morbido e asciutto per pulire la parte esterna del amplificatore. Non utilizzare detergenti liquidi, spray o solventi.
• Magazzinaggio: Conservare il amplifier in un luogo fresco e asciutto, lontano dalla luce solare diretta e da temperature estreme.
• Trasporti: Durante il trasporto, assicurarsi che amplifier è imballato in modo sicuro per evitare danni fisici.
• Cura del cavo: Regularly check all cables for signs of wear or damage. Replace faulty cables immediately.

7. Risoluzione Dei Problemi

8. Specifiche

9. Informazioni sulla garanzia

Hotone products typically come with a limited manufacturer's warranty. For specific details regarding the warranty period, coverage, and terms for your Hotone Nano Legacy British Invasion amplifier head, please refer to the warranty card included with your purchase or visit the official Hotone websito. Conservare la prova d'acquisto per eventuali reclami in garanzia.

10. Assistenza clienti

If you encounter any issues not covered in this manual or require further assistance, please contact Hotone customer support. You can usually find contact information, including email and phone numbers, on the official Hotone websito.

Visit Hotone Audio Support Page (Exampil collegamento (il collegamento effettivo può variare)