1. Finitaview
The Arrow GT31LI 30-Watt Cordless Hot Melt Mini Glue Gun is designed for a variety of crafting, DIY, and repair projects. Featuring a lithium-ion battery, it provides up to 100 minutes of continuous use on a single charge. The glue gun heats up rapidly, typically within one minute, allowing for quick project starts. Its compact and lightweight design ensures ease of handling and portability.

Figure 1: The Arrow GT31LI 30-Watt Cordless Hot Melt Mini Glue Gun, showcasing its compact design and red/black color scheme.
2. Istruzioni di sicurezza
- Hot Nozzle: L'ugello e la colla fusa diventano molto caldi. Evitare il contatto diretto con la pelle per evitare ustioni.
- Ventilazione: Utilizzare la pistola per colla in un luogo ben ventilato.
- Magazzinaggio: Always place the glue gun on its integrated stand when not in use to prevent melted glue from dripping onto surfaces. Store in a cool, dry place away from children.
- Spegnimento automatico: The glue gun features an automatic shut-off after five minutes of inactivity to enhance safety and conserve battery life.
- Ricarica: Charge the device only with a 5V output adapter using the provided USB cable. Using an incorrect adapter may cause charging failure.
- Glue Sticks: Use only 5/16-inch diameter mini glue sticks. Incorrect sizes may cause feeding issues or damage to the gun.
- Bambini: Keep out of reach of children. Adult supervision is required if children are using the tool.
3. Componenti inclusi
- Arrow GT31LI 30-Watt Cordless Hot Melt Mini Glue Gun
- Lithium-Ion Battery (integrated)
- Cavo di ricarica USB
- Mini Glue Sticks (quantity may vary, typically 24 included)
4. Impostazione
- Carica iniziale: Before first use, fully charge the glue gun's integrated lithium-ion battery using the provided USB charging cable and a compatible 5V output adapter. The charging indicator light will show charging status.
- Inserisci la colla stick: Insert a 5/16-inch diameter mini glue stick into the loading chamber at the rear of the glue gun. Push it gently until it stops.
5. Istruzioni per l'uso
- Accensione: Press and hold the power button (usually located near the handle) for a few seconds until the indicator light illuminates.
- Riscaldamento: The glue gun will begin to heat up. The indicator light may change color or blink to show it's heating. It typically reaches operating temperature within one minute.
- Applicazione della colla: Once the glue gun is heated and the indicator light signals readiness (e.g., solid green), gently squeeze the trigger to dispense melted glue. Apply glue to the desired surface.
- Spegnimento automatico: If the glue gun is left idle for approximately five minutes, it will automatically power off to prevent overheating and save battery. To resume operation, simply press the power button again.
- Spegni: To manually turn off the glue gun, press and hold the power button until the indicator light turns off.
6. Manutenzione
- Pulizia: Ensure the glue gun is completely cool before cleaning. Gently wipe the exterior with a damp panno. Non utilizzare detergenti abrasivi né immergere la pistola in acqua.
- Cura degli ugelli: Do not attempt to clean the nozzle while the gun is hot. Any hardened glue around the nozzle can usually be carefully removed once the gun is cool.
- Magazzinaggio: Store the glue gun in a clean, dry place. Ensure no glue stick is left partially melted in the chamber during long-term storage.
7. Risoluzione Dei Problemi
| Problema | Possibile causa | Soluzione |
|---|---|---|
| La pistola per colla non si riscalda. | La batteria è scarica o esaurita. | Charge the battery fully using the provided USB cable and a 5V adapter. |
| Glue is not dispensing. | Glue stick is not fully inserted or is the wrong size. | Ensure a 5/16-inch glue stick is fully inserted. Allow adequate heating time. |
| Glue gun shuts off unexpectedly. | Auto shut-off feature activated due to inactivity. | Press the power button to turn it back on. |
8. Specifiche
- Modello: GT31LI
- Marca: Fermaglio a freccia
- Cosatage: 30 watt
- Batteria: 1 ione di litio (incluso)
- Durata della batteria: Fino a 100 minuti con una singola carica
- Tempo di riscaldamento: 1 minuto o meno
- Diametro della colla: 5/16 pollici
- Colore: Rosso
- Materiale: Plastica
- Peso dell'articolo: 11.6 once
- Materiali compatibili: Cardboard, Cotton, Fabric, Leather, Plastic
- Componenti inclusi: Glue gun, USB charging cable
9. Garanzia e supporto
For warranty information or technical support, please refer to the documentation included with your product or visit the official Arrow Fastener webluogo. Conserva la ricevuta di acquisto per eventuali richieste di garanzia.