Introduzione
The Timex T129B RediSet Digital Alarm Clock is designed for convenience and reliability, offering dual alarms, a programmable snooze, nap timers, and integrated USB charging ports. This manual provides detailed instructions for setup, operation, and maintenance to ensure optimal performance of your device.
Caratteristiche del prodotto
- Doppi allarmi: Set two independent alarms for different schedules (e.g., weekdays and weekends).
- RediSet Clock: Automatic time setting upon power connection and time zone selection.
- Stazione di ricarica USB: Features two USB ports (5W for phones, 10W for tablets/quick-charge phones) to charge devices simultaneously.
- Programmable Snooze: Adjustable snooze duration from 1 to 29 minutes.
- Nap Timers: Convenient feature for short naps.
- Interruttore del volume: Select between soft or loud alarm volume.
- Batteria di backup: Maintains time and alarm settings during temporary power interruptions (requires 3 AAA batteries, not included).
- Oscuramento del display: Adjustable LED display brightness.
Impostare
- Collegamento elettrico: Connect the alarm clock to a 100V-240V universal AC adapter. The RediSet feature will automatically display the correct time.
- Selezione del fuso orario: If you are not in the Eastern Time Zone, use the "Time Zone" button (located on the back or top of the unit) to cycle through the available time zones until the correct time is displayed.
- Ora legale (DST): Locate the "DST" switch (usually on the back). Slide it to "+1" to add one hour for Daylight Saving Time, and to "-1" when DST ends.
- Installazione della batteria di backup: For battery backup, open the battery compartment (typically on the bottom or back) and insert 3 AAA batteries (not included). Ensure correct polarity. This will preserve time and alarm settings during power outages.

Immagine: Frontale view of the Timex T129B alarm clock, showing the digital time display and two front-facing USB charging ports.

Image: Diagram of the Timex T129B alarm clock highlighting features like dual alarm indicators, 0.9" LED display, 3-level dimmer, low battery indicator, 5W USB port for smartphones, 10W USB port for tablets/quick-charge, programmable snooze, nap timers, Daylight Saving Time switch, and loud/soft alarm selector.
Istruzioni per l'uso
Impostazione dell'ora
- Premere e tenere premuto il tasto IMPOSTAZIONE DELL'ORA button (usually on the top panel) until the time display flashes.
- Utilizzare il + or - pulsanti per regolare l'ora. Prestare attenzione all'indicatore PM.
- Premere IMPOSTAZIONE DELL'ORA di nuovo per passare alla regolazione dei minuti. Utilizzare + or - per impostare i minuti.
- Premere IMPOSTAZIONE DELL'ORA ancora una volta per confermare e uscire dalla modalità di impostazione dell'ora.
Impostazione degli allarmi (allarme 1 e allarme 2)
L'orologio è dotato di due sveglie indipendenti. Il procedimento è identico per entrambe.
- Premere e tenere premuto il tasto ALLARME 1 or ALLARME 2 finché l'ora della sveglia non lampeggia.
- Utilizzare il + or - pulsanti per regolare l'ora della sveglia. Osservare l'indicatore PM.
- Premere il rispettivo ALLARME nuovamente il pulsante per passare alla regolazione dei minuti. Utilizzare + or - per impostare i minuti.
- Premere il tasto ALLARME button one more time to confirm and activate the alarm. An indicator light (ALM 1 or ALM 2) will illuminate on the display.
- Per disattivare una sveglia attiva, premere il tasto corrispondente ALLARME button once. The alarm indicator will turn off.
Funzione snooze
Quando suona un allarme, premere il tasto grande SNOOZE / DISPLAY DIMMER bar to temporarily silence the alarm. The alarm will sound again after the preset snooze duration.
- Programmable Snooze: To adjust the snooze duration (1-29 minutes), refer to the detailed instructions in the full owner's manual.
Timer per il pisolino
The nap timer allows for a short, temporary alarm without affecting your main alarm settings.
- Premere il tasto PISOLINO pulsante. Il display mostrerà il tempo di riposo predefinito (ad esempio, 5 minuti).
- Utilizzare il + or - buttons to adjust the nap duration.
- The nap timer will start automatically after a few seconds or by pressing PISOLINO Ancora.
- To cancel the nap timer, press ALM RESET.
Dimmer del display
Adjust the brightness of the LED display to your preference.
- Premere il tasto SNOOZE / DISPLAY DIMMER bar (when no alarm is sounding) to cycle through different brightness levels.
Ricarica USB
The clock provides two USB ports for charging your electronic devices.
- La porta etichettata TELEFONI (5W) is suitable for charging smartphones.
- La porta etichettata PHONES/TABLETS (10W) offers faster charging for tablets and quick-charge compatible smartphones.
- Simply connect your device's USB charging cable to the appropriate port on the front of the alarm clock.
Video: An official product video from SDI Technologies, Inc. demonstrating the Timex Alarm Clock with USB Charging Station, RediSet Digital features, including dual USB ports for charging devices and automatic time setting.
Manutenzione
- Pulizia: Pulire l'orologio con un panno morbido e asciutto. Non utilizzare detergenti abrasivi o solventi.
- Sostituzione della batteria: When the "BATT LOW" indicator appears, replace the 3 AAA backup batteries. Use a paper clip to open the battery compartment, replace the batteries, and ensure the compartment is securely closed.
- Cavo di alimentazione: Assicurarsi che il cavo di alimentazione non sia schiacciato o danneggiato.
Risoluzione dei problemi
| Problema | Soluzione |
|---|---|
| Il display dell'orologio è vuoto. | Ensure the AC adapter is securely plugged into a working power outlet. Check if there was a power outage. If using battery backup, ensure batteries are fresh and correctly installed. |
| L'allarme non suona. | Verify that the alarm (ALM 1 or ALM 2) is activated (indicator light on). Check the alarm volume setting (LOUD/SOFT switch). Ensure the alarm time is set correctly (AM/PM). |
| La ricarica USB non funziona. | Ensure the clock is powered on. Check the USB cable for damage and ensure it's properly connected to both the clock and your device. Try a different USB port or device to isolate the issue. |
| Time is incorrect after power connection. | Use the "Time Zone" button to select your correct time zone. Adjust the "DST" switch if Daylight Saving Time is active. |
Specifiche
- Modello: T129B
- Marca: Temporex
- Tipo di visualizzazione: LED digitale
- Fonte di energia: AC Adapter (100V-240V), 3 AAA batteries for backup (not included)
- Porte USB: 1x 5W (for phones), 1x 10W (for tablets/quick-charge phones)
- Dimensioni del prodotto: 6.42"L x 3.03"A
- Peso dell'articolo: 8.8 once
- Materiale: Plastica
- Produttore: SDI Technologies, Inc.
Garanzia e supporto
For warranty information and technical support, please refer to the complete owner's manual included with your product or visit the official Timex webluogo. Conserva la ricevuta di acquisto per eventuali richieste di garanzia.
Componenti inclusi: Manuale del proprietario