Frigidaire 316261900

Frigidaire 316261900 Range/Stove/Oven Surface Burner Cap Instruction Manual

Modello: 316261900

Introduzione

This manual provides essential information for the proper installation, use, and maintenance of your Frigidaire 316261900 Range/Stove/Oven Surface Burner Cap. Please read these instructions carefully before proceeding to ensure safe and efficient operation.

Prodotto finitoview

The Frigidaire 316261900 is a genuine replacement surface burner cap designed for Frigidaire range, stove, and oven cooktops. This component covers the burner head, helping to distribute the flame evenly and protect the burner from spills and debris. It is made of durable cast iron and is black in color.

Frigidaire 316261900 Surface Burner Cap

Image: The Frigidaire 316261900 Surface Burner Cap, a black, circular component.

Informazioni sulla sicurezza

  • Scollegare sempre l'alimentazione dell'apparecchio prima di procedere a qualsiasi installazione o manutenzione.
  • Allow the cooktop and burner components to cool completely before handling.
  • Se necessario, indossare adeguati dispositivi di protezione individuale, come i guanti.
  • Ensure the replacement part is compatible with your appliance model.
  • In caso di dubbi su qualche passaggio, consultare un tecnico qualificato.

Configurazione e installazione

This section outlines the steps for replacing an existing surface burner cap. Ensure the cooktop is cool and the appliance is disconnected from power before beginning.

  1. Preparare l'area: Clear any cookware or debris from the cooktop surface.
  2. Rimuovere il vecchio tappo (se applicabile): Carefully lift the old burner cap off the burner head. It should simply rest on top.
  3. Ispezionare la testa del bruciatore: Check the burner head for any food residue or blockages. Clean if necessary, ensuring the igniter is clear.
  4. Posizionare il nuovo tappo: Position the new Frigidaire 316261900 burner cap directly over the burner head, ensuring it sits flat and centered. The cap should rest securely without wobbling.
  5. Funzionalità di prova: Reconnect power to the appliance. Turn on the burner to a low setting to verify proper flame distribution and ignition. The flame should be even and blue.
Frigidaire 316261900 Surface Burner Cap with measurements

Image: The Frigidaire 316261900 Surface Burner Cap held in a hand, showing its approximate dimensions (3.0 inches / 7 cm diameter).

Istruzioni per l'uso

The surface burner cap is an integral part of your cooktop's burner assembly. Once correctly installed, its operation is automatic with the use of the burner.

  • Ensure the burner cap is always in place before operating the burner.
  • The cap helps to direct the flame for efficient cooking and protects the burner head.
  • Do not operate the burner without the cap, as this can lead to improper flame distribution and potential safety hazards.

Manutenzione

Regular cleaning of the burner cap helps maintain optimal performance and appearance.

  • Pulizia giornaliera: Dopo che il piano cottura si è raffreddato, pulire il tappo del bruciatore con un pannoamp cloth and mild detergent to remove food spills.
  • Pulizia profonda: For stubborn stains, the burner cap can be removed and soaked in warm, soapy water. Use a non-abrasive brush or sponge to gently scrub away residue.
  • Essiccazione: Ensure the burner cap is completely dry before placing it back on the burner head. Moisture can interfere with ignition.
  • Evitare abrasivi: Do not use abrasive cleaners, steel wool, or harsh chemicals, as these can damage the finish of the cap.

Risoluzione dei problemi

Problemi comuni e soluzioni
ProblemaPossibile causaSoluzione
Uneven flame or poor ignitionBurner cap not seated correctly, or burner ports/igniter are dirty.Ensure the cap is flat and centered. Clean the burner head and igniter thoroughly.
Cap appears discolored or damagedNormal wear and tear, or exposure to excessive heat/harsh cleaning agents.Clean as per maintenance instructions. If severely damaged, replacement may be necessary.
Cap wobblesImproper seating or damage to the burner head.Reseat the cap. Inspect the burner head for damage.

Specifiche

  • Numero modello: 316261900
  • Marca: Frigidaire
  • Materiale: Ghisa
  • Colore: Nero
  • Peso dell'articolo: Circa 4 once (113 grammi)
  • Dimensioni: Diametro di circa 3.0 pollici (7 cm)
  • Tipo di parte: Surface Burner Cap

Garanzia e supporto

As a genuine Frigidaire replacement part, this burner cap is typically covered under the standard warranty terms for Frigidaire appliance parts. For specific warranty details, please refer to your appliance's original documentation or contact Frigidaire customer support directly.

For further assistance or to purchase additional genuine Frigidaire parts, please visit the official Frigidaire websito o contattare il loro servizio clienti.

Frigidaire Ufficiale Websito

© 2024 Frigidaire. Tutti i diritti riservati. Il presente manuale è fornito solo a scopo informativo.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.