1. Introduzione
This manual provides essential information for the installation, operation, and maintenance of your PROFLO PF5114HE Jerrit Toilet Tank. This product is designed as a tank-only configuration, allowing you to pair it with a compatible toilet bowl. Please read these instructions thoroughly before proceeding with installation or use to ensure proper function and longevity of the product.
2. Informazioni sulla sicurezza
Si prega di osservare le seguenti precauzioni di sicurezza:
- Durante l'installazione, indossare sempre dispositivi di protezione individuale (DPI) adeguati, come guanti e protezioni per gli occhi.
- Maneggiare con cura i componenti in ceramica per evitare scheggiature o rotture.
- Prima di iniziare l'installazione, assicurarsi che tutte le linee di alimentazione idrica siano chiuse.
- In caso di dubbi su qualche passaggio, consultare un idraulico qualificato.
- Non stringere eccessivamente i collegamenti, poiché ciò potrebbe causare danni.
3. Contenuto della confezione
The PROFLO PF5114HE Jerrit Toilet Tank package includes:
- PROFLO PF5114HE Jerrit Toilet Tank (White)
- Internal tank components (fill valve, flush valve, trip lever)
- Tank-to-bowl hardware (bolts, washers, nuts, gasket)
Nota: This product is a tank-only configuration. A toilet bowl and toilet seat are non inclusi e devono essere acquistati separatamente.
4. Configurazione e installazione
This section outlines the general steps for installing the PROFLO PF5114HE Jerrit Toilet Tank onto a compatible toilet bowl. Professional installation is recommended.
4.1 Preparazione
- Ensure the water supply to the toilet area is turned off.
- Remove any existing toilet tank and clean the top surface of the toilet bowl where the tank will sit.
- Inspect the new tank for any visible damage.
4.2 Tank-to-Bowl Assembly
- Place the large rubber tank-to-bowl gasket over the flush valve opening on the underside of the tank. Ensure it is seated properly.
- Carefully align the tank with the bolt holes on the back of the toilet bowl.
- Insert the tank-to-bowl bolts through the tank and the bowl holes.
- From underneath the bowl, place washers and nuts onto the bolts. Hand-tighten initially.
- Alternately tighten the nuts with a wrench, ensuring the tank is level and stable. Do not overtighten to avoid cracking the ceramic.

Figura 1: Fronte view of the PROFLO PF5114HE Jerrit Toilet Tank. This image shows the tank with its lid and flush lever, ready for installation onto a toilet bowl.
4.3 Collegamento alimentazione idrica
- Connect the flexible water supply line from the wall shut-off valve to the fill valve shank on the underside of the tank. Hand-tighten, then use a wrench for a final quarter-turn. Do not overtighten.
- Slowly turn on the water supply valve. Check for leaks at all connections.
- Allow the tank to fill. The fill valve will automatically shut off when the water level reaches the designated line inside the tank.

Figure 2: The PROFLO PF5114HE Jerrit Toilet Tank shown installed on a compatible toilet bowl. This illustrates the complete assembly of the tank and bowl.
5. Istruzioni per l'uso
The PROFLO PF5114HE Jerrit Toilet Tank operates with a standard flush mechanism. To flush the toilet:
- Press down firmly on the flush lever located on the front of the tank.
- Hold the lever down briefly until the water in the tank begins to empty into the bowl.
- Release the lever. The tank will then refill automatically to the proper water level.
This tank is designed for a 1.28 gallons-per-flush (GPF) flow rate, ensuring efficient water usage.
6. Manutenzione
6.1 Pulizia
- Pulire l'esterno del serbatoio con un panno morbido e un detergente delicato e non abrasivo.
- Avoid using harsh chemicals, abrasive pads, or strong detergents, as these can damage the finish.
- For internal cleaning, periodically inspect the fill valve and flush valve for mineral buildup. If necessary, turn off the water supply, drain the tank, and gently clean components with a soft brush.
6.2 Ispezione dei componenti
- Regularly check the tank-to-bowl connection for any signs of leaks.
- Inspect the flapper or flush valve seal for wear. A worn seal can cause continuous running water.
- Ensure the fill valve is functioning correctly and the water level is set appropriately.
7. Risoluzione Dei Problemi
Ecco le soluzioni ai problemi più comuni che potresti riscontrare:
| Problema | Possibile causa | Soluzione |
|---|---|---|
| Perdite dal serbatoio alla base | Loose tank-to-bowl bolts, worn gasket | Gently tighten tank-to-bowl bolts. If leak persists, replace the tank-to-bowl gasket. |
| Il water scorre continuamente | Worn flapper/flush valve seal, misaligned fill valve, incorrect water level | Inspect and replace flapper/seal if worn. Adjust fill valve to ensure proper water level. Check for obstructions. |
| Arrossamento debole o incompleto | Low water level, clogged siphon jet in bowl (not tank issue), flapper closing too quickly | Adjust water level higher in tank. Ensure flapper stays open long enough. Consult bowl manual for siphon jet cleaning. |
| Tank does not fill | Alimentazione idrica interrotta, valvola di riempimento intasata, valvola di riempimento difettosa | Check water supply valve. Clean or replace fill valve if necessary. |
If these steps do not resolve the issue, please contact PROFLO customer support or a qualified plumber.
8. Specifiche
| Caratteristica | Dettaglio |
|---|---|
| Numero di modello | PF5114HE |
| Colore | Bianco |
| Dimensioni del prodotto (P x L x A) | 19" x 18" x 14" |
| Materiale | Plastic (internal components), Ceramic (tank body) |
| Peso dell'articolo | 35.01 libbre |
| Tipo di installazione | Montaggio a pavimento (dal serbatoio alla tazza) |
| Portata | 1.28 gallons-per-flush (GPF) |
| Codice UPC | 781889237168 |
9. Garanzia e supporto
For warranty information, technical assistance, or to purchase replacement parts, please contact PROFLO customer support directly. Refer to the official PROFLO websito o nella documentazione di acquisto per i dettagli di contatto specifici e i termini di garanzia applicabili alla tua regione.
When contacting support, please have your model number (PF5114HE) and date of purchase readily available.