Lutron Maestro 0-10-Volt Dimmer Sensor Switch MS-Z101-WH User Manual

1. Introduzione

This manual provides detailed instructions for the installation, operation, and programming of your Lutron Maestro 0-10-Volt Dimmer Sensor Switch (Model MS-Z101-WH). This device combines a dimmer with advanced motion sensing technology to automatically control lighting in a space. It is designed for use with 0-10V LED drivers and fluorescent ballasts.

The Maestro sensor features passive infrared (PIR) detection with a 180° field of view, covering up to 900 sq. ft. for major motion and 400 sq. ft. for minor motion. Lutron's Cross Correlation Technology (XCT) enhances detection of fine movements, preventing lights from turning off unexpectedly.

Figura 1: Fronte view of the Lutron Maestro 0-10-Volt Dimmer Sensor Switch.

2. Informazioni importanti sulla sicurezza

AVVERTIMENTO: To avoid serious injury or death, always turn off power at the circuit breaker or fuse box before installing or performing any service on this device. Improper installation can result in electric shock or fire.

• Installare in conformità con tutti i codici elettrici nazionali e locali.
• Questo dispositivo deve essere installato da un elettricista qualificato o da personale addestrato.
• Do not use with any load types other than 0-10V LED drivers or fluorescent ballasts.
• Operate only in indoor, dry environments.
• Assicurarsi che il dispositivo sia adeguatamente messo a terra.

3. Contenuto della confezione

Il tuo pacco dovrebbe contenere i seguenti articoli:

• (1) Lutron Maestro 0-10-Volt Dimmer Sensor Switch (MS-Z101-WH)
• (1) Manuale di istruzioni

Note: Wall plates and companion switches are sold separately.

4. Installazione e cablaggio

Before beginning installation, ensure power is OFF at the circuit breaker.

4.1 Configurazioni di cablaggio

The MS-Z101-WH supports single-pole and 3-way/multi-location wiring. A neutral wire connection is optional.

• Unipolare: Controls lights from one location.
• 3-Way/Multi-Location: Controls lights from two or more locations. This requires either an existing mechanical 3-way switch or Lutron Maestro companion switches (MA-AS/MSC-AS), sold separately. Up to 9 companion switches can be used for control from up to 10 locations.

Figure 2: Multi-location wiring with companion switches.

4.2 Passaggi generali di installazione

1. Disattivare la corrente elettrica tramite l'interruttore automatico.
2. Rimuovere la piastra a muro e l'interruttore esistenti.
3. Identify the wiring in the wall box.
4. Connect the wires from the MS-Z101-WH to the house wiring according to the provided wiring diagram (refer to the diagram included with your product packaging for specific details).
5. Secure the dimmer sensor switch into the wall box.
6. Attach the wall plate (sold separately).
7. Ripristinare l'alimentazione all'interruttore automatico.

5. Istruzioni per l'uso

The Maestro dimmer sensor switch offers both automatic and manual control of your lighting.

Figure 3: Key components and dimensions of the dimmer sensor switch.

5.1 Automatic Operation (Occupancy/Vacancy Sensing)

• Modalità di occupazione: The sensor automatically turns lights ON when you enter the room and OFF when you leave. This is the default mode.
• Modalità posto vacante: Lights must be manually turned ON, but will automatically turn OFF when the room is vacated. This mode helps meet Title 24 requirements.

The sensor's advanced XCT technology detects both major and fine motion, ensuring lights remain on while the room is occupied.

Figure 4: Hands-free light control for convenience and energy efficiency.

5.2 Controllo manuale

• Tocca Cambia: Press the large paddle at the top to manually turn lights ON or OFF.
• Interruttore: Use the small rocker switch on the side to manually adjust the light level up or down.
• Livello preimpostato: The dimmer can be programmed to turn lights on to a specific preset brightness level automatically.

6. Caratteristiche di programmazione

The Maestro dimmer sensor switch offers several customizable settings to optimize performance for your specific needs. Refer to the detailed programming guide included with your product for step-by-step instructions.

• Tempo scaduto: Adjust how long the lights remain on after the room is vacated. Options typically include 1, 5, 15, or 30 minutes.
• Low-End Trim: Set the minimum light level to ensure stable dimming performance with your specific light fixtures.
• Sensibilità del sensore: Adjust the sensor's responsiveness to motion. Higher sensitivity detects smaller movements, while lower sensitivity reduces false triggers.
• Occupancy/Vacancy Mode: Switch between automatic ON (occupancy) and manual ON (vacancy) modes.
• Rilevamento della luce ambientale: The sensor can detect existing daylight and keep lights off if the room is already sufficiently bright, further saving energy.

Figure 5: Recommended applications for the Maestro dimmer sensor switch.

7. Manutenzione

The Lutron Maestro dimmer sensor switch requires minimal maintenance.

• Pulizia: Pulire la superficie con un panno morbido, damp panno. Non utilizzare detergenti abrasivi, solventi o prodotti chimici aggressivi, poiché potrebbero danneggiare la finitura o i componenti interni.
• Lente del sensore: Keep the sensor lens clear of dust and obstructions to ensure optimal performance.
• Nessuna parte riparabile dall'utente: Non tentare di aprire o riparare il dispositivo. Per qualsiasi intervento di assistenza, rivolgersi a personale qualificato.

8. Risoluzione Dei Problemi

9. Specifiche

10. Garanzia e supporto

Lutron products are designed for quality and reliability. For warranty information and technical support, please refer to the documentation included with your product or visit the official Lutron websito.

Servizio clienti Lutron: For assistance with installation, programming, or troubleshooting, please contact Lutron customer support.

• Websito: www.lutron.com
• Telefono: Fare riferimento a Lutron websito per i numeri di contatto regionali.