KYORITSU Digital Light Meter Model 5202

1. Introduzione

Grazie per l'acquistoasing the KYORITSU Digital Light Meter Model 5202. This device is designed for accurate measurement of illuminance in various environments. It features a separated light receiving sensor for optimal positioning, multiple measurement ranges, and a clear digital display. Please read this manual thoroughly before use to ensure safe and correct operation.

2. Informazioni sulla sicurezza

• Do not attempt to open or modify the device, except for battery replacement as described in this manual.
• Tenere il dispositivo lontano da acqua, umidità elevata e temperature estreme.
• Evitare di far cadere il dispositivo o di sottoporlo a forti impatti.
• Use only the specified battery type (9V alkaline battery).
• Smaltire le batterie secondo le normative locali.
• Ensure the sensor is clean and free from obstructions for accurate readings.

3. Prodotto finitoview

The KYORITSU Digital Light Meter 5202 is a compact and versatile instrument for measuring light levels. Its key features include:

• 3-Range Switching: Measures illuminance from low to high levels (200/2000/20000 lux).
• Ampia gamma di misurazioni: 0.1 to 19990 Lux.
• Funzione di conservazione dei dati: Blocca la misurazione corrente sul display.
• Separated Sensor: The light receiving sensor is separate from the main unit, allowing for flexible and optimal positioning during measurement, preventing interference from the user's shadow.
• Regolazione dell'offset: Allows for fine-tuning of readings.
• Ampio display LCD: Provides clear and easy-to-read digital measurements.

Figura 1: Fronte view of the KYORITSU Digital Light Meter 5202 with dimensions.

Figura 2: Posteriore view of the KYORITSU Digital Light Meter 5202 with kickstand.

4. Impostazione

4.1 Installazione della batteria

The device requires one 9V alkaline battery (included). To install or replace the battery:

1. Assicurarsi che il dispositivo sia spento.
2. Individuare il vano batterie sul retro dell'unità.
3. Remove the three screws securing the bottom bracket/back cover.
4. Carefully pry open the side seams of the main unit using a small flathead screwdriver. This will reveal the internal circuit board and the battery connection.
5. Collegare la batteria da 9 V al morsetto della batteria, rispettando la polarità corretta.
6. Place the battery into its compartment and carefully reassemble the unit, ensuring the side seams align properly before re-inserting the screws.

4.2 Collegamento del sensore

The light receiving sensor is permanently attached via a cable. Ensure the cable is not damaged or kinked before use.

5. Istruzioni per l'uso

5.1 Accensione/spegnimento

Premere il tasto ENERGIA pulsante per accendere o spegnere il dispositivo.

5.2 Selezione dell'intervallo

The device offers three measurement ranges: 200, 2000, and 20000 Lux. Select the appropriate range using the Consumo button. Start with a higher range if the light intensity is unknown to avoid over-range readings.

5.3 Esecuzione di una misurazione

1. Accendi il dispositivo.
2. Position the light receiving sensor at the point where illuminance is to be measured. Ensure the sensor surface is clean and directly facing the light source.
3. Select the appropriate measurement range.
4. Read the illuminance value displayed on the LCD screen.

5.4 Funzione di conservazione dei dati

Premere il tasto PRESA pulsante per bloccare la lettura corrente sul display. Premerlo nuovamente per disattivare il blocco e riprendere la misurazione in tempo reale.

5.5 Offset Adjustment

The device includes an offset adjustment feature. Refer to the detailed instructions in the full product catalog or contact customer support for advanced calibration procedures if precise offset adjustment is required.

6. Manutenzione

6.1 Pulizia

Wipe the device and sensor with a soft, dry cloth. Do not use abrasive cleaners or solvents. Keep the sensor surface clean to ensure accurate readings.

6.2 Sostituzione della batteria

Replace the 9V battery when the low battery indicator appears on the display or if the device fails to power on. Follow the steps outlined in Section 4.1 Battery Installation.

6.3 Conservazione

When not in use for extended periods, remove the battery to prevent leakage. Store the device in a cool, dry place, away from direct sunlight and extreme temperatures.

7. Risoluzione Dei Problemi

• Il dispositivo non si accende: Controllare l'installazione della batteria e assicurarsi che sia sufficientemente carica. Sostituirla se necessario.
• Letture imprecise: Ensure the sensor surface is clean and unobstructed. Verify the correct measurement range is selected. Check for any environmental factors affecting light.
• Il display mostra 'OL' o 'OVER': The light intensity exceeds the selected range. Switch to a higher measurement range.
• Il display è vuoto o tremolante: Battery may be low or improperly installed. Replace the battery.

8. Specifiche

9. Garanzia e supporto

This product is covered by the manufacturer's standard warranty. For warranty claims, technical support, or service, please contact your local KYORITSU distributor or refer to the official KYORITSU websito per informazioni di contatto. Si prega di conservare la prova d'acquisto ai fini della garanzia.