1. Introduzione
Thank you for choosing the Laufen PRO S Wall-Mounted Washbasin. This manual provides essential information for the safe installation, proper use, and effective maintenance of your new washbasinLeggere attentamente le presenti istruzioni prima dell'installazione e conservarle per riferimento futuro.
The Laufen PRO S washbasin is designed for wall-mounting, featuring a ground base for secure installation. It includes an integrated overflow and is designed without a tap hole, allowing for flexible faucet placement (e.g., wall-mounted or countertop-mounted faucet). Its dimensions are 1050 mm in length, 460 mm in width, and 175 mm in height.
- Design a parete
- Ground base for stable installation
- Without tap hole for versatile faucet options
- Equipped with an overflow
2. Informazioni sulla sicurezza
Per evitare lesioni o danni al prodotto, osservare le seguenti precauzioni di sicurezza:
- Oggetto pesante: Il lavaggioasin is heavy. Always use appropriate lifting techniques and seek assistance during transport and installation to avoid injury.
- Installazione professionale: Installation should be performed by a qualified professional plumber or installer to ensure correct and secure mounting, as well as proper plumbing connections.
- Idoneità alla parete: Ensure the wall structure is strong enough to support the weight of the washbasin and any additional load (e.g., water, user leaning on it). Consult a structural engineer if unsure.
- Approvvigionamento idrico: Chiudere l'alimentazione idrica principale prima di iniziare qualsiasi lavoro idraulico.
- Bordi taglienti: Handle with care to avoid chipping or breaking the ceramic, which can create sharp edges.
- Prodotti chimici: Avoid contact with harsh chemicals or abrasive cleaners, as they can damage the surface finish.
3. Contenuto della confezione
Verificare che tutti i componenti siano presenti e integri prima di procedere con l'installazione:
- Laufen PRO S Wall-Mounted Washbasin (1 unità)
- Mounting Kit (Laufen part number 891940)
Note: Faucet, drain, P-trap, and water supply lines are not included and must be purchased separately.
4. Configurazione e installazione
Questo lavaggioasin is designed for wall-mounted installation. Accurate measurements and secure fastening are crucial.
4.1. Strumenti e materiali necessari (non inclusi)
- Trapano e punte adatte al materiale della parete
- Level, measuring tape, pencil
- Wrenches, screwdriver
- Sigillante (silicone)
- Occhiali e guanti di sicurezza
4.2. Fasi di installazione
- Prepara il muro: Ensure the wall area for installation is clean, dry, and structurally sound. Mark the desired height for the washbasin, typically 80-90 cm from the floor to the top rim.
- Segna punti di montaggio: Using the provided mounting kit (891940) and the technical drawing as a guide, mark the precise drilling locations on the wall. Use a level to ensure accuracy. The distance between mounting bolts is critical for stability.
- Fori di perforazione: Drill holes at the marked locations to the specified depth and diameter for the mounting bolts. Insert appropriate wall anchors if required by your wall type.
- Install Mounting Bolts: Securely fasten the mounting bolts into the wall. Ensure they are firmly seated and protrude sufficiently to accommodate the washbasin.
- Collegare l'impianto idraulico: Prima di montare il basin, connect the drain assembly and any necessary faucet supply lines (if using a wall-mounted faucet). Apply sealant as required to ensure watertight connections.
- Montare il Washbasin: Sollevare con cautela la lavatriceasin and align its mounting holes with the bolts on the wall. Slide the basin sui bulloni.
- Metti in sicurezza la Basin: Attach the washers and nuts from the mounting kit onto the bolts and tighten them evenly. Do not overtighten, as this can crack the ceramic. Ensure the basin è livellato e stabile.
- Sigillare i bordi: Apply a bead of silicone sealant along the top and side edges where the washbasin meets the wall to prevent water ingress. Smooth the sealant for a clean finish.
- Final Plumbing Connections: Connect the P-trap to the drain assembly and the main waste pipe. Connect the faucet supply lines to the hot and cold water supplies.
- Test per perdite: Turn on the main water supply and check all connections for leaks. Run water into the basin and observe the drain for any drips.
5. Utilizzo
The Laufen PRO S washbasin is designed for standard bathroom use, including hand washing, face washing, and other personal hygiene activities. The integrated overflow helps prevent accidental flooding if the drain is blocked while the water is running.
6. Manutenzione e pulizia
Regular cleaning will maintain the aesthetic appeal and hygiene of your Laufen PRO S washbasin.
- Pulizia giornaliera: Wipe the surface with a soft cloth and warm soapy water. Rinse thoroughly with clean water and dry with a soft cloth to prevent water spots.
- Macchie ostinate: For more stubborn stains, use a mild, non-abrasive bathroom cleaner. Apply the cleaner to a soft sponge or cloth, gently wipe the stained area, then rinse thoroughly.
- Evitare abrasivi: Do not use abrasive cleaners, scouring pads, harsh chemicals (e.g., strong acids, alkalis, bleach-based products), or solvents, as these can damage the ceramic glaze.
- Decalcificazione: In hard water areas, limescale deposits may form. Use a descaling agent specifically designed for ceramic surfaces, following the product's instructions carefully.
- Manutenzione dello scarico: Periodically clean the drain to prevent blockages. Avoid pouring grease or harsh chemicals down the drain.
7. Risoluzione Dei Problemi
Ecco alcuni problemi comuni e le loro possibili soluzioni:
| Problema | Possibile causa | Soluzione |
|---|---|---|
| Drenaggio lento | Hair or debris blockage in the drain or P-trap. | Remove and clean the P-trap. Use a drain snake or a chemical drain cleaner (follow product instructions carefully). |
| Water Spots/Limescale | Depositi di acqua dura. | Pulisci il basin dry after each use. Use a ceramic-safe descaling agent as per instructions. |
| Connessioni che perdono | Loose plumbing connections or worn seals. | Check all plumbing connections (faucet, drain, P-trap) and tighten if loose. Replace worn washers or seals. If problem persists, consult a plumber. |
| Basin Feels Loose | Mounting bolts are loose or wall anchors are compromised. | Carefully re-tighten mounting bolts. If the issue persists, professional re-installation may be required to assess wall integrity and anchor security. |
8. Specifiche
| Marca | correre |
| Numero di modello | H8169660001091 |
| Colore | Bianco |
| Dimensioni (L x P x A) | Dimensioni: 1050 mm x 460 mm x 175 mm |
| Peso | 29.8 kg |
| Metodo di installazione | Montaggio a parete |
| Foro rubinetto | Nessuno |
| Traboccare | SÌ |
| Fine | Lucido |
| Forma | Rettangolare |
| Mounting Kit Part No. | 891940 |
9. Garanzia e supporto
For warranty information, please refer to the documentation provided at the time of purchase or contact your retailer. Laufen products are manufactured to high-quality standards, and specific warranty terms may vary by region and retailer.
For technical support, spare parts, or further assistance, please contact your local Laufen distributor or the retailer from whom you purchased the product. You may need to provide your model number (H8169660001091) and proof of purchase.