LiftMaster 371LM

LiftMaster 371LM 1-Button Garage Remote Control

Manuale di istruzioni

1. Introduzione

The LiftMaster 371LM is a versatile 1-button remote control designed for use with compatible garage door openers and gate operators. This remote features advanced Security+ rolling code technology, which generates a new code with every use, enhancing the security of your access system. It can operate a single garage door or gate, and can also be programmed to control garage door opener lights or other small appliances equipped with a compatible receiver.

Telecomando LiftMaster 371LM a 1 pulsante

Davanti view of the LiftMaster 371LM 1-Button Remote Control, showcasing its sleek black design and single large button.

LiftMaster Security+ Rolling Code Technology

Image highlighting the LiftMaster Security+ feature, indicating that the remote sends a new code with every click for enhanced security.

LiftMaster 371LM Remote Control applications

Visual representation of the LiftMaster 371LM remote control, accompanied by text listing its ideal uses: accessing garage doors, safeguarding households, and letting children in after school.

2. Configurazione e programmazione

Before programming, ensure the remote has a working CR2 battery installed. The LiftMaster 371LM remote control is compatible with garage door openers featuring a pulsante viola di apprendimento. Always refer to your garage door opener's manual for specific programming instructions, as steps may vary slightly by model.

2.1. Fasi di programmazione

  1. Individua il pulsante Impara: On your garage door opener motor unit, locate the 'Learn' button. This button is typically purple for compatible models.
  2. Attiva la modalità di apprendimento: Press and immediately release the 'Learn' button on the motor unit. The LED indicator light next to the button will illuminate steadily for 30 seconds.
  3. Premere il pulsante del telecomando: Within 30 seconds of activating the learn mode, press and hold the button on your 371LM remote control that you wish to program.
  4. Conferma programmazione: Release the remote button when the garage door opener lights flash or you hear two clicks. This indicates successful programming.
  5. Prova il telecomando: Press the programmed button on your remote control to ensure it operates the garage door or gate correctly.
LiftMaster 371LM Remote Control with Visor Clip

The LiftMaster 371LM remote control shown alongside its included visor clip, designed for convenient attachment in a vehicle.

3. Utilizzo del telecomando

Once programmed, operating your LiftMaster 371LM remote control is straightforward.

3.1. Opening/Closing a Garage Door or Gate

  • Ensure you have a clear line of sight to the garage door or gate.
  • Press and release the programmed button on your remote control. The garage door or gate will begin to move.
  • To stop the door or gate mid-movement, press the button again.
  • To reverse the direction, press the button a third time.

3.2. Controlling Lights or Small Appliances

If your garage door opener system includes a compatible light control or accessory receiver, you can program the 371LM remote to operate these as well. Follow the specific programming instructions for your accessory to link it with the remote.

4. Manutenzione

The LiftMaster 371LM remote control requires minimal maintenance, primarily focusing on battery replacement.

4.1. Sostituzione della batteria

The remote control uses one CR2 lithium battery. When the remote's range decreases or the indicator light fails to illuminate upon button press, it's time to replace the battery.

  1. Aprire il C remotoasing: Use a small coin or screwdriver to gently pry open the remote control casing. Di solito c'è una piccola tacca sul lato o sul fondo per questo scopo.
  2. Rimuovere la vecchia batteria: Rimuovere con cautela la vecchia batteria CR2.
  3. Inserire una nuova batteria: Insert a new CR2 lithium battery, ensuring the positive (+) terminal is facing up, as indicated inside the battery compartment.
  4. Chiudi Casing: Aggancia il telecomando casing rimetterli insieme in modo sicuro.
  5. Funzionalità di prova: Test the remote control to ensure it operates correctly after battery replacement.

