AKA Products Inc. 110 SC IMPACT Wide Short Course RC Tire with Red Insert

1. Prodotto finitoview

The AKA Products Inc. 110 SC IMPACT Wide Short Course RC Tire is designed for optimal performance in various remote-controlled short course vehicle applications. This tire features a medium-sized lug pattern, providing a balance of durability and grip across different track conditions. Each tire includes a red foam insert for enhanced support and performance.

Image: A single AKA 110 SC IMPACT Wide Short Course RC Tire, black with a visible red foam insert inside the rim. The tire features a distinct square lug tread pattern.

2 Caratteristiche

• Medium-Sized Lug Pattern: Engineered to offer a combination of long life and high performance.
• Applicazione versatile: Ideal for a wide range of surfaces, from hard-packed, high-grip tracks to loose and loamy conditions.
• Red Foam Inserts: Included for consistent tire support and improved handling characteristics.
• Costruzione durevole: Designed for the rigors of RC racing and general use.

3. Contenuto della confezione

Each package typically contains the following items:

• Two (2) AKA 110 SC IMPACT Wide Short Course RC Tires (Medium Compound)
• Two (2) Red Foam Inserts

Note: Contents may vary slightly based on specific product packaging or retailer.

4. Configurazione e installazione

Proper installation is crucial for optimal tire performance. Follow these steps to mount your AKA SC IMPACT tires:

1. Preparare le ruote: Ensure your short course wheels are clean and free of debris.
2. Inserto in schiuma: Carefully place the red foam insert inside the tire. Ensure it sits evenly and without twists.
3. Mount Tire: Mount the tire onto the wheel. It is recommended to use a tire mounting tool or technique that prevents damage to the tire bead or wheel.
4. Glue Tire (if applicable): For racing or aggressive driving, it is highly recommended to glue the tire bead to the wheel using a suitable RC tire glue. Apply a thin, even bead of glue around the tire's inner and outer edges where it meets the wheel. Allow sufficient drying time as per the glue manufacturer's instructions.
5. Ispezionare: After mounting and gluing, inspect the tire for any gaps, twists, or uneven seating.

Always refer to your RC vehicle's manual for specific wheel and tire compatibility.

5. Linee guida operative

To maximize the performance and lifespan of your AKA SC IMPACT tires, consider the following:

• Selezione della superficie: These tires are designed for a variety of surfaces. Experiment with tire pressure and vehicle setup to find the best performance for your specific track conditions.
• Rodaggio degli pneumatici: New tires may require a short break-in period to achieve optimal grip.
• Rotazione pneumatici: Regularly inspect and consider rotating tires (front to rear, or side to side) to promote even wear, especially if you notice uneven wear patterns.
• Magazzinaggio: Store tires in a cool, dry place away from direct sunlight and extreme temperatures to prevent rubber degradation.

6. Manutenzione

Regular maintenance helps extend the life and performance of your tires:

• Pulizia: After use, clean dirt and debris from the tires using a soft brush and mild soap and water. Rinse thoroughly and allow to air dry completely. Avoid harsh chemicals or solvents.
• Ispezione: Periodically inspect tires for cuts, tears, or excessive wear. Check the tire bead for separation from the wheel.
• Foam Inserts: If foam inserts become waterlogged or damaged, they may need to be replaced to maintain tire performance.

7. Risoluzione Dei Problemi

If you encounter issues with your tires, consider the following common solutions:

• Presa scarsa:
  • Ensure tires are clean and free of dust or oil.
  • Check for proper tire compound selection for the track surface.
  • Verify foam inserts are correctly seated and not damaged.
  • Regolare le impostazioni delle sospensioni del veicolo.
• Usura irregolare:
  • Inspect vehicle alignment and suspension components for issues.
  • Consider rotating tires.
  • Review driving style for excessive scrubbing or sliding.
• Tire Separation from Wheel:
  • Re-glue the tire bead to the wheel using appropriate RC tire glue.
  • Ensure proper surface preparation before gluing.

8. Specifiche

9. Garanzia e supporto

For warranty information, technical support, or inquiries regarding your AKA Products Inc. 110 SC IMPACT Wide Short Course RC Tires, please contact AKA Racing directly through their official websito o distributori autorizzati. Conservare la ricevuta d'acquisto come prova d'acquisto.

AKA Racing is committed to providing high-quality products and customer satisfaction.