5. Risoluzione Dei Problemi

If your LiftMaster 371LM remote control is not functioning as expected, consider the following common issues and solutions:

  • Il telecomando non funziona dopo la programmazione:
    • Assicurati che l'apriporta del tuo garage abbia un pulsante viola di apprendimento. This remote is specifically designed for this compatibility.
    • Verify that the 'Learn' button on the motor unit was pressed and released, and the remote button was pressed within the 30-second window.
    • Controllare la batteria del telecomando. Sostituirla se necessario.
    • Try reprogramming the remote following the steps in Section 2.1.
  • Raggio operativo limitato:
    • A weak battery is the most common cause of reduced range. Replace the CR2 battery.
    • Assicurarsi che non vi siano ostacoli tra il telecomando e l'antenna dell'apriporta del garage.
    • Reposition the remote control in your vehicle. Sometimes, certain mounting positions can interfere with the signal.
    • Check if there are any sources of radio frequency interference nearby.
  • Remote Indicator Light Does Not Flash:
    • The battery may be dead or incorrectly installed. Replace the CR2 battery and ensure correct polarity.

6. Specifiche

Numero di modello371LM
ProduttoreChamberlain (LiftMaster)
Numero di parte371LM
Peso dell'articolo2.08 once
Dimensioni del prodotto4 x 4 x 1 pollici
Batterie richieste1 CR2 Lithium battery (not included)
Caratteristiche specialiErgonomic design, Security+ rolling code technology

7. Informazioni sulla sicurezza

Always prioritize safety when operating garage door openers and remote controls. Failure to follow these instructions may result in serious injury or property damage.

  • Keep Remotes Away from Children: Store remote controls out of reach of children to prevent accidental operation of the garage door or gate.
  • Observe the Door/Gate: Always keep the garage door or gate in sight when operating it with the remote control. Do not allow anyone to cross the path of a moving door or gate.
  • Sistema di inversione di sicurezza del test: Regularly test your garage door opener's safety reversal system as described in your opener's manual.
  • Sicurezza della batteria: Dispose of old batteries properly. Do not incinerate or mutilate batteries. Keep new and used batteries away from children.
  • Servizio professionale: If your garage door or opener is not functioning correctly, contact a qualified service technician.

Documenti correlati - 371LM

Preview Guida alla programmazione e all'installazione del telecomando universale LiftMaster 375UT
Guida completa alla programmazione del telecomando universale LiftMaster 375UT per apriporta da garage e cancelli. Include avvertenze di sicurezza, istruzioni dettagliate, informazioni sulla compatibilità e dettagli sulla sostituzione della batteria.
Preview Manuale di installazione e funzionamento dell'apricancello automatico LiftMaster serie LYN300, LYN400, SCS300
Manuale completo di installazione e funzionamento per gli apricancelli automatici LiftMaster serie LYN300, LYN400 e SCS300. Include norme di sicurezza, specifiche tecniche, schemi elettrici, procedure di installazione, programmazione, risoluzione dei problemi e informazioni sullo smaltimento.
Preview LiftMaster Security+ Remote Controls Models 371LM & 373LM User Guide
Comprehensive guide for LiftMaster Security+ remote controls, models 371LM and 373LM. Learn how to program, control garage door lights, erase codes, and replace batteries. Includes safety warnings and warranty information.
Preview Manuale utente dei telecomandi a 3 pulsanti LiftMaster 890MAX, 893MAX, 895MAX
Questo manuale utente fornisce istruzioni per la programmazione, l'uso e la manutenzione dei telecomandi LiftMaster a 3 pulsanti, modelli 890MAX, 893MAX e 895MAX. Include avvertenze di sicurezza, guide alla sostituzione delle batterie, informazioni sulla garanzia e dettagli su come ordinare i pezzi di ricambio.
Preview Manuale utente dei telecomandi a 3 pulsanti LiftMaster 890MAX, 893MAX, 895MAX
Istruzioni e informazioni per la programmazione e l'utilizzo dei telecomandi LiftMaster a 3 pulsanti modelli 890MAX, 893MAX e 895MAX. Include informazioni su compatibilità, sostituzione della batteria e garanzia.
Preview Programmazione e istruzioni del telecomando universale LiftMaster 380UT
Manuale utente e guida alla programmazione per il telecomando universale LiftMaster 380UT. Scopri come programmare il tuo telecomando per apriporta da garage, cancelli e porte commerciali. Include avvertenze di sicurezza, informazioni sulla batteria e dettagli su come ordinare i ricambi.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.